SIST EN 319 412-4 V1.2.1:2022
(Main)Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 4: Certificate profile for web site certificates
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 4: Certificate profile for web site certificates
The present document specifies a certificate profile for web site certificates that are accessed by the TLS protocol [i.1].
The profile defined in the present document builds on the CA/Browser Forum Baseline requirements [2], Extended
validation guidelines [3] and other parts of the present multipart deliverable.
The present document focuses on requirements on certificate content. Requirements on decoding and processing rules
are limited to aspects required to process certificate content defined in the present document. Further processing
requirements are only specified for cases where it adds information that is necessary for the sake of interoperability.
This profile can be used for legal and natural persons. For certificates issued to legal persons, the profile builds on the
CAB Forum EV Profile [3] or baseline requirements [2]. For certificates issued to natural persons, the profile builds
only on CAB Forum baseline requirements [2].
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 4. del: Profil potrdila za potrdila za spletna mesta
Ta dokument določa profil certifikata za potrdila za spletna mesta, do katerih dostopa protokol TLS [i.1]. Profil, opredeljen v tem dokumentu, temelji na osnovnih zahtevah organa CA/Browser Forum [2], razširjenih smernicah za potrjevanje [3] in drugih delih tega večdelnega dokumenta. Ta dokument se osredotoča na zahteve za vsebino digitalnih potrdil. Zahteve za pravila o dekodiranju in obdelavi so omejene na vidike, potrebne za obdelavo vsebine digitalnih potrdil, opredeljene v tem dokumentu. Dodatne zahteve za obdelavo so opredeljene le za primere, v katerih navajajo dodatne informacije, ki so potrebne za interoperabilnost. Ta profil se lahko uporablja za fizične in pravne osebe. Za potrdila, ki se izdajajo pravnim osebam, profil temelji na profilu EV [3] ali osnovnih zahtevah [2] organa CA/Browser Forum. Za potrdila, ki se izdajajo fizičnim osebam, profil temelji le na osnovnih zahtevah [2] organa CA/Browser Forum.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 319 412-4 V1.2.1:2022
01-januar-2022
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 4. del: Profil potrdila za
potrdila za spletna mesta
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 4: Certificate
profile for web site certificates
Ta slovenski standard je istoveten z: ETSI EN 319 412-4 V1.2.1 (2021-11)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST EN 319 412-4 V1.2.1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 319 412-4 V1.2.1:2022
---------------------- Page: 2 ----------------------
SIST EN 319 412-4 V1.2.1:2022
ETSI EN 319 412-4 V1.2.1 (2021-11)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 4: Certificate profile for web site certificates
---------------------- Page: 3 ----------------------
SIST EN 319 412-4 V1.2.1:2022
2 ETSI EN 319 412-4 V1.2.1 (2021-11)
Reference
REN/ESI-0019412-4v121
Keywords
electronic signature, IP, profile, security, trust
services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 319 412-4 V1.2.1:2022
3 ETSI EN 319 412-4 V1.2.1 (2021-11)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic profile requirements . 7
4.1.1 Certificates following DVCP, IVCP or OVCP . 7
4.1.2 Certificates following EVCP or QEVCP-w . 8
4.1.3 Certificates following NCP or QNCP-w . 8
4.2 EU Qualified Certificate statements for Certificates following QEVCP-w or QNCP-w . 8
4.3 Certificate policies for Certificates following QEVCP-w or QNCP-w . 8
Annex A (informative): Change history . 9
History . 10
ETSI
---------------------- Page: 5 ----------------------
SIST EN 319 412-4 V1.2.1:2022
4 ETSI EN 319 412-4 V1.2.1 (2021-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 4 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.5].
National transposition dates
Date of adoption of this EN: 9 November 2021
Date of latest announcement of this EN (doa): 28 February 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2022
Date of withdrawal of any conflicting National Standard (dow): 31 August 2022
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
SIST EN 319 412-4 V1.2.1:2022
5 ETSI EN 319 412-4 V1.2.1 (2021-11)
Introduction
ITU and ISO issued standards for certification of public keys in ITU X.509 | ISO/IEC 9594-8 [i.4] which are used for
the security of communications a
...
ETSI EN 319 412-4 V1.2.1 (2021-11)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 4: Certificate profile for web site certificates
---------------------- Page: 1 ----------------------
2 ETSI EN 319 412-4 V1.2.1 (2021-11)
Reference
REN/ESI-0019412-4v121
Keywords
electronic signature, IP, profile, security, trust
services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 319 412-4 V1.2.1 (2021-11)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic profile requirements . 7
4.1.1 Certificates following DVCP, IVCP or OVCP . 7
4.1.2 Certificates following EVCP or QEVCP-w . 8
4.1.3 Certificates following NCP or QNCP-w . 8
4.2 EU Qualified Certificate statements for Certificates following QEVCP-w or QNCP-w . 8
4.3 Certificate policies for Certificates following QEVCP-w or QNCP-w . 8
Annex A (informative): Change history . 9
History . 10
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 319 412-4 V1.2.1 (2021-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 4 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.5].
National transposition dates
Date of adoption of this EN: 9 November 2021
Date of latest announcement of this EN (doa): 28 February 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2022
Date of withdrawal of any conflicting National Standard (dow): 31 August 2022
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 319 412-4 V1.2.1 (2021-11)
Introduction
ITU and ISO issued standards for certification of public keys in ITU X.509 | ISO/IEC 9594-8 [i.4] which are used for
the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.3] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specific types of certificates named "qualified certificates". Implementation of
...
Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 4: Certificate profile for web site certificates
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Reference
REN/ESI-0019412-4v121
Keywords
electronic signature, IP, profile, security, trust
services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic profile requirements . 7
4.1.1 Certificates following DVCP, IVCP or OVCP . 7
4.1.2 Certificates following EVCP or QEVCP-w . 8
4.1.3 Certificates following NCP or QNCP-w . 8
4.2 EU Qualified Certificate statements for Certificates following QEVCP-w or QNCP-w . 8
4.3 Certificate policies for Certificates following QEVCP-w or QNCP-w . 8
Annex A (informative): Change history . 9
History . 10
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 4 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.5].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Introduction
ITU and ISO issued standards for certification of public keys in ITU X.509 | ISO/IEC 9594-8 [i.4] which are used for
the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.3] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specif
...
SLOVENSKI STANDARD
oSIST prEN 319 412-4 V1.2.0:2021
01-oktober-2021
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 4. del: Profil potrdila za
potrdila za spletna mesta
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 4: Certificate
profile for web site certificates
Ta slovenski standard je istoveten z: ETSI EN 319 412-4 V1.2.0 (2021-08)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
oSIST prEN 319 412-4 V1.2.0:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
---------------------- Page: 2 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 4: Certificate profile for web site certificates
---------------------- Page: 3 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
2 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Reference
REN/ESI-0019412-4v121
Keywords
electronic signature, IP, profile, security, trust
services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
3 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic profile requirements . 7
4.1.1 Certificates following DVCP, IVCP or OVCP . 7
4.1.2 Certificates following EVCP or QEVCP-w . 8
4.1.3 Certificates following NCP or QNCP-w . 8
4.2 EU Qualified Certificate statements for Certificates following QEVCP-w or QNCP-w . 8
4.3 Certificate policies for Certificates following QEVCP-w or QNCP-w . 8
Annex A (informative): Change history . 9
History . 10
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
4 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 4 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.5].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 319 412-4 V1.2.0:2021
5 Draft ETSI EN 319 412-4 V1.2.0 (2021-08)
Introduction
ITU and ISO issued standards for certification of public keys in ITU
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.