SIST EN 13035-3:2004+A1:2009
(Main)Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine.
1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant.
1.3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers.
1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see EN 13035-5 and EN 13035-6).
1.5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified.
1.6 This standard does not apply to cutting of laminated glass (see EN 13035-7).
1.7 This standard does not apply to cutting while the glass is moving.
1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: Schneidmaschinen
Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 3: Machines à découper
1.1 La présente norme contient les prescriptions de sécurité relatives à la conception et à l'installation de machines
à découper le verre plat qui fonctionnent par gravure du verre qui repose sur un support horizontal. La présente nome
couvre le transport du verre sur la machine.
1.2 !La présente Norme européenne traite des phénomènes dangereux significatifs, des situations
dangereuses et des événements dangereux relatifs aux machines à découper le verre plat, lorsqu'elles sont utilisées
comme prévu et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant (voir Article 4).
La présente Norme spécifie les mesures techniques appropriées permettant d’éliminer ou de réduire les risques dus
aux phénomènes dangereux significatifs pendant l’installation, le fonctionnement et la maintenance." Le bruit n’est
pas considéré comme un phénomène dangereux significatif.
1.3 La présente norme ne s'applique pas au découpage du verre plat par abrasion ou à l'aide d'un liquide à haute
pression ou de lasers.
1.4 La présente norme ne s'applique pas au chargement et au déchargement du verre plat sur les machines
à découper ni au rompage (voir !EN 13035-5" et !EN 13035-6").
1.5 La présente norme ne s’applique pas aux convoyeurs (voir EN 619) ni aux ventilateurs utilisés comme partie
intégrante des machines. Si des risques spécifiques peuvent apparaître par une utilisation avec les machines
à découper, des mesures particulières sont spécifiées.
1.6 La présente norme ne s'applique pas au découpage du verre feuilleté (voir le !EN 13035-7").
1.7 La présente norme ne s'applique pas au découpage du verre pendant son déplacement.
1.8 Le présent document ne s’applique pas aux machines à découper le verre plat qui sont fabriquées avant la
date de publication de ce document par le CEN.
Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 3. del: Rezalniki
Ta standard vsebuje varnostne zahteve za načrtovanje in postavitev strojev z enim premičnim mostom za rezanje ravnega stekla, ki deluje tako, da zarezuje na steklo, položeno na vodoravno podporo. Ta standard zajema transport stekla na stroju. Ta evropski standard obravnava velike nevarnosti, nevarne situacije in primere, ki se nanašajo na stroje za rezanje ravnega stekla, kadar se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4). Ta evropski standard opredeljuje ustrezne tehnične ukrepe za odpravo ali zmanjševanje tveganj, ki nastanejo zaradi velikih nevarnosti med usposobitvijo za zagon, obratovanjem in vzdrževanjem. Nevarnosti zaradi hrupa se ne štejejo za velike.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 3. del: RezalnikiMaschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: SchneidmaschinenMachines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 3: Machines à découperMachines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines81.100Equipment for the glass and ceramics industriesICS:Ta slovenski standard je istoveten z:EN 13035-3:2003+A1:2009SIST EN 13035-3:2004+A1:2009en01-oktober-2009SIST EN 13035-3:2004+A1:2009SLOVENSKI
STANDARD
SIST EN 13035-3:2004+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13035-3:2003+A1
August 2009 ICS 81.100 Supersedes EN 13035-3:2003English Version
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 3: Machines à découper
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: Schneidmaschinen This European Standard was approved by CEN on 23 May 2003 and includes Amendment 1 approved by CEN on 23 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-3:2003+A1:2009: ESIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 2 Contents Page Foreword . 30Introduction . 41Scope . 42Normative references . 43Terms and definitions . 64List of significant hazards . 65Safety requirements and/or protective measures . 85.1Common requirements . 85.2Additional special safety requirements for flat glass cutting tables where access is not intended . 105.3Additional special safety requirements for flat glass cutting tables where access is intended . 116Verification of safety requirements and/or protective measures . 127Information for use . 12Annex A (normative)
Perimeter fencing . 15Annex B (normative)
Photo-electric guarding . 16Annex C (normative)
Photo-electric guarding with barrier rail . 17Annex D (normative)
Fixed distance guard . 18Annex E (normative)
Photo-electric guarding . 19Annex F (normative)
Reflex photo-electric sensors (single light beam scanners) and push-away bars . 20Annex G (normative)
Stopping operation by safety measures . 21Annex H (informative)
Electrical interlocking of movable guards . 22Annex I (informative)
Danger zones on cutting machines . 23Annex J (informative)
Synopsis of possible methods of safeguarding according to 5.2 and 5.3 . 24Annex K (normative)
!!!!Noise-test code . 25K.1A-weighted emission sound pressure level determination . 25K.2A-weighted emission sound power level determination . 25K.3Installation and mounting conditions . 25K.4Operating conditions . 25K.5Measurement uncertainties . 26K.6Information to be recorded . 26K.7Information to be reported . 26Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by 98/79/EC . 27Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 28Bibliography . 29
SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 3 Foreword This document (EN 13035-3:2003+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines – Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-23. This document supersedes EN 13035-3:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags
!". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EC Directive(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document." !Annexes A to G and K are normative. Annexes H, I and J are informative." This document is one of a series concerning machinery for the treatment and processing of flat glass. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 4 0 Introduction This document is a type-C standard as stated in !EN ISO 12100-1". The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type-C standard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. 1 Scope 1.1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support.
This standard covers the transport of the glass on the machine. 1.2 !!!!This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." Hazards from noise are not considered to be significant. 1.3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see !EN 13035-5" and !EN 13035-6"). 1.5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery.
If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6 This standard does not apply to cutting of laminated glass (see !EN 13035-7"). 1.7 This standard does not apply to cutting while the glass is moving. 1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text" EN 294:1992, Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body !deleted text" SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 5 EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards !deleted text" EN 999:1998, Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery - Prevention of unexpected start-up !deleted text" !EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2005, modified) EN 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests (IEC 61496-1:2004, modified)" !deleted text" !EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 3747:2000, Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method for use in situ (ISO 3747:2000) EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11202:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ (ISO 11202:1995) EN ISO 11204:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections (ISO 11204:1995) EN ISO 11688-1:1998, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13849-1:2008, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006) CLC/TS 61496-2:2006, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)" SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 6 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in !EN ISO 12100-1:2003" apply. Additional terms and definitions specifically needed for this document are added below: 3.1 cutting tool component for scoring the surface of flat glass 3.2 cutting head mounting assembly for moving the cutting tool vertically 3.3 carriage mounting assembly for moving the cutting head on the axis of the cutting bridge 3.4 (cutting) bridge movable horizontal guide for the carriage 3.5 cutting table supporting surface on which the flat glass is placed to be scored 3.6 longitudinal sides (of the table) edges (of the table) parallel to the direction of the travel of the cutting bridge 3.7 small sides (of the table) edges (of the table) transverse to the direction of the travel of the cutting bridge 3.8 transport device equipment for the horizontal moving of the flat glass sheets on the cutting table 3.9 air cushion bed of air with a pressure higher than atmospheric between the surface of the table and the sheet of glass to lower friction during horizontal transport of the glass 3.10 movable positioning stop mechanical device which can be brought to a place higher than the surface of the table to hold the flat glass in place for cutting and which can be retracted 3.11 energy chain composition of links supporting and guarding flexible cables and hoses 4 List of significant hazards This clause contains all the significant hazards, hazardous situations and events, as far as they are dealt with in this standard, identified by risk assessment as significant for this type of machinery and which require action to eliminate or reduce the risk. In annex I (informative) some danger zones on cutting machines are presented graphically. Before using the standard it is important to carry out a general risk assessment of the machine in question. NOTE Application of B-level standards see clause 5. SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 7 !!!!Table 1 – List of significant hazards""""
Hazards
Danger zone – Dangerous item Preventive
measures see clause 4.1 Mechanical
4.1.1 Crushing
!5.2.5" 4.1.1.1 Crushing of the body bridge/fixed parts outside the table, e.g. control panel 5.1.1; 7.1.8, !5.2.5" 4.1.1.2 Crushing of the arm bridge or its drive shaft/table with or without glass for a gap < 120 mm 5.2-5.3.1; 5.3.3, !5.2.5" 4.1.1.3 Crushing of the arm bridge with energy chain/energy chain support 5.1.2, !5.2.5" 4.1.1.4 Crushing of the hand or of the fingers mechanical stop/cutting bridge 5.1.3, !5.2.5" 4.1.1.5 Crushing of the fingers carriage/bridge and stop 5.1.4, !5.2.5" 4.1.1.6 Crushing of the fingers wheels/guide rails and their mountings 5.1.5; 5.1.6, !5.2.5" 4.1.1.7 Crushing of the fingers limit switch/operating means 5.1.7, !5.2.5" 4.1.1.8 Crushing of the finger (-tip) positioning stop/table platform 5.1.8, !5.2.5" 4.1.2 Cutting flat glass 7.1.5 4.1.3 Entanglement drive shaft of the bridge 5.1.9, !5.2.5" 4.1.4 Drawing-in of the arm bridge or its drive shaft/table with or without glass for a gap < 120 mm 5.2-5.3.1; 5.3.3, !5.2.5" 4.1.5 Impact bridge 5.2-5.3.2, !5.2.5" 4.2 Electrical direct or indirect contact 5.1.21 4.3 Neglected use of personal protective equipment cuts from sharp glass 7.1.5 4.4 Unexpected start-up (or malfunction) from:
4.4.1 Failure of the control system all dangerous movements 5.1.16; 5.1.17; 7.1.9 4.4.2 Disorder of the control sequence glass being pushed off the table 5.1.11; 5.1.12 4.4.3 Restoration of energy supply after interruption all dangerous movements 5.1.15 4.4.4 Errors made by the operator all dangerous movements 5.1.14; 5.1.17; 7.1.9 4.5 Impossibility of stopping in the best possible conditions all dangerous movements 5.1.13; 5.1.18; 5.1.19; 7.1.10 4.6 Slip, trip, fall of persons
4.6.1 Slip glass bits 7.1.7 4.6.2 Trip cables between control panel and table 5.1.10 SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 8
Hazards
Danger zone – Dangerous item Preventive
measures see clause !4.7 Hazards by noise may result in hearing damage, tinnitus, stress, in accidents due to interference with speech communication and with the perception of acoustic signals drive mechanism, fan 5.4, 7.1.1, Annex K" 5 Safety requirements and/or protective measures !Machinery shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN ISO 12100 for relevant but not significant hazards which are not dealt with by this document." NOTE For hazards not covered by this European standard which are to be reduced by the applications of a B-level standard such as EN 294, !EN ISO 13850", EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, the manufacturer should carry out an adequate risk assessment to establish the requirements of the B standard to be applied.
This specific risk assessment should be part of the general risk assessment of the machine. Where the means of reducing the risk is by the arrangement of the installed machine or by a safe system of work, the manufacturer shall include in the Information for use a reference to the reduction means to be provided, and to any limiting value of the requirement and, if appropriate, to the means of verification. 5.1 Common requirements 5.1.1 To avoid the risk of crushing a person’s body by a moving bridge, there shall be a minimum gap of 0,5 m (see Table 1 of EN 349:1993) between the outermost protruding parts of an accessible bridge (see NOTE) and the fixed parts outside the table, such as control panel/console.
Where the danger zone can be reached only through interlocked movable guards there shall be a minimum gap of 0,4 m between the outermost protruding parts and the fixed parts of the guards. NOTE The moving bridge is considered to be accessible when safety measures do not stop the movement before the arrival of a person at the danger zone. 5.1.2 Crushing points within reach of a person1) between the energy chain and/or the bridge assembly shall be protected by either: 5.1.2.1 locating the crushing points under the table with a minimum distance between crushing point and the edge of the table of 100 mm, or 5.1.2.2 a guard (cover) which protects against directly reaching the crushing points from outside the table 5.1.3 Crushing points within reach of a person1) between the mechanical stop and the bridge shall be avoided by a minimum gap conforming to Table 1 of EN 349:1993 of either: 5.1.3.1 100 mm, when the stop is directly accessible, or 5.1.3.2 25 mm, when the stop is located under the table. 5.1.4 Crushing points within reach of a person1) between the carriage and bridge construction and the mechanical stop shall be avoided by a minimum gap of 25 mm according to Table 1 of EN 349:1993. 5.1.5 Wheels within reach of a person1) shall be equipped with screens (sweepers) on both sides of each wheel extending down to the surface of the guide rails.
1) Danger zones are not within reach of a person where measures shown in annexes A, B or D are fulfilled.
SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 9 5.1.6 The fixing of guide rails within reach of a person1) shall be continuously smooth. 5.1.7 The risk of the crushing of fingers between limit switches (position detectors) and operating means within reach of a person1) shall be avoided or safeguarded by: 5.1.7.1 limit switches with spring-loaded levers so that a minimum gap of 25 mm is maintained or 5.1.7.2 limit switches which are mounted under the table. 5.1.8 A minimum gap of 15 mm shall be left between the movable positioning stops and the table surface within reach of a person1). 5.1.9 To avoid entanglement, the drive shaft within reach of a person1) shall have a completely smooth surface or shall be safeguarded, e.g. by fixed enclosing guards (see 3.2.1 of EN 953:1997). 5.1.10 Cable ducts between the control panel and the table shall be located at floor level and be below the floor surface or otherwise covered. 5.1.11 To avoid glass sheets being moved from the table by driving the cutting head against the edge of a sheet of glass, the cutting head shall be constructed in such a way that: !!!! 5.1.11.1 unintended movements are stopped by sensors when the cutting head goes down too deep.
The control shall conform to the requirements of EN ISO 13849-1:2008, performance level d, e. g. using dynamic monitoring; the control shall be constructed in such a way that at least after each command to switch on, the cutting head is moved down to the table as a positive check before a start is possible, and," 5.1.11.2 an intended break of the cutting head occurs, or, 5.1.11.3 a restriction of the power of drive is made in such a way that it is impossible to throw off the sheets, or, 5.1.11.4 installed rollers lift the cutting head. !!!! 5.1.12 The movement of the cutting head in the cutting position shall be interlocked with the transportation system including the air cushion in such a way that the two functions are not possible at the same time. The interlocking shall conform to the requirements of EN ISO 13849-1:2008, performance level b." 5.1.13 A lockable master switch in accordance with EN 60204-1 for isolating the cutting machine shall be provided at the control station. 5.1.14 Start and stop control devices for the cutting machine shall be separate and shall be positioned in such a way that it is possible to see that there are no exposed persons in the danger zone. 5.1.15 The control of the cutting machine shall be designed in such a way that no part of the machine moves at the switching on of power or on the recovery of power supply and switching the mode selector. 5.1.16 An unexpected start-up (see EN 1037) by one failure shall not be possible by the use of either: 5.1.16.1 a hard-wired circuit, or 5.1.16.2 a standstill monitor using hardware-based logic to cut-off power at the beginning of a miss-start, or, 5.1.16.3 a dual-port electronic control with fail-safe comparator. ! 5.1.17 Latching-in stop control devices (switches) in accordance with EN 1037:1995, 6.3.2, and conforming to the requirements of EN ISO 13849-1:2008, performance level c, shall be provided near to the table to be able to SIST EN 13035-3:2004+A1:2009
EN 13035-3:2003+A1:2009 (E) 10 prevent an unexpected start-up of the cutting machine by other persons or by a failure of the control. A new start shall only be possible after the actuated device is reset manually. 5.1.18 Stopping by means of safety measures shall be achieved either by the immediate disconnection of the energy supply (EN 60204-1:2006, 9.2.2, category 0) or by electronically controlled braking and the subsequent interruption of the energy supply using contacts, e. g. via a timing element after the operation has been stopped (EN 60204-1:2006, 9.2.2, category 1). In this case, the time-dependent cut-out shall be monitored, e. g. electronically according to Annex G (normative). Where category 0 is used, mechanical brakes shall be applied. 5.1.19 At the control panel and at each working side of the cutting table, where the squaring and the take-off is done by operators, emergency-stop equipment in accordance with EN ISO 13850:2008, 4.4.3, shall be provided within reach of the operator. The emergency stop shall function according to 5.1.18. Provisions shall be made to ensure that emergency stopping can also be effected on other machines linked to the operation of the cutting machine when this would otherwise introduce a significant hazard. The emergency stop (manually operated actuator) devices shall be situated at the height of the table. 5.1.20 After a stop command has been initiated by protective devices described in 5.2 and 5.3, a restart shall be possible only after a switch (a manual reset device) conforming to the requirements of EN ISO 13849-1:2008, 5.2.2, has been actuated at a place from where there is a good view of the danger zone. This switch shall be mounted in such a way that its operation from inside the danger zone is impossible. 5.1.21 All electrical equipment shall conform to the requirements of EN 60204-1 with regard to the protection against electrical shock (see EN 60204-1:2006, Clause 6)." 5.2 Additional special safety requirements for flat glass cutting tables where access is not intended NOTE For a synopsis of possible methods of safeguarding according to 5.2 and 5.3 (in respect of the operation mode and the speed of the cutting bridge) see annex J (informative). Flat glass cutting machines where under normal operating conditions access by persons is not intended shall be provided with safety measures to avoid the risk of impact and the risk of crushing and drawing-in of the arm by the bridge or its drive shaft.
Dangerous movements shall have stopped before the danger zone can be reached by any person. ! 5.2.1 A 1,4 m minimum height fixed perimeter fence in accordance with Annex A (normative) shall be provided at each side of the machine. Access shall be provided by movable interlocking guards (see EN 953:1997, 3.3 and 3.5) to both longitudinal sides of the table or photo-electric guarding with one photo-electric sensing unit according to EN 61496-1:2004, type 4, and CLC/TS 61496-2:2006, Annex B (normative) or Annex C (normative)." 5.2.2 However, if there is no free space to use method 5.2.1, fixed distance guards close to the danger zone shall be provided at each side of the machine in accordance with annex D.
Access shall be provided by movable interlocking guards with guard locking (see 3.2, 3.2.2, 3.3 and 3.6 of EN 953:1997) to both longitudinal sides of the table in the area of the ground (zero) position of the bridge. 5.2.3 The small sides of the cutting machine shall be guarded by fixed distance guards in conformity to EN 953 or photoelectric guarding, or adjacent bordering components.
Where adjacent bordering components are to be used details of proximity and safety attributes shall be included in the Information for use. ! 5.2.4 The control system associated with the interlocking of guards shall be in accordance with the requirements of EN ISO 13849-1:2008, performance level d. Annex H (informative) gives an example for an interlocking guard without guard locking incorporating two cam-operated position detectors according to EN 1088:1995, Ann
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.