SIST EN 300 392-3-2 V1.2.1:2006
(Main)Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC)
- Abstract
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
• general design aspects (e.g. reference points, numbering and addressing, or protocol architecture);
• the system bearer and mobility management services, and the corresponding air interface protocols;
• the interworking between TETRA networks;
• the interworking of TETRA networks with other networks, via gateways;
• the peripheral equipment interface on the mobile station;
• the Line Station (LS) interface with TETRA networks;
• the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment;
• the supplementary services applicable to the basic TETRA tele- or bearer services.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts:
• ISI general design;
• Additional Network Feature - ISI Individual Call (ANF-ISIIC);
• Additional Network Feature - ISI Group Call (ANF-ISIGC);
• Additional Network Feature - ISI Short Data service (ANF-ISISD);
• Additional Network Feature - ISI Mobility Management (ANF-ISIMM);
• 8 kbit/s encoding of user information at the ISI.
The present document is the ANF-ISIIC sub-part.
ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1].
Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol.
NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
- Status
- Published
- Publication Date
- 31-Mar-2006
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Apr-2006
- Due Date
- 01-Apr-2006
- Completion Date
- 01-Apr-2006
SIST EN 300 392-3-2 V1.2.1:2006 is the Slovenian adoption of ETSI EN 300 392-3-2 V1.2.1 for Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D). It specifies the Additional Network Feature Individual Call (ANF-ISIIC) at the Inter-System Interface (ISI), including how a TETRA user in one Switching and Management Infrastructure (SwMI) sets up, maintains, restores, and clears an individual call to a user in another SwMI. The standard is written for TETRA network, SwMI, and gateway implementers who need the inter-network signalling rules for this call type.
What does SIST EN 300 392-3-2 V1.2.1:2006 specify?
SIST EN 300 392-3-2 V1.2.1:2006 specifies the TETRA V+D interworking feature ANF-ISIIC. It describes the user-visible service, the functional entities and information flows behind it, and the protocol details needed to carry the service over the ISI.
The document is organized as follows:
- Clause 1 - scope
- Clause 2 - references
- Clause 3 - definitions and abbreviations
- Clause 4 - ANF-ISIIC stage 1 specification
- Clause 5 - ANF-ISIIC stage 2 specification
- Clause 6 - ANF-ISIIC stage 3 specification
- Annexes A to C - informative material
| Annex | What it covers |
|---|---|
| A | Static description of the TETRA individual call bearer service using attributes |
| B | Definition of the ISI ROSE operation |
| C | Interactions of SS-CFU with ANF-ISIIC |
In practice, the scope is the interworking of individual calls between TETRA networks over the ISI, including call restoration after user migration and signalling transfer between SwMIs.
What are the key requirements of SIST EN 300 392-3-2 V1.2.1:2006?
SIST EN 300 392-3-2 V1.2.1:2006 defines how ANF-ISIIC behaves at call set-up, during an active call, and when a user migrates to another network. The most important requirements are in clauses 4 to 6, with additional cases and procedures in annexes and figures.
Call set-up, routing and restoration
Clause 4 describes the service from the user point of view. ANF-ISIIC sets up calls from a user registered in one TETRA network to a user registered in another network, and it also supports call restoration when a user migrates during an established call. This matters because the service must keep the call usable even when the called or calling user changes network location.
Clause 4 also allows setup modification, including a change between individual call and group call, where the invoked ANF changes accordingly. Call modification may affect the 8 kbit/s encoding of user information when the data rate changes, so implementations have to adapt the user-information encoding while keeping the ISI connection itself intact.
Clause 4 says that clearing the call on either side clears the invoked ANF-ISIIC, the ISI connection, and the other SwMI call control application. It also highlights loop avoidance, including trombone connections, which is important for keeping routing efficient and preventing the same traffic from being sent back through the network path it already used.
Stage 2 functional behavior
Clause 5 models ANF-ISIIC with functional entities (FEs) and information flows. The functional model includes originating, terminating, migration-handling, routeing, and information-provision functions, and it shows how the ANF relates to the basic call functional model. For implementers, this is the bridge between service behaviour and actual software or network functions.
Clause 5 also defines named information flows such as CALL RESTORE, CALL RESTORE PREPARE, MIGRATION, SETUP, TX-GRANTED, TX-INTERRUPT, and TX-CEASED. These flows matter because they are the exchange points that an implementation must support when a call is being established, modified, restored, or controlled for transmission.
Clause 5 includes examples for successful and unsuccessful call set-up, migration using forward switching or re-routeing, call restoration, and resource queuing and allocation. The resource case is important when the terminating side allocates radio traffic channels temporarily and the originating side has to wait or retry before the call can connect.
Stage 3 protocol rules and coding
Clause 6 turns the service into protocol requirements. Each SwMI has to meet the requirements for message segmentation/re-assembly and ROSE protocol support named in the referenced standards, and ANF-ISIIC uses ROSE Invoke APDUs carried in PSS1 facility information elements. In practice, this means TETRA-specific inter-system signalling is embedded in PSS1 messages rather than sent as a separate protocol.
Clause 6.3 defines the TETRA PDUs used on the ISI, including SETUP, PROGRESS, ALERTING, CONNECT, FACILITY, DISCONNECT, RELEASE, and resource-handling PDUs. It also defines a range of information elements used for routing, migration, call identity, party identity, priority, transmission control, and resource status. These fields are what an implementer has to encode and decode correctly for interworking to succeed.
Clause 6.5 covers signalling procedures for call establishment, maintenance, DTMF procedures, clearing, and call collisions. Clause 6.8 defines timer use, including a restoration timer for migration cases. That is the practical safeguard against a call staying in an intermediate state for too long.
Interactions with other services and gateways
Clause 4 and clause 6 both deal with interactions with other supplementary services such as SS-CFU, SS-CFB, SS-CAD, SS-BIC, SS-CW, SS-HOLD, SS-CCBS, SS-CCNR, SS-AoC, and others. This matters because an ANF-ISIIC implementation must respect forwarding, barring, dispatcher authorization, and priority behaviour at the same time as the inter-system call routing.
Clause 4.4 and clause 6.6 cover interworking with PSTN, ISDN, and PISN through gateways. The originating SwMI includes gateway and external number information in the SETUP PDU, and the gateway provides progress and connected information back to the TETRA side. This is the part of the document that supports external calls through a TETRA gateway rather than only TETRA-to-TETRA calls.
What terms does SIST EN 300 392-3-2 V1.2.1:2006 define?
SIST EN 300 392-3-2 V1.2.1:2006 uses a small set of core terms to describe the routing model and the call-control entities.
- ANF - Additional Network Feature, the staged service feature model used for TETRA interworking specifications.
- ISI - Inter-System Interface, the interface over which TETRA networks interwork with each other.
- SwMI - Switching and Management Infrastructure, the network-side control domain that routes and manages calls.
- CMCE - Circuit Mode Control Entities, the TETRA call control entities that this sub-part applies to.
- FE - Functional Entity, the stage 2 modelling unit used to describe how the service is implemented.
- home SwMI - the SwMI that owns the Individual TETRA Subscriber Identity (ITSI) through its Mobile Network Identity (MNI).
- forward switching - the routeing method that joins two connections through an intermediate SwMI to carry the call onward.
- loop connection - an ISI connection whose two ends are in the same SwMI, which the standard seeks to avoid in routing cases.
Who uses SIST EN 300 392-3-2 V1.2.1:2006?
SIST EN 300 392-3-2 V1.2.1:2006 is used by TETRA network operators, SwMI vendors, gateway designers, and integration teams responsible for inter-network call control. It is especially relevant to engineers implementing call routing, migration handling, supplementary service interactions, and PSS1/ROSE signalling across the ISI.
It also matters to test and validation teams, because the document contains the call-sequence examples, information flows, and coding rules needed to check interoperability between two SwMIs and between TETRA and external networks.
Which standards are used with SIST EN 300 392-3-2 V1.2.1:2006?
SIST EN 300 392-3-2 V1.2.1:2006 relies on several related standards and companion parts.
- ETSI EN 300 392-2 - provides the TETRA air interface and the individual-call procedures referenced throughout clause 4 and clause 6.
- ETSI EN 300 392-3-1 - gives the general ISI design and the ROSE protocol support used by ANF-ISIIC.
- ETSI EN 300 392-3-5 - covers ANF-ISIMM, which is relevant to migration and call-restoration behaviour.
- ISO/IEC 11572 - provides PSS1 message segmentation/re-assembly support and the timers used by the inter-exchange signalling.
- ISO/IEC 11574 - provides PISN basic call service description, functional capabilities, and information flows.
- ISO/IEC 11582 - provides the generic functional protocol for supplementary services and the inter-exchange signalling procedures used with facility information elements.
- ITU-T Recommendation I.460 - provides multiplexing and rate-adaptation support used when TETRA streams are carried in the described connection model.
Clause 6 also uses EN 300 172, EN 300 392-9, EN 300 392-12-4, and ETS 300 395-2 for specific fields and coding rules in the PDU and information-element definitions.
What does the SIST EN 300 392-3-2 V1.2.1:2006 document contain?
SIST EN 300 392-3-2 V1.2.1:2006 contains a staged specification of ANF-ISIIC rather than a short service summary. Clause 4 gives the stage 1 service description and includes an overall SDL in Figure 2; clause 5 gives the stage 2 functional model, example information-flow sequences, and the mapping of functional entities to physical equipment and SwMIs; clause 6 gives the stage 3 protocol rules, coding requirements, signalling procedures, and timer behaviour.
The document also contains a large set of tables for PDU contents and information-element coding, especially in clause 6.3.1 and 6.3.2. Those tables are the practical coding reference for implementers who have to build or validate signalling messages.
Annex A reformulates bearer-service attributes, Annex B defines the ISI ROSE operation, and Annex C walks through SS-CFU interaction cases. Together they provide the background needed for design, interoperability testing, and protocol implementation.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 392-3-2 V1.2.1:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC)". This standard covers: The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies: • general design aspects (e.g. reference points, numbering and addressing, or protocol architecture); • the system bearer and mobility management services, and the corresponding air interface protocols; • the interworking between TETRA networks; • the interworking of TETRA networks with other networks, via gateways; • the peripheral equipment interface on the mobile station; • the Line Station (LS) interface with TETRA networks; • the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment; • the supplementary services applicable to the basic TETRA tele- or bearer services. The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts: • ISI general design; • Additional Network Feature - ISI Individual Call (ANF-ISIIC); • Additional Network Feature - ISI Group Call (ANF-ISIGC); • Additional Network Feature - ISI Short Data service (ANF-ISISD); • Additional Network Feature - ISI Mobility Management (ANF-ISIMM); • 8 kbit/s encoding of user information at the ISI. The present document is the ANF-ISIIC sub-part. ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1]. Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol. NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies: • general design aspects (e.g. reference points, numbering and addressing, or protocol architecture); • the system bearer and mobility management services, and the corresponding air interface protocols; • the interworking between TETRA networks; • the interworking of TETRA networks with other networks, via gateways; • the peripheral equipment interface on the mobile station; • the Line Station (LS) interface with TETRA networks; • the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment; • the supplementary services applicable to the basic TETRA tele- or bearer services. The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts: • ISI general design; • Additional Network Feature - ISI Individual Call (ANF-ISIIC); • Additional Network Feature - ISI Group Call (ANF-ISIGC); • Additional Network Feature - ISI Short Data service (ANF-ISISD); • Additional Network Feature - ISI Mobility Management (ANF-ISIMM); • 8 kbit/s encoding of user information at the ISI. The present document is the ANF-ISIIC sub-part. ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1]. Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol. NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
SIST EN 300 392-3-2 V1.2.1:2006 is classified under the following ICS (International Classification for Standards) categories: 33.070.10 - Terrestrial Trunked Radio (TETRA). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 392-3-2 V1.2.1:2006 is associated with the following European legislation: Standardization Mandates: BC-T-344, T-172. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 392-3-2 V1.2.1:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2006
Prizemni snopovni radio (TETRA) - Govor in podatki (V+D) - 3. del: Medsebojno
delovanje na medsistemskem vmesniku (ISI) - 2. poddel: Dodatna omrežna
funkcija: posamezni klic (ANF-ISIIC)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the
Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-
ISIIC)
Ta slovenski standard je istoveten z: EN 300 392-3-2 Version 1.2.1
ICS:
33.070.10 Prizemni snopovni radio Terrestrial Trunked Radio
(TETRA) (TETRA)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
European Standard (Telecommunications series)
Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D);
Part 3: Interworking at the Inter-System Interface (ISI);
Sub-part 2: Additional Network Feature
Individual Call (ANF-ISIIC)
2 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
Reference
REN/TETRA-03086
Keywords
interworking, radio, TETRA, V+D
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
Contents
Intellectual Property Rights.8
Foreword.8
1 Scope.10
2 References.11
3 Definitions and abbreviations.12
3.1 Definitions.12
3.2 Abbreviations.12
4 ANF-ISIIC stage 1 specification .14
4.1 Description.14
4.1.1 General description.14
4.1.2 Qualifications on applicability to telecommunication services.14
4.2 Procedures.14
4.2.1 Provision/withdrawal.14
4.2.2 Normal procedures.14
4.2.2.1 Activation/deactivation/registration/interrogation.14
4.2.2.2 Invocation and operation.15
4.2.2.2.1 Call routeing.15
4.2.2.2.2 Control of call time-out timers .15
4.2.2.2.3 Transmission control.15
4.2.2.2.3a Setup modification.16
4.2.2.2.4 Call modification.16
4.2.2.2.5 Call restoration after migration.16
4.2.2.2.6 Call clearing.17
4.2.2.2.7 Interaction between ANF-ISIICs.17
4.2.2.2.8 Radio traffic channel resource queuing and allocation policies. .17
4.2.3 Exceptional procedures.18
4.2.3.1 Activation/deactivation/registration/interrogation.18
4.2.3.2 Invocation and operation.18
4.3 Interactions with other TETRA supplementary services and ANFs.18
4.3.1 Calling Line Identification Presentation (SS-CLIP) .18
4.3.2 Connected Line identification Presentation (SS-COLP).18
4.3.3 Calling/connected Line Identification Restriction (SS-CLIR).18
4.3.4 Call Report (SS-CR) .18
4.3.5 Talking Party Identification (SS-TPI).19
4.3.6 Call Forwarding Unconditional (SS-CFU) .19
4.3.7 Call Forwarding on Busy (SS-CFB) .20
4.3.8 Call Forwarding on No Reply (SS-CFNRy) .22
4.3.9 Call Forwarding on Not Reachable (SS-CFNRc) .22
4.3.10 List Search Call (SS-LSC).22
4.3.11 Call Authorized by Dispatcher (SS-CAD).23
4.3.12 Short Number Addressing (SS-SNA) .24
4.3.13 Area Selection (SS-AS) .24
4.3.14 Access Priority (SS-AP) .24
4.3.15 Priority Call (SS-PC) .24
4.3.16 Call Waiting (SS-CW).24
4.3.17 Call Hold (SS-HOLD) .24
4.3.18 Call Completion to Busy Subscriber (SS-CCBS) .25
4.3.19 Late Entry (SS-LE) .25
4.3.20 Transfer of Control (SS-TC).25
4.3.21 Pre-emptive Priority Call (SS-PPC).25
4.3.22 Include Call (SS-IC) .25
4.3.23 Advice of Charge (SS-AoC) .25
4.3.24 Barring of Outgoing Calls (SS-BOC) .26
4.3.25 Barring of Incoming Calls (SS-BIC) .26
ETSI
4 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
4.3.26 Discreet Listening (SS-DL) .26
4.3.27 Ambience Listening (SS-AL).27
4.3.28 Dynamic Group Number Assignment (SS-DGNA).27
4.3.29 Call Completion on No Reply (SS-CCNR) .27
4.3.30 Call Retention (SS-CRT).27
4.3.31 Additional Network Feature - Inter System Interface Group Call (ANF-ISIGC).27
4.3.32 Additional Network Feature - Inter System Interface Short Data Service (ANF-ISISD) .27
4.3.33 Additional Network Feature - Inter System Interface Mobility Management (ANF-ISIMM) .27
4.3.34 Additional Network Feature - Inter System Interface Supplementary service (ANF-ISISS) .27
4.4 Interworking considerations.28
4.5 Static description of ANF-ISIIC using attributes .29
4.6 Overall SDL.31
5 ANF-ISIIC stage 2 specification .36
5.1 Functional model.36
5.1.1 Functional model description.36
5.1.2 Description of functional entities.37
5.1.2.1 SwMI A individual call control application functional entity, FE1 .37
5.1.2.2 ISI individual call originating functional entity, FE2.38
5.1.2.3 ISI individual outgoing call route determining functional entity, FE3.38
5.1.2.4 ISI individual call migration handling functional entity, FE4.38
5.1.2.5 ISI information provision functional entity, FE5 .39
5.1.2.6 ISI individual call migrated called user routeing functional entity, FE6.39
5.1.2.7 ISI individual call terminating functional entity, FE7.39
5.1.2.8 Terminating SwMI call control functional entity, FE8 .40
5.1.3 Relationship of functional model to basic call functional model.40
5.2 Information flow.41
5.2.1 Examples of information flow sequences .41
5.2.1.1 Successful call set-up when the called user is registered in SwMI B and uses on/off hook
signalling.42
5.2.1.2 Successful call set-up when the called user is registered in SwMI B and uses direct set-up
signalling.44
5.2.1.3 ANF-ISIIC set-up to a called user having migrated from SwMI B, using forward switching .45
5.2.1.4 ANF-ISIIC set-up to a called user having migrated from SwMI B, using re-routeing .45
5.2.1.5 Loop avoidance in case of intra-TETRA call.48
5.2.1.6 Unsuccessful ANF-ISIIC call set-up.49
5.2.1.7 Transmission control.51
5.2.1.8 Call modify.52
5.2.1.9 Call restoration after migration .53
5.2.1.10 Call clearing.55
5.2.1.11 Radio traffic channel resource queuing and allocation.55
5.2.2 Definition of information flows.56
5.2.2.1 CALL RESTORE.56
5.2.2.2 CALL RESTORE PREPARE .57
5.2.2.3 CHARACTERISTIC CHANGE.57
5.2.2.4 COMPLETE.58
5.2.2.5 INFORM 1.58
5.2.2.6 INFORM 2.59
5.2.2.7 INFORM 3.59
5.2.2.8 MIGRATION.59
5.2.2.9 MODIFY.60
5.2.2.10 RELEASE.60
5.2.2.11 SETUP.61
5.2.2.12 SETUP PROLONGATION.62
5.2.2.13 TROMBONE.63
5.2.2.14 TX-CEASED.63
5.2.2.14.1 TX-CEASED 1.63
5.2.2.14.2 TX-CEASED 2.63
5.2.2.15 TX-CONTINUE 1.64
5.2.2.16 TX-CONTINUE 2.64
5.2.2.17 TX-DEMAND.64
5.2.2.18 TX-GRANTED.64
ETSI
5 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
5.2.2.19 TX-INTERRUPT.65
5.2.2.20 TX-WAIT.65
5.2.3 Relationship of information flows to basic call information flows.65
5.3 Functional entity actions .66
5.4 Allocation of functional entities to physical equipment/SwMIs.66
6 ANF-ISIIC stage 3 specification .68
6.1 ANF-ISIIC description.68
6.2 ANF-ISIIC operational requirements .68
6.2.1 Requirements on the originating SwMI.68
6.2.2 Requirements on the terminating SwMI .69
6.2.3 Requirements on a called SwMI when it is different from the terminating SwMI .69
6.2.4 Requirements on a routeing SwMI .70
6.2.5 Requirements on a SwMI with PSTN/ISDN/PISN incoming gateway .70
6.2.6 Requirements on a SwMI with PSTN/ISDN/PISN outgoing gateways.71
6.3 ANF-ISIIC coding requirements .72
6.3.1 TETRA PDUs.72
6.3.1.1 TETRA PDU giving complementary information in the PSS1 SETUP message sent by the
originating or the incoming gateway SwMI.72
6.3.1.2 TETRA PDU giving complementary information in a PSS1 PROGRESS message .76
6.3.1.3 TETRA message sent by the called SwMI in a PSS1 FACILITY message when it is not the
terminating SwMI because of migration or SS-CF invocation .76
6.3.1.4 TETRA message sent by the originating SwMI in a PSS1 FACILITY message to request
forward switching .78
6.3.1.5 TETRA PDU giving complementary information in the PSS1 ALERTING message .79
6.3.1.6 TETRA PDU giving complementary information in the PSS1 CONNECT message.79
6.3.1.7 TETRA information sent by the terminating SwMI in PSS1 FACILITY messages before the
PSS1 ALERTING or CONNECT message.81
6.3.1.8 TETRA information sent by the terminating SwMI in a PSS1 FACILITY message during call
establishment after the PSS1 ALERTING or CONNECT message.82
6.3.1.9 TETRA information sent by the originating SwMI in a PSS1 FACILITY message before the call
has been established .82
6.3.1.10 TETRA CONNECT ACKNOWLEDGE sent by the originating SwMI in a PSS1 FACILITY
message .82
6.3.1.11 Other TETRA messages possibly sent by the originating SwMI in PSS1 FACILITY messages .82
6.3.1.12 TETRA messages possibly sent by either the originating or the terminating SwMI in a PSS1
FACILITY message.84
6.3.1.13 TETRA messages possibly sent by the terminating SwMI in PSS1 FACILITY messages .85
6.3.1.14 TETRA PDUs giving complementary information in PSS1 messages to restore the call after the
calling or the connected user has migrated in a new SwMI .86
6.3.1.14.1 Case where no connection between the old SwMI and the new SwMI already exists or has
been identified .87
6.3.1.14.2 Cases where no new connection is needed between the old SwMI and the new SwMI.88
6.3.1.15 TETRA PDUs giving complementary information in PSS1 DISCONNECT messages.91
6.3.1.16 TETRA PDU giving complementary information in a PSS1 RELEASE message.92
6.3.1.17 TETRA PDUs giving complementary information in a PSS1 RELEASE COMPLETE message .92
6.3.1.18 TETRA PDUs specific for interaction with supplementary service protocol sent to the
originating SwMI in a PSS1 FACILITY message .92
6.3.1.19 TETRA PDUs sent towards the Called or Visited SwMI in a PSS1 FACILITY after the PSS1
call has been connected.93
6.3.1.20 TETRA PDUs sent towards the Called or Originating SwMI in a PSS1 FACILITY after the
PSS1 call has connected.94
6.3.2 TETRA PDU information element coding .95
6.3.2.1 Specific ISI definition of some information elements already defined for air interface messages .96
6.3.2.1.1 Basic service information .96
6.3.2.1.2 Call status.96
6.3.2.1.3 Call time-out, set-up phase .96
6.3.2.1.4 Disconnect cause information element.97
6.3.2.1.5 PDU type.98
6.3.2.2 New information elements used at the ISI .99
6.3.2.2.1 Call diverted to a dispatcher .99
6.3.2.2.2 Call has been forward switched.99
ETSI
6 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
6.3.2.2.3 Call identified as fleet call .99
6.3.2.2.4 Called/forwarded-to external subscriber number.99
6.3.2.2.5 Called/forwarded-to party extension .99
6.3.2.2.6 Called/forwarded-to party SSI.99
6.3.2.2.7 Called/forwarded-to party fleet number SSI.100
6.3.2.2.8 Called/forwarded-to user having migrated .100
6.3.2.2.9 Calling external subscriber number .100
6.3.2.2.10 Calling external subscriber number parameters.100
6.3.2.2.11 Calling party fleet number SSI .100
6.3.2.2.12 Calling party presentation indicator.100
6.3.2.2.13 Cause for PDU addressed to originating SwMI.101
6.3.2.2.14 Connected external subscriber number.101
6.3.2.2.15 Connected external subscriber number parameters .101
6.3.2.2.16 Connected party presentation indicator .101
6.3.2.2.17 Connected party extension.101
6.3.2.2.18 Connected party SSI.101
6.3.2.2.19 Connected party fleet number SSI.102
6.3.2.2.20 Controlling SwMI.102
6.3.2.2.21 Incoming call barring status .102
6.3.2.2.22 Forwarded-to external subscriber number .102
6.3.2.2.23 Forwarded-to user extension .102
6.3.2.2.24 Forwarded-to user SSI.102
6.3.2.2.25 Last Forwarding SwMI MNI.102
6.3.2.2.26 Modify accepted.102
6.3.2.2.27 Modify request.103
6.3.2.2.28 MSISDN present as external subscriber number.103
6.3.2.2.29 New SwMI MNI.103
6.3.2.2.30 Number of digits in called/forwarded-to external subscriber number .103
6.3.2.2.31 Number of digits in calling external subscriber number.103
6.3.2.2.32 Number of digits in connected external subscriber number .103
6.3.2.2.33 Number of digits in forwarded-to external subscriber number.104
6.3.2.2.34 Number of digits in visited/forwarded-to SwMI PISN number.104
6.3.2.2.35 Originating SwMI MNI.104
6.3.2.2.36 Other end SwMI MNI .104
6.3.2.2.37 Override SS-CAD invocation.104
6.3.2.2.38 PDU addressed to originating SwMI.104
6.3.2.2.39 Possible ISI trombone or loop connection detected.104
6.3.2.2.40 Restoring party extension .105
6.3.2.2.41 Restoring party SSI.105
6.3.2.2.41a Radio traffic channel release permission.105
6.3.2.2.41b Radio traffic channel release signalling supported .105
6.3.2.2.41c Resource indicator.106
6.3.2.2.42 Routeing method choice.106
6.3.2.2.43 Routeing method response.106
6.3.2.2.44 Security level at calling user air interface.106
6.3.2.2.44a Setup resource allocation.107
6.3.2.2.45 Speech service requested/chosen/used .107
6.3.2.2.46 Speech services supported.107
6.3.2.2.47 SS-CF invocation counter.107
6.3.2.2.48 SS-CF invoked.107
6.3.2.2.49 SS-CLIR invoked for other party .107
6.3.2.2.50 Terminating SwMI MNI.108
6.3.2.2.51 Visited/forwarded-to SwMI MNI.108
6.3.2.2.52 Visited/forwarded-to SwMI PISN number.108
6.3.3 PSS1 facility information element .108
6.4 ANF-ISIIC state definitions .109
6.5 ANF-ISIIC signalling procedures.109
6.5.1 Call establishment.110
6.5.1.1 Call request, information channel selection, PISN called number sending and call proceeding.110
6.5.1.2 Called user migration.110
6.5.1.2.1 Called user having migrated in SwMI C different from SwMI A .110
6.5.1.2.2 Called user having migrated in SwMI C coinciding with SwMI A.113
ETSI
7 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
6.5.1.3 Call characteristics and set-up time negotiation by the terminating SwMI.113
6.5.1.4 Call confirmation indication and call connected by the terminating SwMI.114
6.5.1.5 Failure of call establishment .115
6.5.2 Call maintenance procedures.116
6.5.2.1 Transmission control procedures .116
6.5.2.2 Call modification and/or continuation.116
6.5.2.3 Call restoration.116
6.5.2.3.1 General call restoration procedure.116
6.5.2.3.2 Specific call restoration procedure in a SwMI already on the path of the call .118
6.5.3 DTMF procedures.121
6.5.4 ANF-ISIIC clearing.121
6.5.5 Call collisions.122
6.6 ANF-ISIIC impact of interworking with ISDN/PISN/PSTN .123
6.7 Protocol interactions between ANF-ISIIC and supplementary services and other ANFs .123
6.7.1 Interaction with SS-CLIR.123
6.7.2 Interactions with SS-CF.124
6.7.2.1 Interaction with SS-CF at call establishment .124
6.7.2.2 Specific interaction with SS-CFNRy at call establishment .124
6.7.2.3 Interaction with SS-CF at call restoration .124
6.7.3 Interaction with SS-CAD.125
6.7.3.1 Invocation of a specific ANF-ISIIC .125
6.7.3.2 Interception of an already invoked ANF-ISIIC.125
6.7.3.3 Call authorization by a distant dispatcher .125
6.7.3.4 Completion of call establishment.125
6.7.3.4.1 Call not diverted to dispatcher.125
6.7.3.4.2 Call diverted to dispatcher.126
6.7.4 Interactions with SS-PC, SS-PPC and SS-CRT.126
6.7.5 Interaction with SS-CW.127
6.7.6 Interaction with SS-HOLD.127
6.7.7 Interaction with SS-CCBS and SS-CCNR.127
6.7.8 Interaction with SS-BIC.127
6.7.9 Interactions with SS-AoC .127
6.7.10 Interactions with other supplementary services .128
6.8 ANF-ISIIC parameter values (timers) .128
Annex A (informative): Static description of the TETRA individual call bearer service, using
attributes .129
Annex B (informative): Definition of the ISI ROSE operation .130
Annex C (informative): Interactions of SS-CFU with ANF-ISIIC.132
C.1 Possible SS-CFU activation .132
C.2 Invocation and operation.132
C.2.1 Called user home SwMI being SwMI A .132
C.2.2 Called user home SwMI being SwMI B.132
C.2.2.1 Forwarded-to user with home SwMI being SwMI B, being registered in its home SwMI.133
C.2.2.2 Forwarded-to user with home SwMI being SwMI B, having migrated.134
C.2.2.3 Forwarded-to user with home SwMI different from SwMI B, being registered in its home SwMI .134
C.2.2.4 Forwarded-to user with home SwMI different from SwMI B, having migrated .134
Annex D (informative): Change Requests.137
History .138
ETSI
8 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs,
...