SIST EN 61274-1-1:2007

Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification

This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61274-1 (QC 910000). It includes: - a blank worksheet with instructions for preparing detail specifications.

Kupplungen für Lichtwellenleiter-Steckverbinder - Teil 1-1: Vordruck für Bauartspezifikation

Raccords de connecteurs de fibres optiques -- Partie 1-1: Spécification particulière cadre

Cette spécification particulière cadre n'est pas, en soi, une spécification. Elle fait partie de la spécification générique CEI 61274-1 (QC 910000). Elle comprend: un modèle cadre avec les instructions pour préparer les spécifications particulières.

Prilagodilni členi (adapterji) za optične konektorje – 1-1. del: Okvirna podrobna specifikacija (IEC 61274-1-1:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2007
• Withdrawal Date: 14-Feb-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Feb-2012
• Due Date: 09-Mar-2012
• Completion Date: 15-Feb-2012
• Ref Project: EN 61274-1-1:2006 - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification

Relations

• Replaces: SIST EN 61274-1-1:1997 - Fibre optic adaptors -- Part 1-1: Blank detail specification
• Effective Date: 01-Sep-2007
• Revised: SIST EN 61274-1-1:2012 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification (IEC 61274-1-1:2011)
• Effective Date: 25-Dec-2012
• Revised: SIST EN 61274-1-1:1997 - Fibre optic adaptors -- Part 1-1: Blank detail specification
• Effective Date: 13-May-2010
• Replaced By: SIST EN 61274-1-1:2012 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification (IEC 61274-1-1:2011)
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 61274-1-1:1997 - Fibre optic adaptors -- Part 1-1: Blank detail specification
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 61274-1-1:1997 - Fibre optic adaptors -- Part 1-1: Blank detail specification
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61274-1-1:2007
01-september-2007
1DGRPHãþD
SIST EN 61274-1-1:1997
3ULODJRGLOQLþOHQLDGDSWHUML]DRSWLþQHNRQHNWRUMH±GHO2NYLUQDSRGUREQD
VSHFLILNDFLMD,(&
Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification (IEC 61274-1-
1:2006)
Kupplungen für Lichtwellenleiter-Steckverbinder - Teil 1-1: Vordruck für
Bauartspezifikation (IEC 61274-1-1:2006)
Raccords de connecteurs de fibres optiques -- Partie 1-1: Spécification particuliere cadre
(IEC 61274-1-1:2006)
Ta slovenski standard je istoveten z: EN 61274-1-1:2006
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61274-1-1:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61274-1-1

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61274-1-1:1997


English version


Adaptors for fibre optic connectors
Part 1-1: Blank detail specification
(IEC 61274-1-1:2006)


Raccords de connecteurs  Kupplungen für Lichtwellenleiter-
de fibres optiques Steckverbinder
Partie 1-1: Spécification particulière cadre Teil 1-1: Vordruck für Bauartspezifikation
(CEI 61274-1-1:2006) (IEC 61274-1-1:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61274-1-1:2006 E

---------------------- Page: 2 ----------------------

EN 61274-1-1:2006 - 2 -
Foreword
The text of document 86B/2344/FDIS, future edition 2 of IEC 61274-1-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61274-1-1 on 2006-10-01.
This European Standard supersedes EN 61274-1-1:1997.
Specific technical changes from EN 61274-1-1:1997 include increased detail in the work sheet formats,
for example applicable fibre/cable information has been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
__________
Endorsement notice
The text of the International Standard IEC 61274-1-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61274-1-1
INTERNATIONAL


QC 860001
STANDARD


Deuxième édition
Second edition

2006-09

Raccords de connecteurs de fibres optiques –
Partie 1-1:
Spécification particulière cadre

Adaptors for fibre optic connectors –
Part 1-1:
Blank detail specification
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

61274-1-1  IEC:2006 – 3 –
CONTENTS

FOREWORD.5

1 Scope.9
2 Qualification approval .9
2.1 Procedure.9
2.2 Test schedule and performance requirements.9
3 Quality conformance inspection .9
3.1 Lot-by-lot inspection .9
3.2 Periodic inspection .9
4 Detail specification worksheet .9

---------------------- Page: 5 ----------------------

61274-1-1  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

ADAPTORS FOR FIBRE OPTIC CONNECTORS –

Part 1-1: Blank detail specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61274-1-1 had been prepared by subcommittee 86B. Fibre optic
interconnecting devices and passive components of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition of IEC 61274-1-1 published in 1994
and constitutes a technical revision. Specific technical changes since the first edition include
increased detail in the work sheet formats, for example applicable fibre/cable information has
been added.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2344/FDIS 86B/2391/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 6 ----------------------

61274-1-1  IEC:2006 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC numbers that appear on the front cover of this publication are the specification
numbers in the IEC Quality Assessment System for Electronic Components (IECQ)
IEC 61274 consists of the following parts, under the general title Adaptors for fibre optic
connectors
Part 1: Generic specification
Part 1-1: Blank detail specification
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 7 ----------------------

61274-1-1  IEC:2006 – 9 –
ADAPTORS FOR FIBRE OPTIC CONNECTORS –

Part 1-1: Blank detail specification



1 Scope
This blank detail specification is not, by itself, a specification. It is part of the generic
specification IEC 61274-1 (QC 910000). It includes:
– a blank worksheet with instruc
...