SIST EN ISO 3738-1:2010
(Main)Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
This part of ISO 3738 specifies the Rockwell hardness test (scale A) for hardmetals.
Hartmetalle - Rockwell-Härteprüfung (Skala A) - Teil 1: Prüfverfahren (ISO 3738-1:1982)
Dieser Teil von ISO 3738 legt die Rockwell-Härteprüfung (Skala A) für Hartmetalle fest.
Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie 1: Méthode d'essai (ISO 3738-1:1982)
La présente partie de l'ISO 3738 spécifie une méthode d'essai de dureté Rockwell (échelle A) pour les métaux-durs.
Trdine - Preskus trdote po Rockwellu (skala A) - 1. del: Preskusne metode (ISO 3738-1:1982)
Ta del ISO 3738 določa preskus trdote po Rockwelu (skala A) za trdine.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3738-1:2010
01-julij-2010
Trdine - Preskus trdote po Rockwellu (skala A) - 1. del: Preskusne metode (ISO
3738-1:1982)
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
Hartmetalle - Rockwell-Härteprüfung (Skala A) - Teil 1: Prüfverfahren (ISO 3738-1:1982)
Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie 1: Méthode d'essai (ISO
3738-1:1982)
Ta slovenski standard je istoveten z: EN ISO 3738-1:2010
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3738-1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3738-1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 3738-1:2010
EUROPEAN STANDARD
EN ISO 3738-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 77.040.10; 77.160
English Version
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test
method (ISO 3738-1:1982)
Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie Hartmetalle - Rockwell-Härteprüfung (Skala A) - Teil 1:
1: Méthode d'essai (ISO 3738-1:1982) Prüfverfahren (ISO 3738-1:1982)
This European Standard was approved by CEN on 16 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3738-1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3738-1:2010
EN ISO 3738-1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3738-1:2010
EN ISO 3738-1:2010 (E)
Foreword
The text of ISO 3738-1:1982 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 3738-1:2010.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3738-1:1982 has been approved by CEN as a EN ISO 3738-1:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3738-1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 3738-1:2010
International Standard
3738 / 1
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPI-AHM3A~Mfl l-l0 CTAH~APTl43A~klI4.ORGANlSATlON INTERNATIONALE DE NORMALlSATlON
Hardmetals - Rockwell hardness test (scale A) -
Part 1 : Test method
Mktaux-durs - Essai de duret6 Rockwell (behelle A) - Partie 7 : Mdthode d’essai
First edition - 1982-10-15
U DC 669.018.25 : 620.178.152.42
Ref. No. ISO 3738/1-1982 (E)
Descriptors : powder metallurgy, hardmetals, tests, mechanical tests, hardness tests, Rockwell hardness.
Price based on 3 pages
---------------------- Page: 7 ----------------------
SIST EN ISO 3738-1:2010
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bodies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 37380 was developed by Technical Committee
ISO/TC 119, Powder metahrgy, and was circulated to the member bodies in
February 1982.
lt has been approved by the member bodies of the following countries :
Brazil
Ireland Spain
Bulgaria Italy Sweden
China Korea, Rep. of Switzerland
Czechoslovakia Mexico USA
Egypt, Arab Rep. of Poland USSR
France Romania
Germany, F. R. South
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Trdine - Preskus trdote po Rockwellu (skala A) - 1. del: Preskusne metode (ISO 3738-1:1982)Hartmetalle - Rockwell-Härteprüfung (Skala A) - Teil 1: Prüfverfahren (ISO 3738-1:1982)Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie 1: Méthode d'essai (ISO 3738-1:1982)Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)77.160Metalurgija prahovPowder metallurgy77.040.10Mehansko preskušanje kovinMechanical testing of metalsICS:Ta slovenski standard je istoveten z:FprEN ISO 3738-1kSIST FprEN ISO 3738-1:2010en,fr,de01-januar-2010kSIST FprEN ISO 3738-1:2010SLOVENSKI
STANDARD
kSIST FprEN ISO 3738-1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 3738-1
October 2009 ICS 77.160; 77.040.10 English Version
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
Métaux-durs - Essai de dureté Rockwell (échelle A) -Partie 1: Méthode d'essai (ISO 3738-1:1982)
Hartmetalle - Rockwell-Härteprüfung (Skala A) - Teil 1: Prüfverfahren (ISO 3738-1:1982) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/SS M11.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 3738-1:2009: EkSIST FprEN ISO 3738-1:2010
FprEN ISO 3738-1:2009 (E) 2 Contents Page Foreword .3 kSIST FprEN ISO 3738-1:2010
FprEN ISO 3738-1:2009 (E) 3 Foreword The text of ISO 3738-1:1982 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 3738-1:2009. This document is currently submitted to the Unique Acceptance Procedure. Endorsement notice The text of ISO 3738-1:1982 has been approved by CEN as a FprEN ISO 3738-1:2009 without any modification.
kSIST FprEN ISO 3738-1:2010
kSIST FprEN ISO 3738-1:2010
International Standard 3738 / 1 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPI-AHM3A~Mfl l-l0 CTAH~APTl43A~klI4.ORGANlSATlON INTERNATIONALE DE NORMALlSATlON Hardmetals - Rockwell hardness test (scale A) - Part 1 : Test method Mktaux-durs - Essai de duret6 Rockwell (behelle A) - Partie 7 : Mdthode d’essai First edition - 1982-10-15 U DC 669.018.25 : 620.178.152.42 Ref. No. ISO 3738/1-1982 (E) Descriptors : powder metallurgy, hardmetals, tests, mechanical tests, hardness tests, Rockwell hardness. Price based on 3 pages kSIST FprEN ISO 3738-1:2010
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO member bodies). The work of developing Inter- national Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 37380 was developed by Technical Committee ISO/TC 119, Powder metahrgy, and was circulated to the member bodies in February 1982. lt has been approved by the member bodies of the following countries : Brazil Ireland Bulgaria Italy China Korea, Rep. of Czechoslovakia Mexico Egypt, Arab Rep. of Poland France Romania Germany, F. R. South Africa, Rep. of Spain Sweden Switzerland USA USSR The member body of the following country expressed disapproval of the document on technical grounds : United Kingdom This International Standard cancels and replaces International Standard ISO 3738-1976 of which it constitutes a technical revision. 0 International Organkation for Standardkation, 1982 Printed in Switzerland kSIST FprEN ISO 3738-1:2010
INTERNATIONAL STANDARD ISO 3738/1-1982 (EI Hardmetals
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.