SIST EN 60034-1:2003/A11:2003

Rotating electrical machines -- Part 1: Rating and performance

Superseded by EN 60034-1:2004

Drehende elektrische Maschinen -- Teil 1: Bemessung und Betriebsverhalten

Machines électriques tournantes -- Partie 1: Caractéristiques assignées et caractéristiques de fonctionnement

Rotating electrical machines - Part 1: Rating and performance - Amendment A11

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2003
• Withdrawal Date: 08-Jan-2009
• ICS: 29.160.01 - Rotating machinery in general
• Technical Committee: ERS - Rotating machinery
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Jan-2009
• Due Date: 30-Jan-2009
• Completion Date: 09-Jan-2009
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Ref Project: EN 60034-1:1998/A11:2002 - Rotating electrical machines - Part 1: Rating and performance

Relations

• Amends: SIST EN 60034-1:2003 - Rotating electrical machines -- Part 1: Rating and performance
• Effective Date: 21-Sep-2010
• Replaced By: SIST EN 60034-1:2005 - Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:2004)
• Effective Date: 01-Mar-2009
• Amends: SIST EN 60034-1:2003 - Rotating electrical machines -- Part 1: Rating and performance
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60034-1:2003 - Rotating electrical machines -- Part 1: Rating and performance
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-1:2003/A11:2003
01-december-2003
Rotating electrical machines - Part 1: Rating and performance - Amendment A11
Rotating electrical machines -- Part 1: Rating and performance
Drehende elektrische Maschinen -- Teil 1: Bemessung und Betriebsverhalten
Machines électriques tournantes -- Partie 1: Caractéristiques assignées et
caractéristiques de fonctionnement
Ta slovenski standard je istoveten z: EN 60034-1:1998/A11:2002
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-1:2003/A11:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60034-1:2003/A11:2003

---------------------- Page: 2 ----------------------

SIST EN 60034-1:2003/A11:2003
EUROPEAN STANDARD EN 60034-1/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 29.160.01
English version
Rotating electrical machines
Part 1: Rating and performance
Machines électriques tournantes Drehende elektrische Maschinen
Partie 1: Caractéristiques assignées Teil 1: Bemessung und Betriebsverhalten
et caractéristiques de fonctionnement
This amendment A11 modifies the European Standard EN 60034-1:1998; it was approved by CENELEC
on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-1:1998/A11:2002 E

---------------------- Page: 3 ----------------------

SIST EN 60034-1:2003/A11:2003
EN 60034-1:1998/A11:2002 - 2 -
Foreword
This amendment was prepared by the Technical Committee CENELEC TC 2, Rotating machinery.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A11 to EN 60034-1:1998 on 2002-07-01.
The following dates were fixed:
- latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-07-01
- latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2005-07-01
__________

---------------------- Page: 4 ----------------------

SIST EN 60034-1:2003/A11:2003
- 3 - EN 60034-1:1998/A11:2002
Replace section 12 by:
Section 12: Electromagnetic compatibility (EMC)
12.1 General
The following requirements apply to rotating electrical machines with rated voltages not exceeding
1 000 V a.c. or 1 500 V d.c. and which are intended for operation in industrial environments.
Electronic components mounted inside a rotating electrical machine and which are essential for its
operation (for example rotating excitation devices) are part of the machine.
Requir
...