SIST EN 13035-3:2004/kprA1:2009
(Amendment)Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: Schneidmaschinen
Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 3: Machines à découper
Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 3. del: Rezalniki
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13035-3:2004/kprA1:2009
01-april-2009
Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne
zahteve - 3. del: Rezalniki
Machines and plants for the manufacture, treatment and processing of flat glass - Safety
requirements - Part 3: Cutting machines
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas -
Sicherheitsanforderungen - Teil 3: Schneidmaschinen
Machines et installations pour la production, le façonnage et la transformation du verre
plat - Exigences de sécurité - Partie 3: Machines à découper
Ta slovenski standard je istoveten z: EN 13035-3:2003/prA1
ICS:
81.100 2SUHPD]DVWHNODUVNRLQ Equipment for the glass and
NHUDPLþQRLQGXVWULMR ceramics industries
SIST EN 13035-3:2004/kprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13035-3:2004/kprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 13035-3:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2009
ICS 81.100
English Version
Machines and plants for the manufacture, treatment and
processing of flat glass - Safety requirements - Part 3: Cutting
machines
Machines et installations pour la production, le façonnage Maschinen und Anlagen für die Herstellung, Be- und
et la transformation du verre plat - Exigences de sécurité - Verarbeitung von Flachglas - Sicherheitsanforderungen -
Partie 3: Machines à découper Teil 3: Schneidmaschinen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 13035-3:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13035-3:2003/prA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EN 13035-3:2003/prA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the Introduction .4
2 Modifications to the Scope .4
3 Modifications to Clause 2 .4
4 Modification to Clause 3 .5
5 Modification to Clause 4 .6
6 Modifications to Clause 5 .6
7 Modification to Clause 6 .8
8 Modifications to Clause 7 .9
9 Addition of Annex K . 10
10 Modification to Annex ZA . 12
11 Addition of Annex ZB . 13
12 Modifications to the Bibliography . 13
2
---------------------- Page: 4 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EN 13035-3:2003/prA1:2009 (E)
Foreword
This document (EN 13035-3:2003/prA1:2009) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines — Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
3
---------------------- Page: 5 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EN 13035-3:2003/prA1:2009 (E)
1 Modification to the Introduction
st
1 para:
Replace the reference to “EN 1070” with “EN ISO 12100-1”.
2 Modifications to the Scope
st nd
Replace 1.2, 1 and 2 sentence, with:
“This European Standard deals with all significant hazards, hazardous situations and events relevant to flat
glass cutting machines, when they are used as intended and under the conditions of misuse which are rea-
sonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical
measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation
and maintenance.”
1.4 Replace:
“prEN 13035-5” with “EN 13035-5” and
“prEN 13035-6” with “EN 13035-6”.
1.6 Replace:
“prEN 13035-7” with “EN 13035-7”.
3 Modifications to Clause 2
st
Replace 1 para with:
“The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.”
Delete:
“EN 292-1, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology,
methodology.
EN 292-2, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles
and specifications.
EN 292-2:1991/A1:1995, Safety of machinery — Basic concepts, general principles for design — Part 2:
Technical principles and specifications.
EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design.
EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles
for design.
EN 1070:1998, Safety of machinery — Terminology.”
Update "EN 60204-1:1997" and "EN 61496-1" as follows:
4
---------------------- Page: 6 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EN 13035-3:2003/prA1:2009 (E)
“EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
(IEC 60204-1:2005, modified)
EN 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment — Part 1: General require-
ments and tests (IEC 61496-1:2004, modified)”
Delete:
“prEN 61496-2:1997, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular re-
quirements for equipment using active opto-electronic protective devices (draft IEC 61496-2:1997).”
Add:
“EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pres-
sure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)
EN ISO 3746:1995, Acoustics — Determination of sound power levels of noise sources using sound pres-
sure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995)
EN ISO 3747:2000, Acoustics — Determination of sound power levels of noise sources using sound pres-
sure — Comparison method for use in situ (ISO 3747:2000)
EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and
equipment (ISO 4871:1996)
EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission
sound pressure levels at a work station and at other specified positions — Engineering method in an essen-
tially free field over a reflecting plane (ISO 11201:1995)
EN ISO 11202:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission
sound pressure levels at a work station and at other specified positions — Survey method in situ
(ISO 11202:1995)
EN ISO 11204:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission
sound pressure levels at a work station and at other specified positions — Method requiring environmental
corrections (ISO 11204:1995)
EN ISO 11688-1:1998, Acoustics — Recommended practice for the design of low-noise machinery and
equipment — Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Tech-
nical principles (ISO 12100-2:2003)
EN ISO 13849-1:2008, Safety of machinery — Safety-related parts of control systems — Part 1: General prin-
ciples for design (ISO 13849-1:2006)
EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006)
CLC/TS 61496-2, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular require-
ments for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)”.
4 Modification to Clause 3
st
1 paragraph:
5
---------------------- Page: 7 ----------------------
SIST EN 13035-3:2004/kprA1:2009
EN 13035-3:2003/prA1:2009 (E)
Replace reference to “EN 1070:1998” with “EN ISO 12100-1:2003”.
5 Modification to Clause 4
Add the reference to 5.2.5 as preventive measures in the last column to the following clauses:
4.1.1 to 4.1.1.8 and 4.1.3 to 4.1.5
Add 4.7 as follows: “
Preventive
Danger zone –
Hazards measures
Dangerous item
see clause
drive mechanism, fan 5.4, 7.1.1, Annex K
4.7 Hazards by noise may result in hearing dam-
age, tinnitus, stress, in accidents due to inter-
ference with speech communication and with
the perception of acoustic signals
"
6 Modifications to Clause 5
st
Introduction, replace 1 paragraph with:
“Machinery shall comply with the safety requirements and/or protective measures of this clause.
In addition, the machine shall be designed according to the principles of EN ISO 12100 for relevant but not
significant hazards which are not dealt with by this document.”
NOTE: replace: “EN 418” with “EN ISO 13850”.
Replace 5.1.11.1 with:
“5.1.11.1 unintended movements are stopped by sensors when the cutting head goes down too deep. The
control shall conform to the requirements of EN ISO 13849-1:2008, performance level d, e. g. using dynamic
monitoring; the control shall be constructed in such a way that at least after each command to switch on, the
cutting head is moved down to the table as a positive check before a start is possible, and,”
Replace 5.1.12 with:
“5.1.12 The movement of the cutting head in the cutting position shall be interlocked with the transportation
system including the air cushion in such a way that the two functions are not possible at the same time. The
interlocking shall conform to the requirements of EN ISO 13849-1:2008, performance level b.”
Replace 5.1.17 to 5.1.21 with:
“5.1.17 Latching-in stop control devices (switches) in accordance with EN 1037:1995, 6.3.2, and conforming
to the requirements of EN ISO 13849-1:2008, performance level c, shall be provided near to the table to be
able to prevent an unexpected start-up of the cutting machine by other persons or by a failure of the control. A
new start shall only be possible after the actuated device is reset manually.
5.1.18 Stopping by means of safety measures shall be achieved either by the immediate disconnection of the
energy supply (EN 60204-1:2006, 9.2.2, category 0) or by electronically controlled braking and the subse-
quent interruption of the energy supply using contacts, e. g. via a timing element after the op
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.