SIST EN 13860-3:2004
(Main)Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification
Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification
This European Standard identifies the functional characteristics of a general purpose eddy current system and provides methods for their measurement and verification.
The evaluation of these characteristics permits a well-defined description and comparability of an eddy current equipment.
By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application.
Where accessories are used, these should be characterised using the principles of this standard.
This standard does not give the extent of verification nor acceptance criteria for the characteristics. These are given in the application documents.
Zerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und deren Verifizierung - Teil 3: Kenngrößen des Systems und deren Verifizierung
Diese Europäische Norm legt die Funktionskennwerte von Wirbelstromprüfsystemen für die allgemeine Anwendung fest und enthält Verfahren für ihre Messung und Verifizierung.
Die Bewertung dieser Kennwerte erlaubt eine verständliche Beschreibung und Vergleichbarkeit von Wirbel-stromprüfeinrichtungen.
Mit einer sorgfältigen Auswahl der Kennwerte ist es möglich, ein angemessenes und effizientes Wirbelstrom-prüfsystem für einen besonderen Anwendungsfall aufzubauen.
Zusatzeinrichtungen sollten, sofern sie eingesetzt werden, nach den Grundlagen der vorliegenden Norm charakterisiert werden.
Diese Norm enthält weder Vorschriften für den Umfang der Verifizierung noch für die Annahmekriterien der Kennwerte. Diese werden in den Anwendungsdokumenten angegeben.
Essais non destructifs - Examen par courants de Foucault - Caractéristiques et vérification de l'appareillage - Partie 3: Caractéristiques du systeme et vérifications
Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verificationZerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und deren Verifizierung - Teil 3: Kenngrößen des Systems und deren VerifizierungEssais non destructifs - Examen par courants de Foucault - Caractéristiques et vérification de l'appareillage - Partie 3: Caractéristiques du systeme et vérificationsNon-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN 13860-3:2003SIST EN 13860-3:2004en01-junij-2004SIST EN 13860-3:2004SLOVENSKI
STANDARD
SIST EN 13860-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13860-3December 2003ICS 19.100English versionNon-destructive testing - Eddy current examination - Equipmentcharacteristics and verification - Part 3: System characteristicsand verificationEssais non destructifs - Examen par courants de Foucault -Caractéristiques et vérification de l'appareillage - Partie 3:Caractéristiques du système et vérificationsZerstörungsfreie Prüfung - Wirbelstromprüfung -Kenngrößen von Prüfeinrichtungen und deren Verifizierung- Teil 3: Kenngrößen des Systems und deren VerifizierungThis European Standard was approved by CEN on 7 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13860-3:2003 ESIST EN 13860-3:2004
EN 13860-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44System characteristics.44.1General characteristics.44.1.1Introduction.44.1.2Physical characteristics.44.1.3Calibration related characteristics.54.1.4Functional characteristics.54.2Accessories.55Verification.55.1General.55.2Levels of verification.55.3Verification procedure.65.4Corrective actions.66Implementation of the functional verification.7Bibliography.8SIST EN 13860-3:2004
EN 13860-3:2003 (E)3ForewordThis document (EN 13860-3:2003) has been prepared by Technical Committee CEN/TC 138 “Non-destructivetesting”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest byJune 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association.This document includes a Bibliography.EN 13860 comprises a series of European Standards for "Eddy current examination - Equipment" which is madeup of the following:EN 13860-1Non-destructive testing - Eddy current examination - Equipment characteristics and verification -Part 1: Instrument characteristics and verification.EN 13860-2Non-destructive testing - Eddy current examination - Equipment characteristics and verification -Part 2: Probe characteristics and verification.EN 13860-3Non-destructive testing - Eddy current examination - Equipment characteristics and verification -Part 3: System characteristics and verification.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13860-3:2004
EN 13860-3:2003 (E)41 ScopeThis European Standard identifies the functional characteristics of a general purpose eddy current system andprovides methods for their measurement and verification.The evaluation of these characteristics permits a well-defined description and comparability of an eddy currentequipment.By careful choice of the characteristics, a consistent and effective eddy current examination system can bedesigned for a specific application.Where accessories are used, these should be characterised
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.