SIST EN 14882:2006

Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction

This test method details a method of assessing the frictional property of coated fabrics. The test consists of measuring the force necessary to move a sled on the surface of coated fabric test specimen and determining the static and dynamic coefficient of friction.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Koeffizienten von Haftreibung und Bewegungsreibung

Mit diesem Prüfverfahren wird ein Verfahren zur Bewertung der Reibungseigenschaften von beschichteten textilen Flächengebilden ausführlich dargestellt. Die Prüfung umfasst die Messung der erforderlichen Kraft zum Bewegen eines Schlittens auf der Oberfläche eines Probekörpers des beschichteten Flächengebildes und die Bestimmung des Koeffizienten der Haftreibung und der Bewegungsreibung.

Supports textiles revetus de caoutchouc ou de plastique - Détermination des coefficients de frottement statique et dynamique

La présente méthode d'essai est une méthode d'évaluation de la résistance au frottement des supports textiles revetus. L'essai consiste a mesurer la force nécessaire pour déplacer un traîneau a la surface d'une éprouvette de support textile revetu et a déterminer les coefficients de frottement statique et dynamique.

Gumirane ali plastificirane tekstilije - Ugotavljanje statičnega in dinamičnega tornega količnika

General Information

• Status: Published
• Publication Date: 28-Feb-2006
• ICS: 59.080.40 - Coated fabrics
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2006
• Due Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Ref Project: EN 14882:2005 - Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14882:2006
01-marec-2006
*XPLUDQHDOLSODVWLILFLUDQHWHNVWLOLMH8JRWDYOMDQMHVWDWLþQHJDLQGLQDPLþQHJD
WRUQHJDNROLþQLND
Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of
friction
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Koeffizienten von
Haftreibung und Bewegungsreibung
Supports textiles revetus de caoutchouc ou de plastique - Détermination des coefficients
de frottement statique et dynamique
Ta slovenski standard je istoveten z: EN 14882:2005
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
SIST EN 14882:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14882:2006

---------------------- Page: 2 ----------------------

SIST EN 14882:2006
EUROPEAN STANDARD
EN 14882
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 59.080.40

English Version
Rubber or plastic coated fabrics - Determination of the static and
dynamic coefficient of friction
Supports textiles revêtus de caoutchouc ou de plastique - Mit Kautschuk oder Kunststoff beschichtete Textilien -
Détermination des coefficients de frottement statique et Bestimmung der Koeffizienten von Haftreibung und
dynamique Bewegungsreibung
This European Standard was approved by CEN on 1 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14882:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14882:2006
EN 14882:2005 (E)
Contents page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .5
6 Preparation of the test specimens.7
7 Conditioning.7
8 Procedure .8
9 Calculation and expression of results.8
10 Test report .9
Annex A (informative) Principle of the test method.10

2

---------------------- Page: 4 ----------------------

SIST EN 14882:2006
EN 14882:2005 (E)
Foreword
This European Standard (EN 14882:2005) has been prepared by Technical Committee CEN/TC 248 “Textiles
and textile products”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn
at the latest by February 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 14882:2006
EN 14882:2005 (E)
1 Scope
This test method details a method of assessing the frictional property of coated fabrics. The test consists of
measuring the force necessary to move a sled on the surface of coated fabric test specimen and determining
the static and dynamic coefficient of friction.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN ISO 845, Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988)
EN ISO 1302, Geometrical Product Specifications (GPS) - Indication of surface texture in technical product
documentation (ISO 1302:2002)
EN ISO 2231, Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO
2231:1989)
EN ISO 2286-1, Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for
determination of length, width and net mass (ISO 2286-1:1998)
EN ISO 5084, Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996)
EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1:
Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO
7500-1:2004)
EN ISO 12947-1:1998, Textiles - Determination of the abrasion resistance of fabrics by the Martindale method
- Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998)
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply.
3.1
coefficient of static friction (µ )
s
coefficient calculated from the ratio of the force necessary to cause the tangential separation of two stationary
surfaces to the perpendicular force acting upon the two surfaces
3.2
coefficient of dynamic friction (µ )
d
coefficient calculated from the ratio of the force necessary to maintain a constant velocity between two
surfaces in contact to the perpendicular force acting upon the two surfaces
4 Principle
A sled is attached to a strain gauge and is linked to an autographic recording device The sled is caused to
move against the test specimen which is either rigidly mounted on a horizontal bed or the base of the sled.
The force to initiate the movement of the sled and thereafter maintain a constant velocity is measured.
From specific forces, the coefficients of friction (static and dynamic) a
...