SIST-TP CEN ISO/TR 25108:2007
(Main)Non-destructive testing - Guidelines for NDT personnel training organizations (ISO/TR 25108:2006)
Non-destructive testing - Guidelines for NDT personnel training organizations (ISO/TR 25108:2006)
This Technical Report gives guidelines for non-destructive testing (NDT) training organizations, with the intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification according to recognized standards.
Zerstörungsfreie Prüfung - Richtlinie für Ausbildungsstätten für Personal der zerstörungsfreien Prüfung (ISO/TR 25108:2006)
Essais non destructifs - Lignes directrices pour les organismes de formation du personnel END (ISO/TR 25108:2006)
Neporušitveno preskušanje – Smernice za organizacije, ki usposabljajo osebje za neporušitveno preskušanje (ISO/TR 25108:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 25108:2007
01-januar-2007
Neporušitveno preskušanje – Smernice za organizacije, ki usposabljajo osebje za
neporušitveno preskušanje (ISO/TR 25108:2006)
Non-destructive testing - Guidelines for NDT personnel training organizations (ISO/TR
25108:2006)
Zerstörungsfreie Prüfung - Richtlinie für Ausbildungsstätten für Personal der
zerstörungsfreien Prüfung (ISO/TR 25108:2006)
Essais non destructifs - Lignes directrices pour les organismes de formation du
personnel END (ISO/TR 25108:2006)
Ta slovenski standard je istoveten z: CEN ISO/TR 25108:2006
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST-TP CEN ISO/TR 25108:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL REPORT
CEN ISO/TR 25108
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
July 2006
ICS 19.100
English Version
Non-destructive testing - Guidelines for NDT personnel training
organizations (ISO/TR 25108:2006)
Essais non destructifs - Lignes directrices pour les Zerstörungsfreie Prüfung - Richtlinie für Ausbildungsstätten
organismes de formation du personnel END (ISO/TR für Personal der zerstörungsfreien Prüfung (ISO/TR
25108:2006) 25108:2006)
This Technical Report was approved by CEN on 16 October 2005. It has been drawn up by the Technical Committee CEN/TC 138.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 25108:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN ISO/TR 25108:2006 (E)
Foreword
This document (CEN ISO/TR 25108:2006) has been prepared by Technical Committee CEN/TC
138 "Non-destructive testing", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 135 "Non-destructive testing".
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to announce this CEN Technical Specification: Austria,
Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
2
---------------------- Page: 3 ----------------------
TECHNICAL ISO/TR
REPORT 25108
First edition
2006-07-01
Non-destructive testing — Guidelines for
NDT personnel training organizations
Essais non destructifs — Lignes directrices pour les organismes de
formation du personnel END
Reference number
ISO/TR 25108:2006(E)
©
ISO 2006
---------------------- Page: 4 ----------------------
ISO/TR 25108:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/TR 25108:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard (“state of the art”, for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 25108 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 138, Non-destructive testing, in collaboration with Technical Committee ISO/TC 135, Non-destructive
testing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
© ISO 2006 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO/TR 25108:2006(E)
Introduction
With this Technical Report, ISO/TC 135 and CEN/TC 138 present to the worldwide non-destructive testing
(NDT) community their recommendations for the minimum technical knowledge to be required of NDT
personnel. These recommendations provide means for evaluating and documenting the competence of
personnel whose duties demand the appropriate theoretical and practical knowledge.
As part of the efforts to streamline and harmonize the training and certification of NDT personnel, ISO/TC 135
and CEN/TC 138 have been actively involved in developing guidelines for training syllabuses (ISO/TR 25107)
and for NDT training organizations (this Technical Report). These documents are intended to serve those
involved in training and to be useful in achieving a uniform level of training material and — consequently — in
the competence of personnel.
This document, together with ISO/TR 25107, represents two years of effort for working groups of the two
technical committees in the promotion of harmonization and mutual recognition of minimum requirements
taken from the different existing certification schemes.
The content of this first edition has been based on the experience of the experts as well as on comments from
the end-user industries, as well as the most recent edition of the International Committee for Non-destructive
testing (ICNDT) recommended guidelines.
The time allotment for the different topics takes into account the latest developments in each method and, as
a consequence, the total duration can be sometimes greater than the minimum duration required by ISO 9712
and EN 473.
This Technical Report is to be revised in the coming years in order to maintain a workable document in line
with the development of NDT methods and techniques.
ISO/TC 135 and CEN/TC 138 wish to express their appreciation to all those who contributed to the production
of this publication.
iv © ISO 2006 – All rights reserved
---------------------- Page: 7 ----------------------
TECHNICAL REPORT ISO/TR 25108:2006(E)
Non-destructive testing — Guidelines for NDT personnel
training organizations
1 Scope
This Technical Report gives guidelines for non-destructive testing (NDT) training organizations, with the
intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial
needs.
It also establishes the minimum requirements for effective structured training of NDT personnel to ensure
eligibility for qualification examinations leading to third-party certification according to recognized standards.
NOTE ISO/TR 25107 gives associated guidelines for NDT training syllabuses intended for the general part of training
courses.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 1330 (all parts), Non-destructive testing — Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1330 apply.
4 Training organization management
The training organization should appoint a person to be responsible for the overall management of the training
centre and courses.
A person should also be appointed to be responsible for establishing a quality management system covering
all aspects of the training services provided.
5 Quality management system
The training organization should have a suitable quality management system, e.g. ISO 9001:2000.
The system should be controlled and periodically reviewed according to the stipulations in the quality
management system. The organization should
⎯ determine the necessary competence for personnel performing work affecting the NDT training quality,
⎯ provide training or take other actions to satisfy these needs, and
⎯ evaluate the effectiveness of the action taken, where the competence of an individual is based on
appropriate education, training, skills and experience.
© ISO 2006 – All rights reserved 1
---------------------- Page: 8 ----------------------
ISO/TR 25108:2006(E)
6 Induction of candidates
The training organization should provide all information and conditions necessary for attendance in the
training courses — for example, a system of induction could ensure that, upon receipt of an application for,
training, candidates are provided with unambiguous information/instructions on the following.
⎯ Training course fees, including all that is covered by the fees, and methods of payment. There should be
no hidden extras requiring further payments, and a schedule of course fees should be published.
⎯ Dates and times for course attendance, and clear instructions concerning the location of the training
venue.
⎯ Transport (including information of parking), accommodation and catering arrangements.
⎯ NDT equipment required to be provided by the candidate, and details of the NDT equipmen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.