SIST EN 3510:2019

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bar and section - De ≤ 100 mm

This document specifies the requirements relating to:
Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15)
Solution treated and precipitation treated
Bar and section
De ≤ 100 mm
for aerospace applications.

Luft- und Raumfahrt - Hochcarmfeste Legierung FE-PA2602 (X4NiCrTiMoV26-15) - Lösungsgeglüht und ausgehärtet - Stangen und Profile - De ≤ 100 mm

Série aérospatiale - Alliage résistant à chaud FE-PA2602 (X4NiCrTiMoV26-15) - Mis en solution et précipité - Barres et profilés - De ≤ 100 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud FE-PA2602 (X4NiCrTiMoV26-15) Mis en solution et précipité Barres et profilés De ≤ 100 mm
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina FE-PA2602 (X4NiCrTiMoV26-15) - Topilno žarjena in izločevalno utrjena - Palice in profili - De ≤ 100 mm

Ta dokument določa zahteve, ki se navezujejo na:
toplotno odporno zlitino FE-PA2602 (X4NiCrTiMoV26-15),
topilno žarjeno in izločevalno utrjeno,
palice in profile
De ≤ 100 mm
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 03-Oct-2019
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2019
• Due Date: 06-Dec-2019
• Completion Date: 04-Oct-2019
• Ref Project: EN 3510:2019 - Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3510:2019
01-december-2019
Aeronavtika - Toplotno odporna zlitina FE-PA2602 (X4NiCrTiMoV26-15) - Topilno
žarjena in izločevalno utrjena - Palice in profili - De ≤ 100 mm
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution
treated and precipitation treated - Bar and section - De ≤ 100 mm
Luft- und Raumfahrt - Hochcarmfeste Legierung FE-PA2602 (X4NiCrTiMoV26-15) -
Lösungsgeglüht und ausgehärtet - Stangen und Profile - De ≤ 100 mm
Série aérospatiale - Alliage résistant à chaud FE-PA2602 (X4NiCrTiMoV26-15) - Mis en
solution et précipité - Barres et profilés - De ≤ 100 mm
Ta slovenski standard je istoveten z: EN 3510:2019
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
SIST EN 3510:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3510:2019

---------------------- Page: 2 ----------------------
SIST EN 3510:2019


EN 3510
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 49.025.05
English Version

Aerospace series - Heat resisting alloy FE-PA2602
(X4NiCrTiMoV26-15) - Solution treated and precipitation
treated - Bars and sections - De ≤ 100 mm
Série aérospatiale - Alliage résistant à chaud FE- Luft- und Raumfahrt - Hochwarmfeste Legierung FE-
PA2602 (X4NiCrTiMoV26-15) - Mis en solution et PA2602 (X4NiCrTiMoV26-15) - Lösungsgeglüht und
précipité - Barres et profilés - De ≤ 100 mm ausgehärtet - Stangen und Profile - De ≤ 100 mm
This European Standard was approved by CEN on 22 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3510:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3510:2019
EN 3510:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 3510:2019
EN 3510:2019 (E)
European foreword
This document (EN 3510:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall be
withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the
...