SIST EN ISO 22007-4:2017
(Main)Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
This document specifies a method for the determination of the thermal diffusivity of a thin solid
disc of plastics in the thickness direction by the laser flash method. This method is based upon the
measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short
energy pulse on the front face.
The method can be used for homogeneous solid plastics as well as composites having an isotropic
or orthotropic structure. In general, it covers materials having a thermal diffusivity, α, in the range
1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Measurements can be carried out in gaseous and vacuum
environments over a temperature range from −100 °C to +400 °C.
NOTE For inhomogeneous specimens, the measured values can be specimen thickness dependent.
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 4: Laserblitzverfahren (ISO 22007-4:2017)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 4: Méthode flash laser (ISO 22007-4:2017)
L'ISO 22007-4:2017 spécifie une méthode de détermination de la diffusivité thermique d'un disque plein mince en plastique suivant la direction de l'épaisseur par la méthode flash laser. Cette méthode est fondée sur le mesurage de l'élévation de température sur la face arrière d'une éprouvette sous forme de disque mince due à une courte impulsion énergétique sur la face avant.
La méthode peut être utilisée pour les plastiques compacts homogènes ou composites présentant une structure isotrope ou orthotrope. En général, cela inclut les matériaux ayant une diffusivité thermique, α, comprise dans la plage 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Les mesurages peuvent être effectués en environnements gazeux et sous vide sur une plage de températures comprises entre −100 °C et +400 °C.
NOTE Pour des éprouvettes non homogènes, les valeurs mesurées peuvent dépendre de l'épaisseur de l'éprouvette.
Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti - 4. del: Metoda z laserskim bliskom (ISO 22007-4:2017)
Ta dokument določa metodo za ugotavljanje toplotne razprševalnosti tankega trdnega diska iz polimernega materiala v smeri debeline z metodo z laserskim bliskom. Ta metoda temelji na merjenju dviga temperature na zadnji strani tankega diska, do katerega pride zaradi kratkega energetskega impulza na sprednji strani.
Metoda se lahko uporablja za homogene polimerne materiale v trdnem stanju in kompozite z izotropno ali ortotropno strukturo. Na splošno zajema materiale s toplotno razprševalnostjo α v razponu 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Meritve je mogoče opravljati v plinskem in vakuumskem okolju pri temperaturi v razponu od −100 °C do +400 °C.
OPOMBA: Za nehomogene primerke so izmerjene vrednosti lahko odvisne od debeline primerka.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22007-4:2017
01-oktober-2017
1DGRPHãþD
SIST EN ISO 22007-4:2012
Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti
- 4. del: Metoda z laserskim bliskom (ISO 22007-4:2017)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser
flash method (ISO 22007-4:2017)
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 4:
Laserblitzverfahren (ISO 22007-4:2017)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique -
Partie 4: Méthode flash laser (ISO 22007-4:2017)
Ta slovenski standard je istoveten z: EN ISO 22007-4:2017
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 22007-4:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22007-4:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 22007-4:2012
English Version
Plastics - Determination of thermal conductivity and
thermal diffusivity - Part 4: Laser flash method (ISO
22007-4:2017)
Plastiques - Détermination de la conductivité Kunststoffe - Bestimmung der Wärmeleitfähigkeit und
thermique et de la diffusivité thermique - Partie 4: der Temperaturleitfähigkeit - Teil 4:
Méthode flash laser (ISO 22007-4:2017) Laserblitzverfahren (ISO 22007-4:2017)
This European Standard was approved by CEN on 17 June 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22007-4:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4:2017 (E)
European foreword
This document (EN ISO 22007-4:2017) has been prepared by Technical Committee ISO/TC 61 “Plastics”
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 22007-4:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22007-4:2017 has been approved by CEN as EN ISO 22007-4:2017 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22007-4:2017
-------------------
...
SLOVENSKI STANDARD
oSIST prEN ISO 22007-4:2016
01-december-2016
Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti
- 4. del: Metoda z laserskim bliskom (ISO/DIS 22007-4:2016)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser
flash method (ISO/DIS 22007-4:2016)
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 4:
Laserblitzverfahren (ISO/DIS 22007-4:2016)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique -
Partie 4: Méthode flash laser (ISO/DIS 22007-4:2016)
Ta slovenski standard je istoveten z: prEN ISO 22007-4
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 22007-4:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22007-4:2016
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22007-4:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22007-4
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2016-09-23 2016-12-15
Plastics — Determination of thermal conductivity and
thermal diffusivity —
Part 4:
Laser flash method
Plastiques — Détermination de la conductivité thermique et de la diffusivité thermique —
Partie 4: Méthode flash laser
ICS: 83.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 22007-4:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22007-4:2016
ISO/DIS 22007-4:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22007-4:2016
ISO/DIS 22007-4:2016(E)
Contents Page
Foreword . iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Principle .2
5 Apparatus .2
5.1 General .2
5.2 Furnace or climatic chamber .2
5.3 Flash source .4
5.4 Transient detectors.4
5.5 Thickness measurement device .5
6 Test specimen .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.