Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 6: Call Authorized by Dispatcher (CAD)

The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392 10-6 [2] and EN 300 392-11-6 [3] respectively. Aspects relating to all supplementary services are detailed in EN 300392-9 [6]. Charging principles and the Man-Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

Prizemni snopovni radio (TETRA) – Govor in podatki (V+D) – 12. del: Dopolnilne storitve stopnje 3 – 6. poddel: Klic, ki ga je odobril dispečer (CAD)

General Information

Status
Published
Publication Date
31-May-2006
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-2006
Due Date
01-Jun-2006
Completion Date
01-Jun-2006

Buy Standard

Standard
EN 300 392-12-6 V1.3.1:2006
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&$'Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 6: Call Authorized by Dispatcher (CAD)33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 300 392-12-6 Version 1.3.1SIST EN 300 392-12-6 V1.3.1:2006en01-junij-2006SIST EN 300 392-12-6 V1.3.1:2006SLOVENSKI
STANDARD



SIST EN 300 392-12-6 V1.3.1:2006



ETSI EN 300 392-12-6 V1.3.1 (2006-02)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 12: Supplementary services stage 3;Sub-part 6: Call Authorized by Dispatcher (CAD)
SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 2
Reference REN/TETRA-03155 Keywords air interface, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2006. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 3
Contents Intellectual Property Rights.5 Foreword.5 1 Scope.7 2 References.7 3 Definitions and abbreviations.8 3.1 Definitions.8 3.2 Abbreviations.8 4 SS-CAD overview.8 4.1 Functional entities and communication routes.8 4.2 Protocol structure and protocol stack.9 5 SS-CAD service description.9 5.1 General.9 5.2 SS-CAD services offered over the TNSS-SAP.9 5.2.1 ACCEPT response.10 5.2.2 ACCEPTED indication.10 5.2.3 ACTIVATE indication.10 5.2.4 ACTIVATE request.10 5.2.5 CANCEL indication.10 5.2.6 DEACTIVATE indication.10 5.2.7 DEACTIVATE request.11 5.2.8 DEFINE indication.11 5.2.9 DEFINE request.11 5.2.10 DIVERT response.12 5.2.11 DIVERTED indication.12 5.2.12 INTERCEPTED indication.12 5.2.13 INTERROGATE indication.12 5.2.14 INTERROGATE request.12 5.2.15 REJECTED indication.13 5.2.16 REJECT response.13 5.2.17 REQUEST indication.13 5.3 Parameter description.14 6 SS-CAD protocol description.15 6.1 PDU descriptions.15 6.1.1 ACCEPT PDU.16 6.1.2 ACCEPTED PDU.16 6.1.3 ACTIVATE PDU.16 6.1.4 ACTIVATE ACK PDU.17 6.1.5 CANCEL PDU.17 6.1.6 DEACTIVATE PDU.18 6.1.7 DEACTIVATE ACK PDU.18 6.1.8 DEFINE PDU.19 6.1.9 DEFINE ACK PDU.19 6.1.10 DIVERT PDU.20 6.1.11 DIVERTED PDU.20 6.1.12 INTERCEPTED PDU.21 6.1.13 INTERROGATE PDU.21 6.1.14 INTERROGATE ACK PDU.21 6.1.15 PROFILE and PROFILE ACK information elements.22 6.1.16 REJECT PDU.23 6.1.17 REJECTED PDU.23 6.1.18 REQUEST PDU.23 6.2 Information element coding.24 6.2.1 Activation failure reason.24 SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 4
6.2.2 Activation result.25 6.2.3 Activation type.25 6.2.4 Basic service restriction - called party.25 6.2.5 Basic service restriction - calling party.25 6.2.6 CAD PDU type element.25 6.2.7 Deactivation rejection reason.26 6.2.8 Deactivation result.26 6.2.9 Definition failure reason.26 6.2.10 Definition result.27 6.2.11 Dispatcher address type.27 6.2.12 Interception cause.27 6.2.13 Interception type.28 6.2.14 Interrogation failure reason.28 6.2.15 Interrogation result.28 6.2.16 Multiple user mask.28 6.2.17 Range type.28 6.2.18 Rejection cause.28 6.2.19 Restricted basic service.28 6.2.20 Restricted destination address type.29 6.2.21 Restricted destination external subscriber number.29 6.2.22 Restricted parties.29 6.2.23 Restricted source address type.29 6.2.24 Restricted user address type.29 6.2.25 Type of restriction change.29 6.3 SS-CAD protocol states.29 6.4 Protocol states for FE1.30 6.4.1 Protocol states for FE2.31 6.4.2 Protocol states for FE3.35 6.4.3 Protocol states for FE7.37 6.5 Procedures.39 6.5.1 General routing of SS information.39 6.5.2 Procedures for FE1.39 6.5.3 Procedures for FE2.40 6.5.3.1 CAD invocation procedures.40 6.5.3.2 Call authorization.40 6.5.3.3 Activation/deactivation procedures.41 6.5.3.4 Definition procedure.41 6.5.3.5 Interrogation procedure.41 6.5.4 Procedures for FE3.41 6.5.5 Procedures for FE7.42 6.5.5.1 Normal operation of FE7.42 6.5.5.2 Calling user A disconnects during interception.42 6.5.5.3 Activation/deactivation/definition/interrogation requests from the dispatcher.42 Annex A (informative): Change requests.43 History.44
SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Terrestrial Trunked Radio (TETRA). The present document is part 12, sub-part 6 of a multi-part deliverable covering the Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D), as identified below: EN 300 392-1: "General network design"; EN 300 392-2: "Air Interface (AI)"; EN 300 392-3: "Interworking at the Inter-System Interface (ISI)"; ETS 300 392-4: "Gateways basic operation"; EN 300 392-5: "Peripheral Equipment Interface (PEI)"; EN 300 392-7: "Security"; EN 300 392-9: "General requirements for supplementary services"; EN 300 392-10: "Supplementary services stage 1"; EN 300 392-11: "Supplementary services stage 2"; EN 300 392-12: "Supplementary services stage 3"; EN 300 392-12-1: "Call Identification (CI)"; ETS 300 392-12-2: "Call Report (CR)"; EN 300 392-12-3: "Talking Party Identification (TPI)"; EN 300 392-12-4: "Call Forwarding (CF)"; ETS 300 392-12-5: "List Search Call (LSC)"; EN 300 392-12-6: "Call Authorized by Dispatcher (CAD)"; ETS 300 392-12-7: "Short Number Addressing (SNA)"; EN 300 392-12-8: "Area Selection (AS)"; ETS 300 392-12-9: "Access Priority (AP)"; EN 300 392-12-10: "Priority Call (PC)"; ETS 300 392-12-11: "Call Waiting (CW)"; EN 300 392-12-12: "Call Hold (HOLD)"; SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 6
ETS 300 392-12-13: "Call Completion to Busy Subscriber (CCBS)"; EN 300 392-12-14: "Late Entry (LE)"; EN 300 392-12-16: "Pre-emptive Priority Call (PPC)"; EN 300 392-12-17: "Include Call (IC)"; EN 300 392-12-18: "Barring of Outgoing Calls (BOC)"; EN 300 392-12-19: "Barring of Incoming Calls (BIC)"; ETS 300 392-12-20: "Discreet Listening (DL)"; EN 300 392-12-21: "Ambience Listening (AL)"; EN 300 392-12-22: "Dynamic Group Number Assignment (DGNA)"; ETS 300 392-12-23: "Call Completion on No Reply (CCNR)"; ETS 300 392-12-24: "Call Retention (CRT)"; ETS 300 392-13: "SDL model of the Air Interface (AI)"; ETS 300 392-14: "Protocol Implementation Conformance Statement (PICS) proforma specification"; TS 100 392-15: "TETRA frequency bands, duplex spacing and channel numbering"; TS 100 392-16: "Network Performance Metrics"; TR 100 392-17: "TETRA V+D and DMO specifications"; TS 100 392-18: "Air interface optimized applications". NOTE: Part 10, sub-part 15 (Transfer of control), part 13 (SDL) and part 14 (PICS) of this multi-part deliverable are of status "historical" and are not maintained.
National transposition dates Date of adoption of this EN: 17 February 2006 Date of latest announcement of this EN (doa): 31 May 2006 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2006 Date of withdrawal of any conflicting National Standard (dow): 30 November 2006
SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 7
1 Scope The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392-10-6 [2] and EN 300 392-11-6 [3] respectively. Aspects relating to all supplementary services are detailed in EN 300 392-9 [6]. Charging principles and the Man Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. [1] ITU-T Recommendation Z.100: "Specification and Description Language (SDL)". [2] ETSI EN 300 392-10-6: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 6: Call Authorized by Dispatcher (CAD)". [3] ETSI EN 300 392-11-6: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub-part 6: Call Authorized by Dispatcher (CAD)". [4] ETSI EN 300 392-10-1: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 1: Call Identification (CI)". [5] ETSI EN 300 392-2: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)". [6] ETSI EN 300 392-9: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services". [7] ETSI EN 300 392-3-2: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC)". [8] ETSI EN 300 392-12-8: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 8: Area Selection (AS)". SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 8
3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: authorized user: user who can make service definition NOTE: The authorized user can also activate/deactivate and interrogate the service. dispatcher: user to whom the request for authorization shall be directed to NOTE: This user is also able to activate/deactivate SS-CAD for other users (individuals and groups) within his responsibility area and interrogate the activation status for these users. restricted user: user whose calls are forced to be authorized by a dispatcher before the call can proceed NOTE: The restricted user can be either the calling user (A) or the called user (B) or both. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ANF-ISIGC Additional Network Feature - Inter-System Interface Group Call ANF-ISISS Additional Network Feature - Inter-System Interface Supplementary Service CAD Call Authorized by Dispatcher CC Call Control CMCE Circuit Mode Control Entity FE Functional Entity ISI Inter-System Interface LS Line Station MMI Man Machine Interface MS Mobile Station PDU Protocol Data Unit SAP Service Access Point SDL Specification and Description Language SNA Short Number Address SS Supplementary Service NOTE: The abbreviation SS is only used when referring to a specific supplementary service. SS-COLP Supplementary Service - Connected Line Identification Presentation SSI Short Subscriber Identity SS-TPI Supplementary Service - Talking Party Identification SwMI Switching and Management Infrastructure TETRA TErrestrial Trunked RAdio TSI TETRA Subscriber Identity V+D Voice plus Data 4 SS-CAD overview 4.1 Functional entities and communication routes The functional model for SS-CAD consists of Functional Entities FE1 to FE5 as defined in EN 300 392-11-6 [3], clause 4.1. These functional entities can, for one call, be located in different TETRA systems, refer to EN 300 392-11-6 [3], clause 4. SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 9
4.2 Protocol structure and protocol stack SS-CAD PDUs shall be routed as specified in EN 300 392-9 [6] (e.g. at the air interface in facility information elements for the call related SS-CAD PDUs and in U/D-FACILITY PDUs for the call unrelated SS-CAD PDUs, and using ANF-ISISS for conveying SS-CAD PDUs over the ISI). In addition some specific SS-CAD information elements have been included in the definition of some ANF-ISIIC and ANF-ISIGC PDUs. The present document is normative for the protocol architecture and user application Service Access Points (SAPs) within the MS/LS, but gives an informative description of the protocol within the SwMI. 5 SS-CAD service description 5.1 General This clause describes the CAD specific services offered by the Circuit Mode Control Entity (CMCE) at the Supplementary Services Service Access Point (TNSS-SAP) of the TETRA Voice plus Data (V+D) layer 3 service boundary. The SS-CAD service access point may be used in conformance testing as a normative boundary in TETRA Mobile Stations (MSs) and TETRA Line Stations (LSs). NOTE 1: As the present document only deals with the SS-CAD all service primitives has been shown without a TNSS-CAD-prefix e.g. TNSS-CAD-ACTIVATE request is shortened to ACTIVATE request. NOTE 2: User application is the user of the supplementary service. 5.2 SS-CAD services offered over the TNSS-SAP The SS-CAD service primitives at the restricted user MS/LS (FE1) TNSS-SAP shall be: a) ACCEPTED indication; b) DIVERTED indication; c) REJECTED indication; d) INTERCEPTED indication. The SS-CAD service primitives specific at the authorized user MS/LS (FE3) TNSS-SAP shall be: a) DEFINE request; b) DEFINE indication. The SS-CAD service primitives at the authorized user MS/LS (FE3) and dispatcher (FE7) TNSS-SAP shall be: a) ACTIVATE request; b) ACTIVATE indication; c) DEACTIVATE request; d) DEACTIVATE indication; e) INTERROGATE request; f) INTERROGATE indication. The SS-CAD service primitives specific at the dispatcher (FE7) TNSS-SAP shall be: a) ACCEPT response; b) CANCEL indication; c) DIVERT response; SIST EN 300 392-12-6 V1.3.1:2006



ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 10 d) REJECT response; e) REQUEST indication. NOTE: Following service primitives assume that a call identifier or equivalent information is exchanged implicitly or explicitly with the primitive, when the primitive is related to a call. 5.2.1 ACCEPT response The user application shall offer an ACCEPT response to the dispatching user MS/LS (FE7) to indicate that the call has been authorized. The only parameter for this primitive is an optional Access priority. 5.2.2 ACCEPTED indication The calling user MS/LS (FE1) shall offer an ACCEPTED indication to the user application to inform that the call authorization is successfully completed. There are no parameters for this primitive. 5.2.3 ACTIVATE indication The authorized or dispatching user MS/LS (FE3 or FE7) shall offer an ACTIVATE indication to the user application to inform an activation of call authorization. Parameters for the primitive ACTIVATE indication shall be as defined in table 1. Table 1: Parameters for the primitive ACTIVATE indication Parameter Indication Activation result M Restricted user TETRA identity (ies) M (see note) NOTE: It is optional to support more than one identity.
5.2.4 ACTIVATE request The user application shall offer an ACTIVATE request to the aut
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.