SIST EN 13282-3:2015

Hydraulic road binders - Part 3: Conformity evaluation

This European Standard specifies the scheme for the evaluation of conformity of hydraulic road binders to their corresponding product specification standards EN 13282-1 and FprEN 13282-2.
This European Standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity.
This European Standard should be linked with Annexes ZA of European Standards covering hydraulic road binders, i.e. EN 13282-1 and FprEN 13282-2, in particular for the assignments of tasks to the manufacturer and to the certification body.

Hydraulische Tragschichtbinder - Teil 3: Konformitätsbewertung

Diese Europäische Norm legt das Verfahren für die Bewertung der Übereinstimmung von hydraulischen Tragschichtbindern mit den Produktnormen EN 13282-1 und FprEN 13282-2 fest.
Diese Europäische Norm enthält technische Regeln für die werkseigene Produktionskontrolle durch den Hersteller einschließlich der internen Überwachungsprüfung von Proben. Sie enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind.
Diese Europäische Norm gilt im Zusammenhang mit dem Anhang ZA der Europäischen Normen zu hydraulischen Tragschichtbindern, d. h. EN 13282-1 und FprEN 13282-2, insbesondere in Bezug auf die Zuordnung der Aufgaben zum Hersteller und zur Zertifizierungsstelle.

Liants hydrauliques routiers - Partie 3: Évaluation de la conformité

La présente Norme européenne spécifie le système d'évaluation de la conformité des liants hydrauliques routiers aux normes de spécifications de produits correspondantes EN 13282-1 et FprEN 13282-2.
La présente Norme européenne fournit les règles techniques pour le contrôle de la production en usine effectué par le fabricant, comprenant les essais d'autocontrôle sur échantillons. Elle fournit également les règles pour les actions à entreprendre en cas de non-conformité.
Il convient d’associer la présente Norme européenne à l’Annexe ZA des Normes européennes traitant des liants hydrauliques routiers, c’est-à-dire l’EN 13282-1 et le FprEN 13282-2, notamment en ce qui concerne l’attribution des tâches au fabricant et à l’organisme de certification.

Hidravlična veziva za ceste - 3. del: Ovrednotenje skladnosti

General Information

• Status: Withdrawn
• Public Enquiry End Date: 29-Oct-2014
• Publication Date: 16-Jun-2015
• Withdrawal Date: 08-May-2024
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CAA - Mineral binders and masonry
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-May-2024
• Due Date: 31-May-2024
• Completion Date: 09-May-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: EN 13282-3:2015 - Hydraulic road binders - Part 3: Conformity evaluation

Relations

• Replaces: SIST EN 13282-3:2013 - Hydraulic road binders - Part 3: Conformity evaluation
• Effective Date: 08-Jun-2022
• Replaces: SIST EN 13282-3:2013 - Hydraulic road binders - Part 3: Conformity evaluation
• Effective Date: 01-Jul-2015
• Replaced By: SIST EN 13282-3:2024 - Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
• Effective Date: 01-Jul-2024
• Revised: oSIST prEN 13282-3:2023 - Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
• Effective Date: 27-Jul-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulische Tragschichtbinder - Teil 3: KonformitätsbewertungLiants hydrauliques routiers - Partie 3: Évaluation de la conformitéHydraulic road binders - Part 3: Conformity evaluation93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13282-3:2015SIST EN 13282-3:2015en,fr,de01-julij-2015SIST EN 13282-3:2015SLOVENSKI
STANDARDSIST EN 13282-3:20131DGRPHãþD



SIST EN 13282-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13282-3
April 2015 ICS 93.080.20 Supersedes EN 13282-3:2013English Version
Hydraulic road binders - Part 3: Conformity evaluation
Liants hydrauliques routiers - Partie 3: Évaluation de la conformité
Hydraulische Tragschichtbinder - Teil 3: Konformitätsbewertung This European Standard was approved by CEN on 1 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13282-3:2015 ESIST EN 13282-3:2015



EN 13282-3:2015 (E) 2
Contents Page
Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Factory production control by the manufacturer . 6 4.1 General requirements . 6 4.1.1 Concept . 6 4.1.2 Work's quality manual . 6 4.1.3 Management systems . 7 4.1.4 System of documentation . 7 4.2 Internal quality control . 7 4.2.1 Process control . 7 4.2.2 Measuring and testing . 8 4.2.3 Handling, storage, packaging and delivery . 8 4.3 Autocontrol testing of samples . 8 4.3.1 Sampling and testing . 8 4.3.2 Evaluation of
...

SLOVENSKI STANDARD
kSIST FprEN 13282-3:2014
01-oktober-2014
+LGUDYOLþQDYH]LYD]DFHVWHGHO9UHGQRWHQMHVNODGQRVWL
Hydraulic road binders - Part 3: Conformity evaluation
Hydraulische Tragschichtbinder - Teil 3: Konformitätsbewertung
Liants hydrauliques routiers - Partie 3: Évaluation de la conformité
Ta slovenski standard je istoveten z: FprEN 13282-3
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
kSIST FprEN 13282-3:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN 13282-3:2014

---------------------- Page: 2 ----------------------
kSIST FprEN 13282-3:2014

EUROPEAN STANDARD
FINAL DRAFT
FprEN 13282-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2014
ICS 93.080.20 Will supersede EN 13282-3:2013
English Version
Hydraulic road binders - Part 3: Conformity evaluation
Liants hydrauliques routiers - Partie 3: Évaluation de la Hydraulische Tragschichtbinder - Teil 3:
conformité Konformitätsbewertung
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 51.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 13282-3:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN 13282-3:2014
FprEN 13282-3:2014 (E)
Contents Page

Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
3.1 Specific definitions . 4
4 Factory production control by the manufacturer . 6
4.1 General requirements . 6
4.1.1 Concept . 6
4.1.2 Work's quality manual . 6
4.1.3 Management systems . 7
4.1.4 System of documentation . 7
4.2 Internal quality control . 7
4.2.1 Pr
...