iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1854:1997

(Main)

Pressure sensing devices for gas burners and gas burning appliances

Pressure sensing devices for gas burners and gas burning appliances

This European Standard specifies requirements and test methods for pressure sensing devices (referred to as psds) for the control of combustible gases of the first, second and third families, air, combustion products and mixtures there of for pressures up to 4 bar. It covers all types of psd including electronic, differential and inferential types.  The requirements for 'S' class psd are intended to meet the requirements for increased reliability for steam boilers.  The methods of test given in this standard are intended for product type testing. Tests intended for production testing are not specifically included.

Druckwächter für Gasbrenner und Gasgeräte

Diese Europäische Norm legt Anforderungen und Prüfverfahren an Druckwächter fest, welche bei Drücken bis 4 bar eingesetzt werden, um brennbare Gase der ersten, zweiten und dritten Gasfamilie, Luft, Verbrennungsprodukte und Gemischen davon, zu überwachen. Sie gilt für alle Arten von Druckwächtern einschließlich elektronischer Ausführungen sowie für Differenzdruckwächter und ähnliche Arten. Die Anforderungen an Druckwächter der Klasse "S" sind dafür vorgesehen, die erhöhten Anforderungen an die Zuverlässigkeit ("Besondere Bauart") zum Einsatz an Dampfkesseln zu erfüllen.

Dispositifs de surveillance de pression pour bruleurs a gaz et appareils a gaz

La présente norme européenne précise les spécifications de fonctionnement et les méthodes d'essai des dispositifs de surveillance de la pression des combustibles, des premiere, seconde et troisieme familles, d'air, de gaz produits par la combustion et autres mélanges gazeux jusqu'a des pressions de 4 bar (dispositifs dénommés ci-apres "pressostats"). Elle s'applique a tous les types de pressostats y compris électroniques, différentiels et inférentiels. Les exigences pour les pressostats de classe 'S' tendent a répondre aux exigences de fiabilité accrue pour les chaudieres a vapeur.

Tlačna zaznavala za plinske gorilnike in plinske aparate

General Information

Status
Withdrawn
Publication Date
31-Oct-1997
Withdrawal Date
31-Aug-2006
ICS
23.060.40 - Pressure regulators
27.060.20 - Gas fuel burners
Technical Committee
PLN - Gas appliances for domestic use
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2006
Due Date
01-Sep-2006
Completion Date
01-Sep-2006
Directive
90/396/EEC - Appliances burning gaseous fuels
Mandate
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
EN 1854:1997 - Pressure sensing devices for gas burners and gas burning appliances

Relations

Amended By
SIST EN 1854:1997/A1:1999 - Pressure sensing devices for gas burners and gas burning appliances
Effective Date
01-Dec-1999
Replaced By
SIST EN 1854:2006 - Pressure sensing devices for gas burners and gas burning appliances
Effective Date
01-Sep-2006

Buy Standard

EN 1854:1997EN 1854:1997
PreviousNext
Standard
EN 1854:1997
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Druckwächter für Gasbrenner und GasgeräteDispositifs de surveillance de pression pour bruleurs a gaz et appareils a gazPressure sensing devices for gas burners and gas burning appliances27.060.20Plinski gorilnikiGas fuel burners23.060.40Pressure regulatorsICS:Ta slovenski standard je istoveten z:EN 1854:1997SIST EN 1854:1997en01-november-1997SIST EN 1854:1997SLOVENSKI
STANDARD



SIST EN 1854:1997



SIST EN 1854:1997



SIST EN 1854:1997



SIST EN 1854:1997



SIST EN 1854:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1854:2023(Main)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels — Pressure sensing devices for gas burners and gas burning appliances
EN 1854:2022

This European Standard specifies the safety, design, construction, and performance requirements and testing of pressure sensing devices for burners and appliances burning one or more gaseous fuels.
It applies to pressure sensing devices for the measurement of pressures of gases according to EN 437 or air or combustion products for maximum inlet pressures up to 500 kPa (5 bar).
It applies to all types of pressure sensing devices, including electronic, differential and inferential types.
It also specifies requirements for pressure sensing devices which are intended to be applied to steam boilers and as such need to meet increased reliability requirements. These devices are classified as PSD-S in this European Standard.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12067-2:2023(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic types
EN 12067-2:2022

This European Standard specifies the safety, construction and performance requirements for electronic fuel/air ratio control system (ERC), electronic fuel/air ratio supervision system (ERS) and electronic fuel/air ratio trim system (ERT) intended for use with burners and appliances burning gaseous or liquid fuels. It also describes the test procedures for evaluating these requirements and specifies information necessary for installation and use.
This European Standard is applicable to
— closed loop fuel/air ratio control systems, see 3.101;
— fuel/air ratio supervision systems, see 3.102;
— closed loop fuel/air ratio trim systems, see 3.103;
and does not differentiate into classification by heat input.
NOTE 1 European Standards for burners, appliances or processes which use ERC, ERS or ERT can override the requirements of this standard.
NOTE 2 Provisions for production control are not part of this European Standard.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16304:2022(Main)
Automatic vent valves for gas burners and gas burning appliances
EN 16304:2022

This European Standard specifies the safety, construction and performance requirements for automatic vent valves for use with gas burners, gas appliances and similar use, hereafter referred to as ‘valves’.
This European Standard is applicable to:
-   valves with declared maximum inlet pressures up to and including 500 kPa (5 bar) of nominal connection sizes up to and including DN 100 for use with one or more fuel gases in accordance with EN 437:2003+A1:2009;
-   electrically operated valves;
-   valves actuated by fluids where the control valves for these fluids are actuated electrically, but not to any external electrical devices for switching the control signal or actuating energy;
-   valves fitted with open position indicator switches.
NOTE   Provisions for final product inspection and testing by the manufacturer are not specified.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16678:2022(Main)
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 16678:2022

This European Standard specifies the safety, design, construction and performance requirements and testing for automatic shut-off
valves with or without modulating control functions (hereafter referred to as ‘valves’) for burners and appliances burning one or more
gaseous fuels according to EN 437:2003+A1:2009.
This European Standard is applicable to valves with declared maximum inlet pressures of more than 500 kPa (5 bar) and up to and including 6 300 kPa (63 bar).
This European Standard is applicable to
— electrically operated valves and to valves actuated by fluids including the pilot valves for these fluids if actuated electrically and
including release valves, but not to any external electrical devices for switching the actuating energy;
— automatic shut-off valves where the flow rate is controlled by external electrical signals proportional to the applied signal.
This European Standard is not applicable to valves specifically designed for use in transmission and distribution networks.
NOTE Provisions for final product inspection and testing by the manufacturer are not specified.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 88-1:2022(Main)
Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
EN 88-1:2022

This European Standard specifies the safety, construction and performance requirements for pressure regulators and pneumatic gas/air ratio pressure regulators (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator), intended for use with gas burners, gas appliances and similar use, hereafter referred to as ‘pressure regulators’.
This European Standard is applicable to
-   pressure regulators with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 250 for use with one or more fuel gases in accordance with EN 437,
-   pressure regulators which use auxiliary energy,
-   pneumatic gas/air ratio pressure regulators, which function by controlling a gas outlet pressure in response to an air signal pressure, air signal differential pressure, and/or to a furnace pressure signal (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator),
-   gas/air ratio pressure regulators which change an air outlet pressure in response to a gas signal pressure or a gas signal differential pressure.
This European Standard does not cover
-   pressure regulators connected directly to gas distribution network or to a container that maintains a standard distribution pressure,
-   pressure regulators intended for gas appliances to be installed in the open air and exposed to the environment,
-   mechanically linked gas/air ratio controls,
-   electronic gas/air ratio controls (EN 12067-2).

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1106:2022(Main)
Manually operated taps for gas burning appliances
EN 1106:2022

This European Standard specifies the safety, construction and performance requirements for manually operated taps and pre-setting taps intended for use with gas appliances and similar use, hereafter referred to as "taps".
This European Standard is applicable to taps with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 50 for use with one or more fuel gases in accordance with EN 437.
This European Standard does not apply to manual operated shut-off valves conforming to EN 331.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 88-3:2022(Main)
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
EN 88-3:2022

This European Standard specifies the safety, design, construction, and performance requirements and testing of electronic pressure
and/or flow rate regulators (hereafter referred to as ‘regulators’) for burners and appliances burning one or more gaseous fuels. This European Standard is applicable to regulators with declared maximum inlet pressure up to and including 500 kPa and of nominal connection sizes up to and including DN 250.
This European Standard is applicable to
 regulators which use auxiliary energy,
 regulators, which function by controlling a gas outlet pressure or a gas flow rate,
 regulators with a modular structure specified as a unit,
 regulators intended for gas appliances to be installed indoor or in the open air and exposed to the environment.
This European Standard does not  cover regulators connected directly to a gas distribution network or to a container that maintains a standard distribution pressure.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 88-2:2022(Main)
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
EN 88-2:2022

This European Standard specifies the safety, construction and performance requirements for pressure regulators (hereafter referred to as regulators) intended for use with gas burners and gas-burning appliances using fuel gases of the 1st, 2nd and 3rd families. This European Standard covers type testing only. It also provides additional information for the purchaser and user.
This European Standard is applicable to regulators that may be tested independently of gas burners and gas-burning appliances, which have a declared working pressure from above 500 mbar up to and including 5 bar.
This European Standard is also applicable to regulators incorporating safety devices.
NOTE 1   For safety accessories and pressure accessories, the requirements of EN 13611:2000, Annex F also apply.
NOTE 2   Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1.
Regulators intended to be used on pipe work installations for third family gases are also covered by EN 13785 and EN 13786.
This European Standard is not applicable to:
a)   pressure regulators that are connected directly to mains pipe-work or to a container that maintains a standard distribution pressure;
b)   pressure regulators which use electrical auxiliary energy.
pressure;
b)   pressure regulators which use electrical auxiliary energy.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13611:2019/AC:2022(Corrigendum)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2019/AC:2021

2021-02-23 and 2021-08- TC origine - corrects crosses in Table E.1, 2nd and 3rd columns, row "Transformers:" and Formula (J.9)

  • Corrigendum
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13611:2019(Main)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2019

This European Standard specifies the general safety, design, construction, and performance requirements and testing for safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard is applicable to controls with declared maximum inlet pressure up to and including 500 kPa of nominal connection sizes up to and including DN 250.
This European standard specifies general product requirements for the following controls:
-   automatic shut-off valves;
-   automatic burner control systems;
-   flame supervision devices;
-   gas/air ratio controls;
-   pressure regulators;
-   manual taps;
-   mechanical thermostats;
-   multifunctional controls;
-   pressure sensing devices;
-   valve proving systems;
-   automatic vent valves.
This European standard applies for control functions that are not covered by a specific control standard for burners and appliances burning one or more gaseous fuels or liquid fuels.
This European Standard applies also for safety accessories and pressure accessories with a product of the maximum allowable pressure PS and the volume V of less than 600 000 kPa • dm3 (6 000 bar• litres) or with a product of PS and DN of less than 300 000 kPa (3 000 bar) .
This European Standard applies for AC and DC supplied controls (for controls supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks controls see Annex I).
This European Standard is applicable to reset functions used for reset from lockout, e.g. due to ignition failure or temperature cut-out in burners and appliances (see Annex M).
This European Standard establishes methodologies for the determination of a Safety Integrity Level (SIL) and the determination of a Performance Level (PL) (see Annex J, Annex K and Annex L).
This European Standard gives guidelines for environmental aspects (see Annex N).
This European Standard does not apply to mechanical controls for use with liquid fuels.
Protection against environmental impact in open air (i.e. capable of withstanding UV radiation, wind, rain, snow, dirt deposits, condensation, ice and hoar frost (see IEV 441-11-05:2005)), earth quake, external fire are not covered by this standard.
This European Standard should be used in conjunction with the specific control standard (see Bibliography).

  • Standard
    153 pages
    English language
    sale 10% off
    e-Library read for
    1 day