SIST EN 1482-3:2025
(Main)Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 3: Sampling of static heaps
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 3: Sampling of static heaps
This document is applicable to the sampling of the following solid inorganic fertilizers and liming
materials supplied or ready for supply, and stored in static heaps:
— Single nutrient fertilizers,
— Uniform complex fertilizers,
— Milled, granulated or dredged liming materials,
— Any other products, found suitable for sampling by the method described in this part of the
standard, i.e. uniform and non-segregating products,
for the purpose of testing for compliance with legal requirements and other descriptions and
declarations.
NOTE 1 The term product is used throughout the body of this document and is understood to include
fertilizers, liming materials and inhibitors unless otherwise indicated.
NOTE 2 Manufacturers, importers and sellers can choose to use this method to obtain samples of other
products or blends as well as long as both parties to a transaction agree. The build-up of a static heap often leads
to granulometric segregation, which makes the collection of a truly representative sample of many products and
blends unlikely.
NOTE 3 It is the responsibility of manufacturers, importers and sellers, however, to ensure they supply a
product that complies with its label declaration at the moment of delivery and fulfils the expectations of the end
user at the moment of application.
NOTE 4 A method of obtaining a screening sample from a static heap can be found in Annex B.
Düngemittel, Kalkdünger und Inhibitoren - Probenahme und Probenvorbereitung - Teil 3: Probenahme aus statischen Haufwerken
Dieses Dokument ist anwendbar für die Probenahme der folgenden festen anorganischen Düngemittel und Kalkdünger, die bereits geliefert wurden oder lieferbereit sind und in statischen Haufwerken gelagert werden:
- Einnährstoffdünger;
- homogene Mehrnährstoffdünger;
- gemahlene, granulierte oder durch Entschlammung gewonnene Kalkdünger;
- alle anderen Materialien, die für eine Probenahme nach der in diesem Teil der Norm beschriebenen Methode geeignet sind;
zum Zweck der Prüfung der Übereinstimmung mit den gesetzlichen Vorschriften und anderen Beschreibungen und Erklärungen.
ANMERKUNG 1 Der Begriff „Düngemittel“ ist durchgängig in diesem Dokument verwendet worden und schließt, wenn nicht anders angegeben, mineralische Düngemittel, Kalkdünger und Hemmstoffe ein.
ANMERKUNG 2 Hersteller, Importeure und Verkäufer könnten diese Methode auch nutzen, um Proben von anderen Produkten oder Mischungen zu erhalten, sofern beide Transaktionsparteien zustimmen. Der Aufbau eines statischen Haufwerks führt oftmals zu einer granulometrischen Trennung, was die Erhebung einer wirklich repräsentativen Probe unwahrscheinlich macht.
ANMERKUNG 3 Es liegt jedoch in der Verantwortung der Hersteller, Importeure und Verkäufer sicherzustellen, dass sie ein Produkt bereitstellen, das zum Zeitpunkt der Lieferung mit den Angaben auf dem Etikett übereinstimmt, und die Erwartungen des Endnutzers zum Zeitpunkt der Anwendung erfüllt.
Engrais, amendements minéraux basiques et inhibiteurs - Echantillonnage et préparation de l’échantillon - Partie 3 : Echantillonnage des tas statistiques
Le présent document s’applique à l’échantillonnage des engrais inorganiques solides et des amendements minéraux basiques suivants livrés ou prêts à être livrés et stockés en tas statistiques :
- Engrais contenant un seul élément nutritif,
- Engrais complexes uniformes,
- Amendements minéraux basiques broyés, granulés ou dragués,
- Tout autre matériau jugé approprié pour l'échantillonnage selon la méthode décrite dans la présente partie de la norme,
dans le but de tester la conformité aux exigences légales et autres descriptions et déclarations.
NOTE 1 Le terme « engrais » est utilisé tout au long de ce document et inclut les amendements minéraux basiques et les inhibiteurs, sauf indication contraire.
NOTE 2 Les fabricants, les importateurs et les vendeurs peuvent choisir d'utiliser cette méthode pour obtenir des échantillons d'autres produits ou mélanges à condition que les deux parties à la transaction soient d'accord. L'accumulation d'un tas statique conduit souvent à une ségrégation granulométrique, ce qui rend peu probable la collecte d'un échantillon vraiment représentatif.
NOTE 3 Il est toutefois de la responsabilité des fabricants, importateurs et vendeurs de s'assurer qu'ils fournissent un produit qui est conforme à sa déclaration figurant sur l'étiquette au moment de la livraison et qui répond aux attentes de l'utilisateur final au moment de l'application.
Gnojila, sredstva za apnjenje in inhibitorji - Vzorčenje in priprava vzorcev - 3. del: Vzorčenje statičnih kupov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Gnojila, sredstva za apnjenje in inhibitorji - Vzorčenje in priprava vzorcev - 3. del:
Vzorčenje statičnih kupov
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 3:
Sampling of static heaps
Düngemittel, Kalkdünger und Inhibitoren - Probenahme und Probenvorbereitung - Teil 3:
Probenahme aus statischen Haufwerken
Engrais, amendements minéraux basiques et inhibiteurs - Echantillonnage et préparation
de l’échantillon - Partie 3 : Echantillonnage des tas statistiques
Ta slovenski standard je istoveten z: EN 1482-3:2024
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1482-3
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 65.080 Supersedes EN 1482-3:2016
English Version
Fertilizers, liming materials and inhibitors - Sampling and
sample preparation - Part 3: Sampling of static heaps
Engrais, amendements minéraux basiques et Düngemittel, Kalkdünger und Inhibitoren -
inhibiteurs - Echantillonnage et préparation de Probenahme und Probenvorbereitung - Teil 3:
l'échantillon - Partie 3 : Echantillonnage des tas Probenahme aus statischen Haufwerken
statistiques
This European Standard was approved by CEN on 25 November 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1482-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling plans and quantitative data . 6
4.1 General. 6
4.2 Characterization of the batch to be sampled . 6
4.3 Sampling plan . 7
4.3.1 General. 7
4.3.2 Elements of the sampling plan . 7
4.4 Determination of the volume/mass of the batch. 8
4.5 Determination of sampling units and sampling points . 9
4.5.1 Determination of the number and location of the sampling units . 9
4.5.2 Minimum total number of sampling units . 9
4.5.3 Determination of sampling units from which incremental samples shall be taken. 9
4.5.4 Determination of the minimum number of sampling points from which samples are
to be taken . 9
4.6 Quantitative data . 9
4.6.1 Determination of the minimum mass of incremental samples . 9
4.6.2 Mass of incremental samples. 9
4.6.3 Combined/reduced and final samples . 10
5 Incremental sampling methods . 10
5.1 General. 10
5.2 Sampling apparatus . 10
5.3 Procedure . 12
5.4 Combined and reduced samples . 13
6 Final samples . 13
6.1 Division into final samples . 13
6.2 Practical arrangements for final (laboratory) samples . 13
6.2.1 Final sample packaging materials . 13
6.2.2 Dealing with final samples . 13
7 Sampling report . 13
Annex A (informative) Determination of mass/volume of a static heap . 14
A.1 Volume of a conical heap without edgewise limitation . 14
A.2 Volume of a storage box, partly filled (rectangular base, three flanks closed) . 15
A.3 Determination of the mass . 15
Annex B (informative) Alternative method according to GOST . 16
Bibliography . 17
European foreword
This document (EN 1482-3:2024) has been prepared by Technical Committee CEN/TC 260 “Fertilizers
and liming materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2025, and conflicting national standards shall be
withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1482-3:2016.
EN 1482-3 includes the following significant technical changes with respect to EN 1482-3:2016:
— Title, Introduction, Scope, Normative References, Terms and definitions have been updated.
EN 1482 “Fertilizers, liming materials and inhibitors — Sampling and sample preparation” consists of
four parts:
— Part 1: General sampling provisions;
— Part 2: General sample preparation provisions;
— Part 3: Sampling of static heaps;
— Part 4: Sampling for microbiological presence in fertilizers.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Introduction
In response to the standardization request, sampling methods to sample static heaps have been
developed and standardized as specified in this document.
Standardized methods of sampling and analysis are essential in uniformly establishing the compliance
of fertilizing products with legal requirements, as well as any information and/or declarations given on
their supply or readiness for supply.
The aim of these standardized methods is to obtain a representative sample of the whole batch supplied
or ready for supply. General methods to obtain such a sample are given in EN 1482-1. It is under
investigation whether this standard covers organic and organo-mineral fertilizers.
However, where the product is stored in large static heaps it is not always possible or practical to put
the product into motion for a sampling method according to EN 1482-1 to be used. Research has found
that for a limited number of types of products a representative sample can be obtained by sampling
directly from the static heap.
This document describes the method to be used for sampling static heaps of the specified products
within its scope.
1 Scope
This document is applicable to the sampling of the following solid inorganic fertilizers and liming
materials supplied or ready for supply, and stored in static heaps:
— Single nutrient fertilizers,
— Uniform complex fertilizers,
— Milled, granulated or dredged liming materials,
— Any other products, found suitable for sampling by the method described in this part of the
standard, i.e. uniform and non-segregating products,
for the purpose of testing for compliance with legal requirements and other descriptions and
declarations.
NOTE 1 The term product is used throughout the body of this document and is understood to include
fertilizers, liming materials and inhibitors unless otherwise indicated.
NOTE 2 Manufacturers, importers and sellers can choose to use this method to obtain samples of other
products or blends as well as long as both parties to a transaction agree. The build-up of a static heap often leads
to granulometric segregation, which makes the collection of a truly representative sample of many products and
blends unlikely.
NOTE 3 It is the responsibility of manufacturers, importers and sellers, however, to ensure they supply a
product that complies with its label declaration at the moment of delivery and fulfils the expectations of the end
user at the moment of application.
NOTE 4 A method of obtaining a screening sample from a static heap can be found in Annex B.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1482-1:2024, Fertilizers, liming materials and inhibitors — Sampling and sample preparation —
Part 1: General sampling provisions
EN 12944-1, Fertilizers and liming materials - Vocabulary - Part 1: General terms
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1482-1, EN 12944-1 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
sampling unit
area of the surface of the material in the static heap
3.2
sampling point
point in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.