Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard

This European Standard specifies the required characteristics, tests and tooling applicable to male contacts size 22, 20, 16, 12, 8 and 5, type A, crimp, class R, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-077.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 076: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse R - Produktnorm

Diese Europäische Norm legt die Anforderungen, Prüfungen und Werkzeuge für Stiftkontakte, Gröβe 22, 20, 16, 12, 8 und 5, Typ A, crimpbar, Klasse R, zur Verwendung in Verbindungselementen nach EN 3155-002 fest.
Die vorliegende Norm sollte in Verbindung mit EN 3155-001 angewandt werden.
Die zugehörigen Buchsenkontakte sind in EN 3155-077 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 076 : Contacts électriques, mâles, type A, à sertir, classe R - Norme de produit

La présente Norme Européenne spécifie les exigences requises, les essais et l’outillage applicables aux
contacts mâles de taille 22, 20, 16, 12, 8 et 5 de type A, à sertir, classe S, utilisés dans les organes de
connexion suivant l'EN 3155-002.
Elle doit être utilisée conjointement avec l’EN 3155-001.
Les contacts femelles associés sont définis dans l’EN 3155-077.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 076. del: Kontakti, električni, moški, tip A, stisljivi, razred R - Standard za izdelek

Ta evropski standard določa zahtevane lastnosti, preskuse in orodja za moške kontakte, velikost 22, 20, 16, 12, 8 in 5, tip A, stisljivi, razred R, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002. Uporabljal naj bi se s standardom EN 3155-001. Povezani ženski kontakti so določeni v standardu EN 3155-077.

General Information

Status
Withdrawn
Publication Date
19-Jan-2012
Withdrawal Date
18-Dec-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Dec-2019
Due Date
11-Jan-2020
Completion Date
19-Dec-2019

Relations

Buy Standard

Standard
EN 3155-076:2012
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt
- Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 076: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse R - ProduktnormSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 076 : Contacts électriques, mâles, type A, à sertir, classe R - Norme de produitAerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3155-076:2012SIST EN 3155-076:2012en,fr,de01-marec-2012SIST EN 3155-076:2012SLOVENSKI
STANDARD



SIST EN 3155-076:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3155-076
January 2012 ICS 49.060 English Version
Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 076 : Contacts électriques, mâles, type A, à sertir, classe R - Norme de produit
Luft- und Raumfahrt
- Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 076: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse R - Produktnorm This European Standard was approved by CEN on 4 May 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3155-076:2012: ESIST EN 3155-076:2012



EN 3155-076:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .43Terms, definitions and abbreviations .54Requirements .55Designation . 126Marking . 127Technical specification . 12SIST EN 3155-076:2012



EN 3155-076:2012 (E) 3 Foreword This document (EN 3155-076:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 3155-076:2012



EN 3155-076:2012 (E) 4 Introduction The contacts defined by this standard are to be used in connectors defined by EN 4644-001. 1 Scope This European Standard specifies the required characteristics, tests and tooling applicable to male contacts size 22, 20, 16, 12, 8 and 5, type A, crimp, class R, used in elements of connection according to EN 3155-002. It should be used together with EN 3155-001. The associated female contacts are defined in EN 3155-077. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series — Copper and copper alloys conductors for electrical cables — Product standardF EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methodsF EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3155-077, Aerospace series — Electrical contacts used in elements of connection — Part 077: Contacts, electrical, female, type A, crimp, class R — Product standard EN 4644-001, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 001: Technical specification ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system 1) MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for 2) MIL-I-81969
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.