SIST EN 62827-3:2018
(Main)Wireless Power Transfer - Management - Part 3: Multiple sources control management (IEC 62827-3:2016)
Wireless Power Transfer - Management - Part 3: Multiple sources control management (IEC 62827-3:2016)
This document specifies methods and procedures to form groups for a spatial wireless
power-transfer system. The group of spatial wireless power-transfer systems that include
multiple power sources provides power transfer to receiving devices based on magnetic
resonance technology.
In order to achieve efficient power transfer to multiple receiving devices, this document also
specifies methods and procedures to set, share, and control the conditions of power transfer
between multiple power sources and receiving devices.
NOTE Expected power-receiving devices are audio, video and multimedia equipment.
Drahtlose Energieübertragung - Management - Teil 3: Mehrfachquellen Steuerungsmanagement (IEC 62827-3:2016)
Transfert de puissance sans fil - Gestion - Partie 3: Gestion du contrôle de sources multiples (IEC 62827-3:2016)
L'IEC 62827-3:2016 spécifie les méthodes et procédures de formation de groupes pour un système de transfert de puissance sans fil spatial. Le groupe du système de transfert de puissance sans fil spatial qui contient de multiples sources de puissance assure le transfert de puissance vers des dispositifs de réception au moyen de la technologie par résonance magnétique.
Afin d’obtenir un transfert de puissance efficace vers plusieurs dispositifs de réception, le présent document spécifie également les méthodes et procédures pour régler, partager et contrôler les conditions du transfert de puissance entre plusieurs sources de puissance et dispositifs de réception.
Brezžični prenos moči - Upravljanje - 3. del: Več virov kontrolnega upravljanja (IEC 62827-3:2016)
Ta dokument določa metode in postopke za oblikovanje skupin za prostorski sistem brezžičnega prenosa moči. Skupina prostorskih sistemov brezžičnega prenosa moči, ki vključujejo več virov energije, zagotavlja prenos moči sprejemnim napravam na podlagi tehnologije magnetne resonance.
Za zagotavljanje učinkovitega prenosa moči več sprejemnim napravam ta dokument določa tudi metode in postopke za nastavitev, skupno rabo in nadzor pogojev prenosa moči med več viri napajanja in sprejemnimi napravami.
OPOMBA: Pričakovane naprave za sprejem moči so avdio, video in večpredstavnostna oprema.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Drahtlose Energieübertragung - Management - Teil 3: Mehrfachquellen Steuerungsmanagement (IEC 62827-3:2016)Transfert de puissance sans fil - Gestion - Partie 3: Gestion du contrôle de sources multiples (IEC 62827-3:2016)Wireless Power Transfer - Management - Part 3: Multiple sources control management (IEC 62827-3:2016)35.240.99IT applications in other fields29.240.99Other equipment related to power transmission and distribution networksICS:Ta slovenski standard je istoveten z:EN 62827-3:2017SIST EN 62827-3:2018en,fr,de01-februar-2018SIST EN 62827-3:2018SLOVENSKI
STANDARD
SIST EN 62827-3:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62827-3
March 2017 ICS 43.120
English Version
Wireless power transfer - Management -
Part 3: Multiple source control management (IEC 62827-3:2016)
Transfert de puissance sans fil - Gestion -
Partie 3: Gestion du contrôle de sources multiples (IEC 62827-3:2016)
Drahtlose Energieübertragung - Management -
Teil 3: Mehrfachquellen Steuerungsmanagement (IEC 62827-3:2016) This European Standard was approved by CENELEC on 2017-01-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62827-3:2017 E SIST EN 62827-3:2018
EN 62827-3:2017 2 European foreword The text of document 100/2604/CDV, future edition 1 of IEC 62827-3, prepared by Technical Area 15 "Wireless power transfer" of IEC/TC 100 "Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62827-3:2017.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-18 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-01-18
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62827-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62827-2 NOTE Harmonized as EN 62827-2 1.
1 At draft stage. SIST EN 62827-3:2018
EN 62827-3:2017 3 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu
Publication Year Title EN/HD Year
IEC 62827-1 -
Wireless power transfer - Management - Part 1: Common components EN 62827-1 -
SIST EN 62827-3:2018
SIST EN 62827-3:2018
IEC 62827-3 Edition 1.0 2016-12 INTERNATIONAL STANDARD
Wireless power transfer – Management –
Part 3: Multiple source control management
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 43.120
ISBN 978-2-8322-3683-3
® Registered trademark of the International Electrotechnical Commission ®
Warning! Make sure that you obtained this publication from an authorized distributor. SIST EN 62827-3:2018 colourinside
– 2 – IEC 62827-3:2016 © IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 7 3.1 Terms and definitions . 7 3.2 Abbreviated terms . 9 4 Basic overview of WPMS . 9 5 Requirements in WPMSs . 11 5.1 General model for WPMSs . 11 5.2 Required functionalities. 11 5.2.1 General . 11 5.2.2 Consideration for mismatch of receiving power and required power . 13 5.2.3 Wireless power distribution . 13 5.3 Message type by WPMS-S . 13 6 Control and management method on WPMS . 14 6.1 Formation of WPMS-S group . 14 6.2 Preparation of wireless power transfer for multiple WPMS-Ds . 15 6.2.1 WPMS-D identification and authentication . 15 6.2.2 Reception of power transfer information of WPMS-Ds . 15 6.2.3 Detection of WPMS-D positions . 16 6.2.4 Setting of the WPMS-S power transmitting condition . 16 6.3 Wireless power transfer mode . 18 6.3.1 General . 18 6.3.2 Wireless power distribution . 18 6.3.3 Synchronizing method of magnetic fields in WPMS . 18 6.4 Reconfiguration of WPMS . 19 6.4.1 General . 19 6.4.2 Completion and resumption of wireless power transfer . 19 6.4.3 Appearance and disappearance of WPMS-D. 20 6.4.4 Appearance and disappearance of WPMS-S . 20 6.5 Power transfer to WPMS-D with a flat battery. 20 6.6 Termination of wireless power transfer . 20 Bibliography . 21
Figure 1 – Conceptual image of WPMS: Example 1 . 9 Figure 2 – Conceptual image of WPMS: Example 2 . 10 Figure 3 – Conceptual image of WPMS: Example 3 . 10 Figure 4 – Structure of a WPMS . 11 Figure 5 – Overall procedure of WPMSs . 12 Figure 6 – Reception of power transfer information of WPMS-Ds . 15 Figure 7 – Completion and resumption of wireless power transfer . 19
Table 1 – Message type . 14 Table 2 – Notices of WPMS-S . 15 SIST EN 62827-3:2018
IEC 62827-3:2016 © IEC 2016 – 3 –
Table 3 – Configuration on mutual work areas . 16 Table 4 – Find WPMS-D . 16 Table 5 – Request for sending power information . 17 Table 6 – Exchange manageable WPMS-D . 17 Table 7 – Notify power transfer setting . 17 Table 8 – Suspend power transfer . 20
SIST EN 62827-3:2018
– 4 – IEC 62827-3:2016 © IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION ______________
WIRELESS POWER TRANSFER –
MANAGEMENT –
Part 3: Multiple source control management
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62827-3 has been prepared by technical area 15: Wireless power transfer, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 100/2604/CDV 100/2724/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62827 series, published under the general title Wireless power transfer – Management, can be found on the IEC website. SIST EN 62827-3:2018
IEC 62827-3:2016 © IEC 2016 – 5 –
The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.
SIST EN 62827-3:2018
– 6 – IEC 62827-3:2016 © IEC 2016 INTRODUCTION Wireless power transfer technology transmits electric power from the power source to the power-consuming device without the use of wire. The most widely used technology is electromagnetic induction technology and magnetic resonance technology. The wireless power transfer system eliminates the need for the user to connect a power cable to the electrical outlet. Through electromagnetic induction technology, users place the power-receiving device within a short distance from the power source in order to charge a battery without removing it from its device.
In parallel to this, magnetic resonance technology for wireless power transfer systems is also being developed. Magnetic resonance technology gives a spatial effect to power transfer. A spatial effect on wireless power transfer enables multiple power sources to deliver electric power to multiple receiving devices at a distance in the same vicinity.
In order to efficiently manage and support the wireless power transfer in spatial space, multiple power sources need to communicate and coordinate with each other.
SIST EN 62827-3:2018
IEC 62827-3:2016 © IEC 2016 – 7 –
WIRELESS POWER TRANSFER –
MANAGEMENT –
Part 3: Multiple source control management
1 Scope This document specifies methods and procedures to form groups for a spatial wireless power-transfer system. The group of spatial wireless power-transfer systems that include multiple power sources provides power transfer to receiving devices based on magnetic resonance technology. In order to achieve efficient power transfer to multiple receiving devices, this document also specifies methods and procedures to set, share, and control the conditions of power transfer between multiple power sources and receiving devices. NOTE Expected power-receiving devices are audio, video and multimedia equipment. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62827-1, Wireless power transfer – Management – Part 1: Common components 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms given in IEC 62827-1, and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: • IEC Electropedia: available at http://www.electropedia.org • ISO Online browsing platform: available at http://www.iso.org/obp 3.1 Terms and definitions 3.1.1
magnetic resonance subset of electromagnetic induction methods utilizing non-radiative, near-field or mid-field resonance coupling between two electromagnetic resonators where the coupling coefficient between the primary or source coil and the secondary or receiving coil is low (k much less than 1) 3.1.2
spatial wireless power transfer concept of wireless power transfer between multiple sources and multiple receiving devices which are placed at a distance within a spatial space SIST EN 62827-3:2018
– 8 – IEC 62827-3:2016 © IEC 2016 Note 1 to entry: "Spatial" means that receiving devices will take various positions and postures, and will lead to variable transfer efficiency including almost zero per cent. This situation may occur when receiving devices are placed far apart from the power source and are freely rearranged. 3.1.3
spatial wireless power transfer system group implementing spatial wireless power transfer in which the power source can deliver power and data to the power-receiving device Note 1 to entry: In special cases, a spatial wireless power transfer system can consist of only a single power source and only a single power-receiving device. Note 2 to entry: Spatial wireless power transfer system includes the case in which a power source has the ability to access a power-receiving device through a relay from other power sources when the power source attempts to deliver data to the receiving device. In this document, "data" means control and management data for wireless power transfer. 3.1.4
wireless power management system-source network WPMS-SN group of power sources which can communicate with each other via a network connection, such as wired LAN, wireless LAN, Bluetooth and so on Note 1 to entry: As a special case, spatial wireless power transfer system-source network can consist of only a single source. 3.1.5
power transfer area area in which a power source can deliver power to power-receiving devices wirelessly 3.1.6
communication area area in which a power source can communicate with power-receiving devices via a network connection, such as wired LAN, wireless LAN, Bluetooth and so on 3.1.7
power transfer level power strength of a power source transfer to the receiving device 3.1.8
wireless power transmitting condition condition for transmitting power such as power strength and phase
3.1.9
wireless power receiving condition condition for receiving power such as the received power, the relative value for required power and the voltage after receiving the required power which are calculated on the power-receiving device which receives or has received power from the power source 3.1.10
wireless power transfer mode distinct methods of transferring power from sources to receiving devices 3.1.11
wireless power distribution effective power delivery based on power required by the receiving devices SIST EN 62827-3:2018
IEC 62827-3:2016 © IEC 2016 – 9 –
3.2 Abbreviated terms
WPMSn the n-th WPMS if n is specified WDCZn the n-th WDCZ if n is specified WPTZn the n-th WPTZ if n is specified WPMS-Sn the n-th WPMS-S if n is specified WPMS-SN wireless power management system-source network WPMS-SNn the n-th WPMS-SN if n is specified WPMS-Dn the n-th WPMS-D if n is specified 4 Basic overview of WPMS Wirelss power management system (WPMS) is a system to deliver power to WPMS-Ds within a spatial space on the basis of wireless power trans
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.