SIST EN ISO 11432:2021
(Main)Building and civil engineering sealants - Determination of resistance to compression (ISO 11432:2021)
Building and civil engineering sealants - Determination of resistance to compression (ISO 11432:2021)
This document specifies a method for the determination of the resistance to compression of sealants
used in joints in buildings and civil engineering works
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Druckwiderstandes (ISO 11432:2021)
Dieses Dokument legt ein Verfahren zur Bestimmung des Druckwiderstandes von Dichtstoffen fest, die zur Abdichtung von Fugen im Bauwesen verwendet werden.
Mastics pour bâtiments et ouvrages de génie civil - Détermination de la résistance à la compression (ISO 11432:2021)
Le présent document spécifie une méthode de détermination de la résistance à la compression des mastics qui sont utilisés pour des joints dans les bâtiments et les ouvrages de génie civil.
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje odpornosti proti pritisku (ISO 11432:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11432:2021
01-december-2021
Nadomešča:
SIST EN ISO 11432:2005
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje odpornosti
proti pritisku (ISO 11432:2021)
Building and civil engineering sealants - Determination of resistance to compression
(ISO 11432:2021)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Druckwiderstandes (ISO
11432:2021)
Mastics pour bâtiments et ouvrages de génie civil - Détermination de la résistance à la
compression (ISO 11432:2021)
Ta slovenski standard je istoveten z: EN ISO 11432:2021
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 11432:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11432:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 11432:2021
EN ISO 11432
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2021
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 11432:2005
English Version
Building and civil engineering sealants - Determination of
resistance to compression (ISO 11432:2021)
Mastics pour bâtiments et ouvrages de génie civil - Dichtstoffe im Hoch- und Tiefbau - Bestimmung des
Détermination de la résistance à la compression (ISO Druckwiderstandes (ISO 11432:2021)
11432:2021)
This European Standard was approved by CEN on 10 October 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11432:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11432:2021
EN ISO 11432:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11432:2021
EN ISO 11432:2021 (E)
European foreword
This document (EN ISO 11432:2021) has been prepared by Technical Committee ISO/TC 59 "Buildings
and civil engineering works" in collaboration with Technical Committee CEN/SS B02 “Structures” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2022, and conflicting national standards shall be
withdrawn at the latest by April 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11432:2005.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11432:2021 has been approved by CEN as EN ISO 11432:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11432:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 11432:2021
INTERNATIONAL ISO
STANDARD 11432
Third edition
2021-10
Building and civil engineering
sealants — Determination of
resistance to compression
Mastics pour bâtiments et ouvrages de génie civil — Détermination
de la résistance à la compression
Reference number
ISO 11432:2021(E)
© ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 11432:2021
ISO 11432:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11432:2021
ISO 11432:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test specimens . 3
7 Conditioning of test specimens . 4
7.1 General . 4
7.2 Conditioning method A . 4
7.3 Conditioning method B . 4
8 Test procedure .4
9 Expression of results . 5
10 Test report . 5
iii
© ISO 2021 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 11432:2021
ISO 11432:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison
...
SLOVENSKI STANDARD
oSIST prEN ISO 11432:2021
01-maj-2021
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje odpornosti
proti pritisku (ISO/DIS 11432:2021)
Building and civil engineering sealants - Determination of resistance to compression
(ISO/DIS 11432:2021)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Druckwiderstandes (ISO/DIS
11432:2021)
Construction immobilière - Mastics - Détermination de la résistance à la compression
des mastics (ISO/DIS 11432:2021)
Ta slovenski standard je istoveten z: prEN ISO 11432
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN ISO 11432:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 11432:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 11432:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11432
ISO/TC 59/SC 8 Secretariat: SAC
Voting begins on: Voting terminates on:
2021-03-22 2021-06-14
Building and civil engineering sealants — Determination of
resistance to compression
ICS: 91.100.50
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11432:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 11432:2021
ISO/DIS 11432:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 11432:2021
ISO/DIS 11432:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test specimens . 3
7 Conditioning of test specimens . 4
7.1 General . 4
7.2 Conditioning method A . 4
7.3 Conditioning method B . 4
8 Test procedure . 4
9 Expression of results . 5
10 Test report . 5
© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 11432:2021
ISO/DIS 11432:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,
Subcommittee SC 8, Sealants.
This third edition cancels and replaces the second edition ISO 11432:2005, which has been technically
revised.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.