SIST ETS 300 133-6 E1:2003

• Abstract:

  General requirements Base station model Transmitter requirements Synchronization requirements Base station network functions

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.20 - Paging systems
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 133-6 ed.1 (1992-07) - Paging Systems (PS); Enhanced Radio MEssage System (ERMES); Part 6: Base station conformance specification

Overview

SIST ETS 300 133-6 E1:2003 sets forth the requirements for base stations in the European Radio Message System (ERMES) as part of the broader suite of Paging Systems (PS) standards. Developed by the Slovenski inštitut za standardizacijo (SIST) and technically aligned with ETSI standards, this document provides specifications for conformance, ensuring interoperability, reliability, and performance for base stations used within ERMES networks throughout Europe.

This standard is essential for manufacturers, operators, and regulators involved in deploying, managing, or certifying ERMES base stations, as it defines radio frequency (RF) characteristics, synchronization requirements, transmitter operations, and network integration capabilities.

Keywords: Paging systems, ERMES, base station conformance, transmitter requirements, synchronization, RF characteristics, SIST, ETSI, European standard.

Key Topics

• General Requirements: Specifies the functional and operational characteristics for base stations, describing necessary components such as transmitters, control, and timing equipment.
• Base Station Model: Details definitions and configurations for base stations, including transmitter operation on designated ERMES channels and integration with network controllers.
• Transmitter Requirements: Covers RF requirements such as frequency tolerances, modulation methods, symbol rate, and spectrum masks. Ensures transmitters meet strict criteria for performance and signal integrity.
• Synchronization Requirements: Specifies timing, sequencing, and synchronization protocols vital for robust operation in ERMES networks, including handling batch transmissions and channel assignments.
• Base Station Network Functions: Defines the interactions between base stations and higher-level network components like the Paging Area Controller (PAC), ensuring smooth data, control, and maintenance communications through standardized interfaces.

Applications

The standard serves numerous practical purposes in the telecommunications sector:

• Base Station Development: Acts as a technical reference for manufacturers designing and certifying ERMES-compliant base stations, helping to assure compatibility and marketability within European paging systems.
• Network Deployment: Provides guidelines for installation and integration of base stations into public or private paging networks, streamlining network expansion and maintenance.
• Regulatory Compliance: Bolsters conformance assessment processes, aiding network operators and certification bodies to verify that installations meet relevant European requirements.
• Operational Optimization: Supports service providers by defining requirements that improve message delivery reliability, system synchronization, and network resilience in paging systems.
• Interoperability Assurance: Ensures that components from different vendors can work together, facilitating multi-vendor network implementation and future-proof system design.

Related Standards

This part is one of a suite of standards for ERMES Paging Systems. Relevant standards in the series and related technical documents include:

• SIST ETS 300 133-1: General aspects of Paging Systems (PS); ERMES
• SIST ETS 300 133-2: Service aspects for ERMES systems
• SIST ETS 300 133-3: Network aspects, including interface specifications
• SIST ETS 300 133-4: Air interface specification for ERMES networks
• SIST ETS 300 133-5: Receiver conformance specification
• SIST ETS 300 133-7: Operation and maintenance aspects
• I-ETS 300 113: General technical characteristics and test conditions for land mobile radio equipment

Summary

Compliance with SIST ETS 300 133-6 E1:2003 is critical for manufacturers and operators seeking to deploy ERMES base stations in Europe. By adhering to these standards, organizations ensure their equipment meets rigorous RF, synchronization, and interoperability requirements, supporting the robust operation of paging systems and facilitating reliable wireless message communication across diverse network environments.

SLOVENSKI STANDARD
01-december-2003
6LVWHPLRVHEQHJDNOLFD36¤±(YURSVNLVLVWHP]DUDGLMVNRVSRURþDQMH(50(6±
GHO6SHFLILNDFLMDVNODGQRVWL]DED]QHSRVWDMH
Paging Systems (PS); Enhanced Radio MEssage System (ERMES); Part 6: Base station
conformance specification
Ta slovenski standard je istoveten z: ETS 300 133-6 Edition 1
ICS:
33.070.20 Sistem za osebni klic Paging systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN ETS 300 133-6
TELECOMMUNICATION July 1992
STANDARD
Source: ETSI TC-PS Reference: DE/PS-2001-6
ICS: 33.080
ERMES, base station, conformance
Key words:
Paging systems (PS);
European Radio Message System (ERMES)
Part 6 : Base station conformance specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - [e-mail]
X.400: Internet:
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1992. All rights reserved.
New presentation - see History box

Page 2
ETS 300 133-6: July 1992
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

Page 3
ETS 300 133-6: July 1992
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.7
4 Abbreviations.8
5 Base station description .8
6 RF requirements .8
6.1 General .8
6.1.1 Extreme test conditions.8
6.2 Modulation .8
6.2.1 Symbol transition shaping .8
6.2.2 In-channel RF spectrum.9
6.3 Frequency tolerances .9
6.4 Symbol rate.9
7 Test methods .9
7.1 General .9
7.2 Modulation .9
7.2.1 Symbol transition shaping .9
7.2.2 RF spectrum.10
7.3 Frequency tolerances .10
7.3.1 Centre frequency.10
7.3.2 Symbol frequency.10
7.4 Symbol rate.10
History.11

Page 4
ETS 300 133-6: July 1992
Blank page
Page 5
ETS 300 133-6: July 1992
Foreword
This European Telecommunication Standard (ETS) has been produced by the Paging Systems (PS)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS comprises seven parts with the generic title "Paging systems (PS); European Radio Message
System (ERMES)". The title of each part is listed below:
- ETS 300 133-1: "Part 1: General aspects"
- ETS 300 133-2: "Part 2: Service aspects"
- ETS 300 133-3: "Part 3: Network aspects"
- ETS 300 133-4: "Part 4: Air interface specification"
- ETS 300 133-5: "Part 5: Receiver conformance specification"
- ETS 300 133-6: "Part 6: Base station conformance specification"
- ETS 300 133-7: "Part 7: Operation and maintenance aspects"
This part, ETS 300 133-6, gives the European Radio Message System (ERMES) base station
conformance specification and includes the technical characteristics of the transmitters.

Page 6
ETS 300 133-6: July 1992
Blank page
Page 7
ETS 300 133-6: July 1992
1 Scope
This part of the seven part European Telecommunication Standard (ETS) 300 133 defines the
requirements for base stations operating on the European Radio Message System (ERMES). A general
description of the base station is given and detailed Radio Frequency (RF) characteristics defined.
2 Normative references
This ETS incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references subsequent amendments to, or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 133-1: "Paging Systems (PS); European Radio Message System
(ERMES) Part 1: General aspects".
[2] ETS 300 133-2: "Paging Systems (PS); European Radio Message System
(ERMES) Part 2: Service aspects".
[3] ETS 300 133-3: "Paging Systems (PS); European Radio Message System
(ERMES) Part 3: Network aspects".
[4] ETS 300 133-4: "Paging
...