SIST EN ISO 3928:2007
(Main)Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)
Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)
This International Standard specifies: the die cavity dimensions used for making fatigue test pieces by pressing and sintering, together with certain dimensions of the test piece obtained from such a die; the dimensions of the test pieces machined from sintered and powder forged materials. This International Standard is applicable to all sintered metals and alloys, excluding hardmetals.
Sintermetallwerkstoffe, ausgenommen Hartmetalle - Probekörper für die Ermüdungsprüfung (ISO 3928:1999)
Diese Internationale Norm legt
- die Maße für die zur Herstellung der Probekörper durch Pressen und Sintern verwendeten Matrizen fest, zusammen mit bestimmten Maßen des Probekörpers, der in einer solchen Matrize hergestellt wurde; ferner
- die Maße von Probekörpern aus Sinter- und Pulverschmiedewerkstoffen für die Ermüdungsprüfung.
Diese Internationale Norm gilt für alle Sintermetalle und -legierungen, ausgenommen Hartmetalle.
Matériaux métalliques frittés, a l'exclusion des métaux-durs - Eprouvettes pour essais de fatigue (ISO 3928:1999)
Sintrane kovine brez trdin - Preskušanci za preskus utrujenosti (ISO 3928:1999)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3928:2007
01-januar-2007
Sintrane kovine brez trdin - Preskušanci za preskus utrujenosti (ISO 3928:1999)
Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)
Sintermetallwerkstoffe, ausgenommen Hartmetalle - Probekörper für die
Ermüdungsprüfung (ISO 3928:1999)
Matériaux métalliques frittés, a l'exclusion des métaux-durs - Eprouvettes pour essais de
fatigue (ISO 3928:1999)
Ta slovenski standard je istoveten z: EN ISO 3928:2006
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3928:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 3928
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 77.160; 77.040.10
English Version
Sintered metal materials, excluding hardmetals - Fatigue test
pieces (ISO 3928:1999)
Matériaux métalliques frittés, à l'exclusion des métaux-durs Sintermetallwerkstoffe, ausgenommen Hartmetalle -
- Eprouvettes pour essais de fatigue (ISO 3928:1999) Probekörper für die Ermü-dungsprüfung (ISO 3928:1999)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3928:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 3928:2006 (E)
Foreword
The text of ISO 3928:1999 has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 3928:2006 by Technical Committee CEN/SS M11 "Powder metallurgy", the
secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 3928:1999 has been approved by CEN as EN ISO 3928:2006 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 3928
Second edition
1999-11-01
Sintered metal materials, excluding
hardmetals — Fatigue test pieces
Matériaux métalliques frittés, à l'exclusion des métaux-durs — Éprouvettes
pour essais de fatigue
A
Reference number
ISO 3928:1999(E)
---------------------- Page: 4 ----------------------
ISO 3928:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3928 was prepared by Technical Committee ISO/TC 119, Powder metallurgy,
Subcommittee SC 3, Sampling and testing methods for sintered metal materials (excluding hardmetals).
This second edition cancels and replaces the first edition (ISO 3928:1977) which has been technically revised.
Annex A of this International Standard is for information only.
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD © ISO ISO 3928:1999(E)
Sintered metal materials, excluding hardmetals —
Fatigue test pieces
1 Scope
This International Standard specifies:
the die cavity dimensions used for making fatigue test pieces by pressing and sintering, together with certain
dimensions of the test piece obtained from such a die;
the dimensions of the test pieces machined from sintered and powder forged materials.
This International Standard is applicable to all sintered metals and alloys, excluding hardmetals.
2 Pressed and sintered test pieces for fatigue test by reverse bend and axial testing
2.1 General
The pressed and sintered piece may also be subjected to further treatment, such as sizing, polishing or heat
treatment. If such treatments are applied, they shall be stated in the test report. In a metallographically examined
cross section of a test piece, in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.