59.080.40 - Coated fabrics

This document specifies a method for the determination of the bursting strength of rubber or plastics
coated fabrics, using a mechanically operated steel ball.

This International Standard describes a test method for the determination of the bending force of
rubber or plastic coated textile

This document specifies a method for the determination of the bursting strength of rubber - or plastics
- coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both
operated by hydraulic pressure.
The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to
5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from
70 kPa to 1 400 kPa.

This document specifies a method for the determination of the bursting strength of rubber or plastics coated fabrics, using a mechanically operated steel ball.

This document specifies a test method for the determination of the bending force of rubber or plastics-coated fabrics.

This document specifies a method for the determination of the bursting strength of rubber - or plastics - coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both operated by hydraulic pressure. The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to 5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from 70 kPa to 1 400 kPa.

This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together. The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be exclud...view more

This document describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated
fabrics in the folded condition. The test method is applicable only to products which can be clamped in
the test apparatus used and to products with which the fold made in the test specimen can be caused to
move back and forth along the specimen during the test.
The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified
number of flex cycles, ...view more

This document describes methods of test using biaxial stress states for the determination of the tensile
stiffness properties of biaxially oriented coated fabrics (properties along anisotropic directions, such as
the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted based
coated fabrics).
Other mechanical properties (such as pattern compensation values, shear stiffness, and strength) will be
described in other parts.

This document describes methods of test using biaxial stress states for the determination of the tensile stiffness properties of biaxially oriented coated fabrics (properties along anisotropic directions, such as the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted based coated fabrics).
Other mechanical properties (such as pattern compensation values, shear stiffness, and strength) will be described in other parts.

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated fabrics in the folded condition. The test method is applicable only to products which can be clamped in the test apparatus used and to products with which the fold made in the test specimen can be caused to move back and forth along the specimen during the test.
The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified number of flex cycles, is t...view more

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated fabrics in the folded condition. The test method is applicable only to products which can be clamped in the test apparatus used and to products with which the fold made in the test specimen can be caused to move back and forth along the specimen during the test. The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified number of flex cycles, is ta...view more

This document specifies a method of determining the coating adhesion strength of coated fabrics.

ISO 2411:2017 specifies a method of determining the coating adhesion strength of coated fabrics.

This document specifies two methods for determining, by measurement of the transmission rate, the
permeability of rubber to volatile liquids diffusing into open air.
It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm
and 3,0 mm.
It is restricted to transmission rates of more than 0,1 g/m2·h.
The methods are particularly useful for comparing the relative transmission rates of one liquid through
different materials, or of several liquids ...view more

ISO 2411:2017 specifies a method of determining the coating adhesion strength of coated fabrics.

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air.
It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm.
It is restricted to transmission rates of more than 0,1 g/m2·h.
The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids thr...view more

ISO 4675:2017 specifies a method for determining the ability of fabrics coated with rubber or plastics to resist the effect of low temperature when subjected to bending at specified temperatures after definite periods of exposure. This method is applicable to material with a thickness within the range 0,1 mm to 2,2 mm. For materials of greater thickness than this, modifications to the standard equipment apply (see 9.2, third paragraph). Because fabrics coated with rubber or plastics are used in ...view more

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air. It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm. It is restricted to transmission rates of more than 0,1 g/m2·h. The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids throug...view more