kSIST FprEN IEC 63522-25:2024
(Main)Electrical relays - Tests and Measurements - Part 7-25: Magnetic interference
Electrical relays - Tests and Measurements - Part 7-25: Magnetic interference
Elektrische Relais – Mess- und Prüfverfahren – Teil 25: Magnetische Störung
Relais électriques - Essais et mesurages - Partie 25: Perturbations par les champs magnétiques
Električni releji - Preskusi in meritve -7-25. del: Magnetno motenje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-25:2023
01-september-2023
Električni releji - Preskusi in meritve -7-25. del: Magnetno motenje
Electrical relays - Tests and Measurements - Part 7-25: Magnetic interference
Ta slovenski standard je istoveten z: prEN IEC 61810-7-25:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-25:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 61810-7-25:2023
oSIST prEN IEC 61810-7-25:2023
94/882/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-25 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-07 2023-09-29
SUPERSEDES DOCUMENTS:
94/789/CD, 94/868/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 121,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays – Tests and Measurements – Part 7-25: Magnetic interference
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 61810-7-25:2023
– 2 – IEC CDV 61810-7-25:2023 © IEC 2023
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Test procedure . 6
7 5 Evaluation . 8
8 Annex T (normative) Test report . 9
9 Bibliography . 10
11 Figure 1 – Mounting array for adjacent similar relays . 6
12 Figure 2 – Mounting array for adjacent similar relays . 6
13 Figure 3 – Directions of the test current for magnetic interference test, method 3 . 8
oSIST prEN IEC 61810-7-25:2023
IEC CDV 61810-7-25:2023 © IEC 2023 – 3 –
16 INTERNATIONAL ELECTROTECHNICAL COMMISSION
17 ____________
19 Electrical relays –
20 Testing and measurement
22 Part 7-25: Magnetic interference
24 FOREWORD
25 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
26 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
27 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
28 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
29 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
30 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
31 with may participate in this preparatory work. International, governmental and non-governmental organizations
32 liaising with the IEC also participate in this preparation. IEC collaborates closely with the International
33 Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
34 organizations.
35 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
36 consensus of opinion on the relevant subjects since each technical committee has representation from all
37 interested IEC National Committees.
38 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
39 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
40 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
41 misinterpretation by any end user.
42 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
43 transparently to the maximum extent possible in their national and regional publications. Any divergence between
44 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
45 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
46 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
47 services carried out by independent certification bodies.
48 6) All users should ensure that they have the latest edition of this publication.
49 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
50 members of its technical committees and IEC National Committees for any personal injury, property damage or
51 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
52 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
53 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
54 indispensable for the correct application of this publication.
55 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.