This document specifies a test method which is intended to determine the fogging characteristics of rubber- or plastics-coated fabrics that are used as trim materials in the interior of motor vehicles. The method can also apply to fluid, pasty, powdered or solid raw materials which are the basis for such trim materials or from which the materials are manufactured. The method can also apply to other materials and finished products. The procedure is applicable to the measurement of fog condensate on glass surfaces within the limits of the test conditions. This test cannot measure accurately those cases in which: —   the surface tension of the condensate is low, resulting in early coalescing into a thin transparent film; —   the condensate is present in such a large quantity that the droplets coalesce and form a heavy oily/clear film (this heavy film gives false readings). In such cases, the gravimetric method is preferred.

  • Standard
    16 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off

This document specifies a method for the determination of the bursting strength of rubber or plastics
coated fabrics, using a mechanically operated steel ball.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard describes a test method for the determination of the bending force of
rubber or plastic coated textile

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the bursting strength of rubber - or plastics
- coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both
operated by hydraulic pressure.
The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to
5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from
70 kPa to 1 400 kPa.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the bursting strength of rubber or plastics coated fabrics, using a mechanically operated steel ball.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Draft
    5 pages
    English language
    sale 15% off

This document specifies a test method for the determination of the bending force of rubber or plastics-coated fabrics.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies a method for the determination of the bursting strength of rubber - or plastics - coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both operated by hydraulic pressure. The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to 5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from 70 kPa to 1 400 kPa.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off

This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together. The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces. This document does not apply to coated fabrics, which are tested in accordance with ISO 2411, or textile conveyor belts, which are tested in accordance with ISO 252.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.

  • Standard
    6 pages
    English language
    sale 15% off

This document describes methods of test using biaxial stress states for the determination of the tensile
stiffness properties of biaxially oriented coated fabrics (properties along anisotropic directions, such as
the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted based
coated fabrics).
Other mechanical properties (such as pattern compensation values, shear stiffness, and strength) will be
described in other parts.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated
fabrics in the folded condition. The test method is applicable only to products which can be clamped in
the test apparatus used and to products with which the fold made in the test specimen can be caused to
move back and forth along the specimen during the test.
The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified
number of flex cycles, is taken as a measure of the flex resistance in the folded condition.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated fabrics in the folded condition. The test method is applicable only to products which can be clamped in the test apparatus used and to products with which the fold made in the test specimen can be caused to move back and forth along the specimen during the test.
The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified number of flex cycles, is taken as a measure of the flex resistance in the folded condition.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document describes methods of test using biaxial stress states for the determination of the tensile stiffness properties of biaxially oriented coated fabrics (properties along anisotropic directions, such as the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted based coated fabrics).
Other mechanical properties (such as pattern compensation values, shear stiffness, and strength) will be described in other parts.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated fabrics in the folded condition. The test method is applicable only to products which can be clamped in the test apparatus used and to products with which the fold made in the test specimen can be caused to move back and forth along the specimen during the test. The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified number of flex cycles, is taken as a measure of the flex resistance in the folded condition.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies a method of determining the coating adhesion strength of coated fabrics.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2411:2017 specifies a method of determining the coating adhesion strength of coated fabrics.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies two methods for determining, by measurement of the transmission rate, the
permeability of rubber to volatile liquids diffusing into open air.
It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm
and 3,0 mm.
It is restricted to transmission rates of more than 0,1 g/m2·h.
The methods are particularly useful for comparing the relative transmission rates of one liquid through
different materials, or of several liquids through one material.
Method A, with refilling, is used when testing mixtures of liquids which give different transmission rates.
Method B, with no refilling, is used for a single-component liquid.
NOTE A method for the determination of water vapour transmission rate is given in ISO 2528.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2411:2017 specifies a method of determining the coating adhesion strength of coated fabrics.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air.
It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm.
It is restricted to transmission rates of more than 0,1 g/m2·h.
The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids through one material.
Method A, with refilling, is used when testing mixtures of liquids which give different transmission rates.
Method B, with no refilling, is used for a single-component liquid.
NOTE A method for the determination of water vapour transmission rate is given in ISO 2528.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4675:2017 specifies a method for determining the ability of fabrics coated with rubber or plastics to resist the effect of low temperature when subjected to bending at specified temperatures after definite periods of exposure. This method is applicable to material with a thickness within the range 0,1 mm to 2,2 mm. For materials of greater thickness than this, modifications to the standard equipment apply (see 9.2, third paragraph). Because fabrics coated with rubber or plastics are used in different applications requiring low temperature flexing, no general relationship between this test and service performance can be given or implied.

  • Standard
    5 pages
    English language
    sale 15% off

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air. It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm. It is restricted to transmission rates of more than 0,1 g/m2·h. The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids through one material. Method A, with refilling, is used when testing mixtures of liquids which give different transmission rates. Method B, with no refilling, is used for a single-component liquid. NOTE A method for the determination of water vapour transmission rate is given in ISO 2528.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This International Standard specifies two methods for the determination of the tensile strength of
fabrics coated with rubber or plastics.
— Method 1 — the strip test method, which is a method for the determination of tensile strength and
elongation at break.
— Method 2 — the grab test method, which is a method for the determination of tensile strength only.
The methods apply to test pieces in equilibrium with specific standard atmospheres for testing and
to wet test pieces. Both methods require the use of a constant rate of extension (CRE) tensile-testing
machine.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4674 specifies two methods for determining the forces necessary to initiate and
propagate tearing of a coated fabric using the constant rate of tear method. The methods described are
the following:
— method A: tongue tear;
— method B: trouser tear.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 5470 describes a method of assessing the abrasive wear resistance of coated fabrics
using the Taber abrader.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 1421:2016 specifies two methods for the determination of the tensile strength of fabrics coated with rubber or plastics.
- Method 1 ? the strip test method, which is a method for the determination of tensile strength and elongation at break.
- Method 2 ? the grab test method, which is a method for the determination of tensile strength only.
The methods apply to test pieces in equilibrium with specific standard atmospheres for testing and to wet test pieces. Both methods require the use of a constant rate of extension (CRE) tensile-testing machine.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 5470-1:2016 describes a method of assessing the abrasive wear resistance of coated fabrics using the Taber abrader.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 1421:2016 specifies two methods for the determination of the tensile strength of fabrics coated with rubber or plastics. - Method 1 ? the strip test method, which is a method for the determination of tensile strength and elongation at break. - Method 2 ? the grab test method, which is a method for the determination of tensile strength only. The methods apply to test pieces in equilibrium with specific standard atmospheres for testing and to wet test pieces. Both methods require the use of a constant rate of extension (CRE) tensile-testing machine.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

ISO 4674-1:2016 specifies two methods for determining the forces necessary to initiate and propagate tearing of a coated fabric using the constant rate of tear method. The methods described are the following:
- method A: tongue tear;
- method B: trouser tear.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 2286 specifies methods of determining the total mass per unit area, the mass per unit
area of the coating and the mass per unit area of the substrate cloth of a rubber- or plastics-coated
fabric. Methods for removing coatings of specific compositions are described in Annex A.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 2286 specifies a method for the determination, at a specified pressure, of the thickness
of rubber- and plastics-coated fabrics, irrespective of the type of substrate employed. It is applicable to
single-face, double-face and double-texture coated fabrics, as well as materials in which an expanded
layer is included in the coating.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 2286 specifies methods of determining the length, width and net mass of a roll of
rubber- or plastics-coated fabrics.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 5470-1:2016 describes a method of assessing the abrasive wear resistance of coated fabrics using the Taber abrader.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

ISO 4674-1:2016 specifies two methods for determining the forces necessary to initiate and propagate tearing of a coated fabric using the constant rate of tear method. The methods described are the following: - method A: tongue tear; - method B: trouser tear.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

ISO 2286-3:2016 specifies a method for the determination, at a specified pressure, of the thickness of rubber- and plastics-coated fabrics, irrespective of the type of substrate employed. It is applicable to single-face, double-face and double-texture coated fabrics, as well as materials in which an expanded layer is included in the coating.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2286-1:2016 specifies methods of determining the length, width and net mass of a roll of rubber- or plastics-coated fabrics.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2286-2:2016 specifies methods of determining the total mass per unit area, the mass per unit area of the coating and the mass per unit area of the substrate cloth of a rubber- or plastics-coated fabric. Methods for removing coatings of specific compositions are described in Annex A.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2286-3:2016 specifies a method for the determination, at a specified pressure, of the thickness of rubber- and plastics-coated fabrics, irrespective of the type of substrate employed. It is applicable to single-face, double-face and double-texture coated fabrics, as well as materials in which an expanded layer is included in the coating.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 2286-1:2016 specifies methods of determining the length, width and net mass of a roll of rubber- or plastics-coated fabrics.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 2286-2:2016 specifies methods of determining the total mass per unit area, the mass per unit area of the coating and the mass per unit area of the substrate cloth of a rubber- or plastics-coated fabric. Methods for removing coatings of specific compositions are described in Annex A.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 1420:2016 specifies two methods for the determination of the resistance of rubber- or plastics-coated fabrics to water penetration (hydrostatic resistance) when subjected to a specific hydrostatic pressure over a fixed period of time. Method A specifies the procedure for a low and high hydrostatic pressure and Method B for a low hydrostatic pressure.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off

ISO 7229:2015 specifies two methods for measuring gas transmission through rubber- or plastics-coated fabrics, a property known as permeability.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

The test is used for assessing the resistance of the seams of fabrics made of rubber and of coated textiles against tearing out a needle perpendicular to the stitch in direction. This resistance is characterized by determining the stitch tear force.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method for the determination of the resistance of the seams of rubber or plastic-coated fabrics against tearing out a needle perpendicular to the stitching direction. This resistance is characterized by determining the stitch tear force.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 15619 specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents and related structures. Plastic film and material other than coated fabrics are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents (see 3.3) and related structures.
Plastic film and material other than coated fabrics are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.
This European Standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.
This European Standard applies to upholstery fabrics with a coating on the wear face.
This European Standard does not apply to textile upholstery fabrics covered by EN 14465.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.
This European Standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.
This European Standard applies to upholstery fabrics with a coating on the wear face.
This European Standard does not apply to textile upholstery fabrics covered by EN 14465.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard describes the method for assessing resistance to staining and cleanability of coated fabrics by evaluation of brightness, colour and stain.
This standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard describes the method of determination of the elongation under load and the residual deformation of coated fabrics.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies a test method for assessing resistance to soiling and cleanability of coated fabrics for upholstery. This European standard is applicable to upholstery fabrics with a coating on the wear face.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day