SIST EN 15466-3:2024
(Main)Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles
Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles
This document describes a method for determination of the solids content and the evaporation behaviour of volatiles of primers for cold and hot applied joint sealants.
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 3: Bestimmung des Feststoffanteils und des Verdunstungsverhaltens der flüchtigen Anteile
Dieses Dokument beschreibt ein Verfahren zur Bestimmung des Feststoffanteils und des Verdunstungsverhaltens der flüchtigen Anteile von Voranstrichen für kalt und heiß verarbeitbare Fugenmassen.
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 3 : Détermination de la teneur en matières solides et du comportement à l'évaporation des substances volatiles
Le présent document décrit une méthode de détermination de la teneur en matières solides et le comportement à l'évaporation des substances volatiles des primaires pour produits de scellement de joints appliqués à froid et à chaud.
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 3. del: Določevanje trdnih delcev in hlapnosti
Ta evropski standard opisuje metodo za določevanje trdnih delcev in hlapnosti predhodnih premazov za hladno in toplo nanosljive tesnilne mase za stike.
General Information
Relations
Overview
SIST EN 15466-3:2024 is the latest European standard developed by CEN for primers used with cold and hot applied joint sealants. This part of the EN 15466 series specifies a standardized method for determining the solids content and the evaporation behaviour of volatiles in primers. Accurate measurement of these properties is essential for ensuring primer quality, coating performance, and durability in sealing applications. The standard replaces the previous 2009 edition and incorporates updated definitions, test procedures, and reporting requirements to support manufacturers, testing laboratories, and construction professionals.
Key Topics
Solids Content Determination
This parameter measures the residual solid fraction of the primer after evaporation of volatiles under controlled heating conditions (110 °C). It quantifies the actual binder and filler content critical to primer performance.Evaporation Behaviour of Volatiles
The method defines how to assess the mass loss of volatile compounds from primers under standard atmosphere (23 °C, 50% RH) after specified conditioning periods (60 and 90 minutes). This helps evaluate drying rates and primer readiness for sealant application.Test Conditions and Procedures
The standard outlines detailed sample preparation, conditioning, and weighing protocols using syringes and Petri dishes. Tests are conducted in triplicate for repeatability, with conditioning in standard atmospheres conforming to EN ISO 291.Calculation Methods
Precise formulas are provided to calculate:- Evaporation loss percentages after 60 and 90 minutes, relative to total evaporation after heating.
- Solids content percentage relative to initial primer mass.
Reporting Requirements
Test reports must include product details, batch information, test dates, individual results, averages, and confirmation of compliance with SIST EN 15466-3:2024.
Applications
SIST EN 15466-3:2024 is vital for industries and professionals involved in:
Road Construction and Maintenance
Ensuring primers used with joint sealants meet rigorous quality standards to withstand environmental and mechanical stresses.Building and Civil Engineering
Controlling primer properties promotes optimal adhesion and longevity of sealants in expansion joints, façade elements, and pavement repairs.Quality Control Laboratories
Standardized testing facilitates batch verification, supplier qualification, and product development by providing reliable data on primer solids and volatile content.Sealant Manufacturing
Manufacturers use this method to tune resin formulations and solvents to balance drying time, adhesion, and handling characteristics.
By verifying the solids content and evaporation characteristics, SIST EN 15466-3:2024 ensures that primers perform consistently for both cold and hot-applied joint sealant systems.
Related Standards
- EN 15466-1:2024 – Determination of homogeneity of primers, complementing the assessment of primer consistency.
- EN 15466-2:2024 – Determination of resistance against alkali for primers, addressing durability in alkaline environments.
- EN 14188-4:2009 – Specifies primer requirements for joint sealants, setting foundational performance parameters.
- EN ISO 291 – Defines standard atmospheres for conditioning and testing plastics, ensuring consistent test environments.
- ISO 188 – Provides guidelines for accelerated aging and heat resistance, relevant to primer aging behavior.
Keywords: SIST EN 15466-3:2024, primers for joint sealants, solids content, evaporation behaviour, volatile content, cold applied sealants, hot applied sealants, primer testing method, CEN standard, road construction materials, sealing materials, joint sealant primers, quality control, standard atmosphere conditioning.
Frequently Asked Questions
SIST EN 15466-3:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles". This standard covers: This document describes a method for determination of the solids content and the evaporation behaviour of volatiles of primers for cold and hot applied joint sealants.
This document describes a method for determination of the solids content and the evaporation behaviour of volatiles of primers for cold and hot applied joint sealants.
SIST EN 15466-3:2024 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 15466-3:2024 has the following relationships with other standards: It is inter standard links to SIST EN 15466-3:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 15466-3:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN 15466-3:2010
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 3. del:
Določevanje trdnih delcev in hlapnosti
Primers for cold and hot applied joint sealants - Part 3: Determination of solids content
and evaporation behaviour of volatiles
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 3: Bestimmung des
Feststoffanteils und des Verdunstungsverhaltens der flüchtigen Anteile
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 3 :
Détermination de la teneur en matières solides et du comportement à l'évaporation des
substances volatiles
Ta slovenski standard je istoveten z: EN 15466-3:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15466-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 15466-3:2009
English Version
Primers for cold and hot applied joint sealants - Part 3:
Determination of solids content and evaporation
behaviour of volatiles
Primaires pour produits de scellement de joints Voranstriche für kalt und heiß verarbeitbare
appliqués à froid et à chaud - Partie 3 : Détermination Fugenmassen - Teil 3: Bestimmung des Feststoffanteils
de la teneur en matières solides et du comportement à und des Verdunstungsverhaltens der flüchtigen Anteile
l'évaporation des substances volatiles
This European Standard was approved by CEN on 12 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15466-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 3
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 5
6 Procedure. 5
6.1 General . 5
6.2 Conditioning . 5
6.3 Evaporation behaviour . 5
6.4 Solids content . 5
7 Calculation of test results . 6
7.1 Evaporation behaviour of volatiles . 6
7.2 Solids content . 6
8 Expression of results . 7
9 Test report . 7
European foreword
This document (EN 15466-3:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards shall
be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15466-3:2009.
The main changes compared to the previous edition are listed below:
— definition of evaporation behaviour of volatiles has been completed in detail;
— calculation of test results of evaporation behaviour of volatiles has been updated;
— information to be included in the test report has been updated.
This document is one of a series of standards as listed below:
— EN 15466-1, Primers for cold and hot applied joint sealants — Part 1: Determination of homogeneity;
— EN 15466-2, Primers for cold and hot applied joint sealants — Part 2: Determination of resistance
against alkali;
— EN 15466-3, Primers for cold and hot applied joint sealants — Part 3: Determination of solids content
and evaporation behaviour of volatiles.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...