SIST EN 13880-5:2024
(Main)Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
This document describes a method for determining the flow resistance of hot applied joint sealants.
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Dieses Dokument beschreibt ein Verfahren zur Bestimmung der Fließlänge von heiß verarbeitbaren Fugenmassen, um die Stabilität bei erhöhter Temperatur zu charakterisieren.
Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la détermination de la résistance à l'écoulement
Ce document décrit une méthode pour déterminer la résistance au fluage des produits de scellement appliqués à chaud afin de caractériser la stabilité à température élevée.
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje pretočnega upora
Ta dokument opisuje metodo za ugotavljanje pretočnega upora toplo nanosljivih tesnilnih mas za stike.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13880-5:2024
01-junij-2024
Nadomešča:
SIST EN 13880-5:2005
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje
pretočnega upora
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la
détermination de la résistance à l'écoulement
Ta slovenski standard je istoveten z: EN 13880-5:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13880-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13880-5:2024
---------------------- Page: 2 ----------------------
SIST EN 13880-5:2024
EN 13880-5
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13880-5:2004
English Version
Hot applied joint sealants - Part 5: Test method for the
determination of flow resistance
Produits d'étanchéité pour joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 5:
Partie 5 : Méthode d'essai pour la détermination de la Prüfverfahren zur Bestimmung der Fließlänge
résistance à l'écoulement
This European Standard was approved by CEN on 4 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13880-5:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13880-5:2024
EN 13880-5:2024 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Term and definition . 5
4 Principle . 5
5 Apparatus . 5
6 Preparation and conditioning of the test specimens . 7
7 Test conditions . 8
8 Procedure. 8
9 Expression of results . 8
10 Precision . 8
11 Test report .
...
SLOVENSKI STANDARD
oSIST prEN 13880-5:2023
01-september-2023
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje
odpornosti proti tečenju
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Produits de scellement de joints appliqués à chaud - Partie 5: Méthode d'essai pour la
détermination de la résistance au fluage
Ta slovenski standard je istoveten z: prEN 13880-5
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13880-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13880-5:2023
---------------------- Page: 2 ----------------------
oSIST prEN 13880-5:2023
DRAFT
EUROPEAN STANDARD
prEN 13880-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 93.080.20 Will supersede EN 13880-5:2004
English Version
Hot applied joint sealants - Part 5: Test method for the
determination of flow resistance
Produits de scellement de joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 5:
Partie 5: Méthode d'essai pour la détermination de la Prüfverfahren zur Bestimmung der Fließlänge
résistance au fluage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13880-5:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13880-5:2023
prEN 13880-5:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Term and definition . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation and conditioning of the test specimens . 6
7 Test conditions . 7
8 Procedure. 7
9 Expression of results .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.