Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping

This standard specifies a method of assessing the deformation after crimping of the contacts used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 503: Kontaktverformung nach dem Crimpen

Diese Norm legt ein Verfahren zur Ermittlung der Verformung nach dem Crimpen von Kontakten fest, die in elek-trischen und optischen Verbindungselementen verwendet werden.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 503 : Déformation du contact apres sertissage

La présente norme spécifie une méthode pour vérifier la déformation apres sertissage des contacts utilisés dans les organes de connexion électrique et optique.
Elle doit etre utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
SIST EN 2591-503:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimpingLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 503: Kontaktverformung nach dem CrimpenSérie aérospatiale - Organes de connexion électrique et optique -

Méthodes d'essais - Partie 503 : Déformation du contact apres sertissageAerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-503:2001SIST EN 2591-503:2004en01-maj-2004SIST EN 2591-503:2004SLOVENSKI

STANDARD
SIST EN 2591-503:2004

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-503November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 503: Contact deformation after crimpingSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 503: Déformation ducontact après sertissageLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 503:Kontaktverformung nach dem CrimpenThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-503:2001 ESIST EN 2591-503:2004

EN 2591-503:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA,

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.