SIST EN ISO 10563:2023
(Main)Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
ISO 10563:2017 specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction.
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO 10563:2023)
Dieses Dokument legt ein Verfahren zur Bestimmung der Änderung von Masse und Volumen von selbst nivel
lierenden und fließbeständigen Fugendichtstoffen fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.
ANMERKUNG Dieses Prüfverfahren ist nicht zur Bestimmung des absoluten maximalen Masse- und Volumenverlustes von geprüften Fugendichtstoffen vorgesehen. Dennoch liefert es Anhaltswerte für den Masse- und Volumenverlust unter bestimmten Parametern.
Mastics pour bâtiments et ouvrages de génie civil - Détermination des variations de masse et de volume (ISO 10563:2023)
ISO 10563:2017 spécifie une méthode pour la détermination des variations de masse et de volume des mastics autonivelants et non coulables utilisés dans des joints dans la construction immobilière.
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje spremembe mase in prostornine (ISO 10563:2023)
Standard ISO 10563:2017 določa metodo za ugotavljanje spremembe mase in prostornine samoizravnalnih in nepolzečih tesnilnih mas, ki se uporabljajo za stike v stavbah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10563:2023
01-september-2023
Nadomešča:
SIST EN ISO 10563:2017
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje spremembe
mase in prostornine (ISO 10563:2023)
Building and civil engineering sealants - Determination of change in mass and volume
(ISO 10563:2023)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO
10563:2023)
Mastics pour bâtiments et ouvrages de génie civil - Détermination des variations de
masse et de volume (ISO 10563:2023)
Ta slovenski standard je istoveten z: EN ISO 10563:2023
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 10563:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10563:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 10563:2023
EN ISO 10563
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 10563:2017
English Version
Building and civil engineering sealants - Determination of
change in mass and volume (ISO 10563:2023)
Mastics pour bâtiments et ouvrages de génie civil - Hochbau - Fugendichtstoffe - Bestimmung der
Détermination des variations de masse et de volume Änderung von Masse und Volumen (ISO 10563:2023)
(ISO 10563:2023)
This European Standard was approved by CEN on 27 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10563:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10563:2023
EN ISO 10563:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10563:2023
EN ISO 10563:2023 (E)
European foreword
This document (EN ISO 10563:2023) has been prepared by Technical Committee ISO/TC 59 "Buildings
and civil engineering works" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10563:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10563:2023 has been approved by CEN as EN ISO 10563:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10563
...
SLOVENSKI STANDARD
oSIST prEN ISO 10563:2023
01-maj-2023
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje spremembe
mase in prostornine (ISO/FDIS 10563:2023)
Building and civil engineering sealants - Determination of change in mass and volume
(ISO/FDIS 10563:2023)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen
(ISO/FDIS 10563:2023)
Bâtiments et ouvrages de génie civil Mastics Détermination des variations de masse et
de volume (ISO/FDIS 10563:2023)
Ta slovenski standard je istoveten z: prEN ISO 10563
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN ISO 10563:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10563:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10563:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10563
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of change
Voting begins on:
2023-03-03 in mass and volume
Voting terminates on:
2023-05-26
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 10563:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10563:2023
ISO/FDIS 10563:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10563
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of change
Voting begins on:
in mass and volume
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 10563:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10563:2023
ISO/FDIS 10563:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials .1
6 Preparation of test specimens .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.