oSIST prEN ISO 11612:2023

Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2023)

ISO 11612:2015 specifies performance requirements for protective clothing made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of ISO 11612:2015 are gaiters, hoods, and overboots. However, concerning hoods, requirements for visors and respiratory equipment are not given.
The performance requirements set out in ISO 11612:2015 are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes.

Schutzkleidung - Kleidung zum Schutz gegen Hitze und Flammen - Mindestleistungsanforderungen (ISO/DIS 11612:2023)

Vêtements de protection - Vêtements de protection contre la chaleur et les flammes - Exigences de performance minimales (ISO/DIS 11612:2023)

L'ISO 11612:2015 spécifie les exigences de performance relatives aux vêtements de protection fabriqués avec des matériaux souples, conçus pour protéger le corps de l'utilisateur, sauf les mains, contre la chaleur et/ou les flammes. Pour la protection de la tête et des pieds, les seuls articles d'habillement de protection relevant du domaine d'application de l'ISO 11612:2015 sont les guêtres, les cagoules et les couvre-chaussures. Toutefois, en ce qui concerne les cagoules, aucune exigence n'est donnée pour les visières et les appareils respiratoires.
Les exigences de performance fournies dans l'ISO 11612:2015 sont applicables aux vêtements de protection qui pourraient être portés pour un large éventail d'utilisations finales, où il existe un besoin de vêtements offrant des propriétés de propagation de flamme limitée et où le porteur peut être exposé à une chaleur émise par rayonnement, par convection ou par contact ou à des projections/éclaboussures de métal en fusion.

Varovalna obleka - Obleka za varovanje pred toploto in plamenom - Minimalne zahtevane lastnosti (ISO/DIS 11612:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 12-Nov-2023
• ICS: 13.340.10 - Protective clothing
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 30-Aug-2023
• Due Date: 17-Jan-2024
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Mandate: M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
• Ref Project: prEN ISO 11612 - Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2023)

Relations

• Revises: SIST EN ISO 11612:2015 - Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 11612:2023
01-november-2023
Varovalna obleka - Obleka za varovanje pred toploto in plamenom - Minimalne
zahtevane lastnosti (ISO/DIS 11612:2023)
Protective clothing - Clothing to protect against heat and flame - Minimum performance
requirements (ISO/DIS 11612:2023)
Schutzkleidung - Kleidung zum Schutz gegen Hitze und Flammen -
Mindestleistungsanforderungen (ISO/DIS 11612:2023)
Vêtements de protection - Vêtements de protection contre la chaleur et les flammes -
Exigences de performance minimales (ISO/DIS 11612:2023)
Ta slovenski standard je istoveten z: prEN ISO 11612
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN ISO 11612:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11612:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11612:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11612
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:
2023-08-21 2023-11-13
Protective clothing - Clothing to protect against heat and
flame - Minimum performance requirements
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11612:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11612:2023
ISO/DIS 11612:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11612
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:

Protective clothing - Clothing to protect against heat and
flame - Minimum performance requirements
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 11612:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11612:2023
ISO/DIS 11612:2023(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...