SIST EN 3155-063:2009

Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard

This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, size 1, type D, class R, used in elements of connection according to EN 3155-002.
It shall be used together with prEN 3155-001.
The associated female contacts are defined in prEN 3155-064.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 063: Elektrische koaxiale, Stifkontakte, 50 Ohm, Größe 1, Typ D, zum Löten, Klasse R - Produktnorm

Diese Norm legt die Anforderungen, Prüfungen und Werkzeuge für elektrische koaxiale Stiftkontakte,
Größe 1, Typ D, Klasse R, zur Verwendung in elektrischen Verbindungselementen nach EN 3155-002 fest.
Die vorliegende Norm ist in Verbindung mit EN 3155-001 zu verwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155-064 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 063 : Contacts électriques coaxiaux, 50 ohms, taille 1, mâles, type D, à souder, classe R - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 063. del: Kontakti, električni, koaksialni, 50 ohmov, velikost 1, moški, tip D, za spajkanje, razred R - Standard za proizvod

General Information

• Status: Published
• Publication Date: 20-May-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-May-2009
• Due Date: 19-Jul-2009
• Completion Date: 21-May-2009
• Ref Project: EN 3155-063:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 063: Elektrische koaxiale, Stifkontakte, 50 Ohm, Größe 1, Typ D, zum Löten, Klasse R - ProduktnormSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 063 : Contacts électriques coaxiaux, 50 ohms, taille 1, mâles, type D, à souder, classe R - Norme de produitAerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3155-063:2009SIST EN 3155-063:2009en01-julij-2009SIST EN 3155-063:2009SLOVENSKI
STANDARD



SIST EN 3155-063:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-063May 2009ICS 49.060 English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 063: Contacts, electrical, coaxial, 50 ohms,size 1, male, type D, solder, class R - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion - Partie 063 : Contacts électriquescoaxiaux, 50 ohms, taille 1, mâles, type D, à souder, classeR - Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 063: Elektrische koaxiale,Stifkontakte, 50 Ohm, Größe 1, Typ D, zum Löten, KlasseR - ProduktnormThis European Standard was approved by CEN on 31 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-063:2009: ESIST EN 3155-063:2009



EN 3155-063:2009 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Required characteristics .55Designation . 146Marking . 157Delivery conditions . 158Technical specification . 15Bibliography . 16SIST EN 3155-063:2009



EN 3155-063:2009 (E) 3 Foreword This document (EN 3155-063:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn at the latest by November
2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3155-063:2009



EN 3155-063:2009 (E) 4 Introduction The contacts defined by this standard are derived from those of SAE-AS39029/97, and intermateable with those of SAE-AS39029/98. SIST EN 3155-063:2009



EN 3155-063:2009 (E) 5
1 Scope This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, size 1, type D, class R, used in elements of connection according to EN 3155-002. It is intended to be used together with EN 3155-001. The associated female contacts are defined in EN 3155-064. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification1 EN 3682-001, Aerospace series — Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous — Part 001: Technical specification TR 6058, Aerospace series — Cable code identification list
...