SIST-TP CEN ISO/TR 20572:2007

Footwear - Performance requirements for components for footwear - Accessories (ISO/TR 20572:2007)

This Technical Report establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners) for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements. This Technical Report applies to accessories (laces and eyelets, metal components and touch and close fasteners) for all kind of footwear as defined in Clause 3. This Technical Report is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification of finished shoes destined for the consumer.

Schuhe - Anforderungen an das Gebrauchsverhalten von Schuhbestandteilen - Zubehörteile (ISO/TR 20572:2007)

Dieser Technische Bericht führt die Anforderungen an das Gebrauchsverhalten von Zubehör (Schnürsenkel und Ösen, Bestand¬teile aus Metall sowie Haftverschlüsse) für Schuhe (nicht für fertige Schuhe) unabhängig vom Material ein, um die Eignung für den vorgesehenen Verwendungszweck zu bewerten.
Er führt ebenfalls die Prüfverfahren zur Bewertung der Konformität mit den Anforderungen ein.
Dieser Technische Bericht gilt für Zubehör (Schnürsenkel und Ösen, Bestandteile aus Metall sowie Haft¬verschlüsse) für jede Art von Schuhen, wie in Abschnitt 3 definiert.
Dieser Technische Bericht ist als Bezug zwischen Hersteller und Lieferant vorgesehen. Er ist nicht für die Drittstellenzertifizierung von fertigen Schuhen für den Verbraucher vorgesehen.

Chaussures - Exigences de performance pour les composants des chaussures - Accessoires (ISO/TR 20572:2007)

Obutev - Zahtevane lastnosti za sestavne dele obutve - Dodatki (ISO/TR 20572:2007)

General Information

• Status: Published
• Publication Date: 25-Apr-2007
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Apr-2007
• Due Date: 25-Jun-2007
• Completion Date: 26-Apr-2007
• Ref Project: CEN ISO/TR 20572:2007 - Footwear - Performance requirements for components for footwear - Accessories (ISO/TR 20572:2007)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 20572:2007
01-maj-2007
Obutev - Zahtevane lastnosti za sestavne dele obutve - Dodatki (ISO/TR
20572:2007)
Footwear - Performance requirements for components for footwear - Accessories
(ISO/TR 20572:2007)
Schuhe - Anforderungen an das Gebrauchsverhalten von Schuhbestandteilen -
Zubehörteile (ISO/TR 20572:2007)
Chaussures - Exigences de performance pour les composants des chaussures -
Accessoires (ISO/TR 20572:2007)
Ta slovenski standard je istoveten z: CEN ISO/TR 20572:2007
ICS:
61.060 Obuvala Footwear
SIST-TP CEN ISO/TR 20572:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL REPORT
CEN ISO/TR 20572
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
February 2007
ICS 61.060

English Version
Footwear - Performance requirements for components for
footwear - Accessories (ISO/TR 20572:2007)
Chaussures - Exigences de performance pour les Schuhe - Anforderungen an das Gebrauchsverhalten von
composants des chaussures - Accessoires (ISO/TR Schuhbestandteilen - Zubehörteile (ISO/TR 20572:2007)
20572:2007)
This Technical Report was approved by CEN on 21 August 2006. It has been drawn up by the Technical Committee CEN/TC 309.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20572:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN ISO/TR 20572:2007 (E)








Foreword


This document (CEN ISO/TR 20572:2007) has been prepared by Technical Committee
CEN/TC 309 "Footwear", the secretariat of which is held by AENOR, in collaboration with Technical
Committee ISO/TC 216 "Footwear".

2

---------------------- Page: 3 ----------------------

TECHNICAL ISO/TR
REPORT 20572
First edition
2007-02-15

Footwear — Performance requirements
for components for footwear —
Accessories
Chaussures — Exigences de performance pour les composants des
chaussures — Accessoires




Reference number
ISO/TR 20572:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO/TR 20572:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2007 – All rights reserved

---------------------- Page: 5 ----------------------

ISO/TR 20572:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard (“state of the art”, for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 20572 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 309, Footwear, in collaboration with Technical Committee ISO/TC 216, Footwear, in accordance with
the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

© ISO 2007 – All rights reserved iii

-----------
...