SIST EN ISO 11600:2004/A1:2012
(Amendment)Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002/Amd 1:2011)
Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002/Amd 1:2011)
2010-11-09 EMA: // final draft provided to ISO/CS according to notification received in dataservice on 2010-11-09.
Hochbau - Fugendichtstoffe - Einteilung und Anforderungen von Dichtungsmassen (ISO 11600:2002/Amd 1:2011)
Construction immobilière - Produits pour joints - Classification et exigences pour les mastics (ISO 11600:2002/Amd 1:2011)
Gradnja objektov - Sredstva za stikovanje - Klasifikacija in zahteve za tesnilne mase (ISO 11600:2002/Amd 1:2011)
Mednarodni standard določa tip in razred tesnilnih mas za gradnjo objektov glede na njihove uporabne in delovne značilnosti. Standard predpisuje tudi zahteve in preskusne metode za različne razrede.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11600:2004/A1:2012
01-julij-2012
Gradnja objektov - Sredstva za stikovanje - Klasifikacija in zahteve za tesnilne
mase (ISO 11600:2002/Amd 1:2011)
Building construction - Jointing products - Classification and requirements for sealants
(ISO 11600:2002/Amd 1:2011)
Hochbau - Fugendichtstoffe - Einteilung und Anforderungen von Dichtungsmassen (ISO
11600:2002/Amd 1:2011)
Construction immobilière - Produits pour joints - Classification et exigences pour les
mastics (ISO 11600:2002/Amd 1:2011)
Ta slovenski standard je istoveten z: EN ISO 11600:2003/A1:2011
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 11600:2004/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11600:2004/A1:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 11600:2004/A1:2012
EUROPEAN STANDARD
EN ISO 11600:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 91.100.50
English Version
Building construction - Jointing products - Classification and
requirements for sealants (ISO 11600:2002/Amd 1:2011)
Construction immobilière - Produits pour joints - Hochbau - Fugendichtstoffe - Einteilung und Anforderungen
Classification et exigences pour les mastics (ISO von Dichtungsmassen (ISO 11600:2002/Amd 1:2011)
11600:2002/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 11600:2003; it was approved by CEN on 14 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11600:2003/A1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11600:2004/A1:2012
EN ISO 11600:2003/A1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11600:2004/A1:2012
EN ISO 11600:2003/A1:2011 (E)
Foreword
This document (EN ISO 11600:2003/A1:2011) has been prepared by Technical Committee ISO/TC 59
"Buildings and civil engineering works".
This Amendment to the European Standard EN ISO 11600:2003 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and
conflicting national standards shall be withdrawn at the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11600:2003/Amd 1:2011 has been approved by CEN as a EN ISO 11600:2003/A1:2011
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11600:2004/A1:2012
------
...
SLOVENSKI STANDARD
SIST EN ISO 11600:2004/prA1:2010
01-julij-2010
Gradnja objektov - Sredstva za stikovanje - Klasifikacija in zahteve za tesnilne
mase (ISO 11600:2002/DAM 1: 2010)
Building construction - Jointing products - Classification and requirements for sealants
(ISO 11600:2002/DAM 1:2010)
Hochbau - Fugendichtstoffe - Einteilung und Anforderungen von Dichtungsmassen (ISO
11600:2002/DAM 1:2010)
Construction immobilière - Produits pour joints - Classification et exigences pour les
mastics (ISO 11600:2002/DAM 1:2010)
Ta slovenski standard je istoveten z: EN ISO 11600:2003/prA1
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 11600:2004/prA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11600:2004/prA1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 11600:2004/prA1:2010
EUROPEAN STANDARD
DRAFT
EN ISO 11600:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2010
ICS 91.100.50
English Version
Building construction - Jointing products - Classification and
requirements for sealants (ISO 11600:2002/DAM 1:2010)
Construction immobilière - Produits pour joints - Hochbau - Fugendichtstoffe - Einteilung und Anforderungen
Classification et exigences pour les mastics (ISO von Dichtungsmassen (ISO 11600:2002/DAM 1:2010)
11600:2002/DAM 1:2010)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/SS B02.
This draft amendment A1, if approved, will modify the European Standard EN ISO 11600:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11600:2003/prA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11600:2004/prA1:2010
EN ISO 11600:2003/prA1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11600:2004/prA1:2010
EN ISO 11600:2003/prA1:2010 (E)
Foreword
This document (EN ISO 11600:2003/prA1:2010) has been prepared by Technical Committee ISO/TC 59
"Building construction".
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 11600:2002/DAM 1:2010 has been approved by CEN as a EN ISO 11600:2003/prA1:2010
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11600:2004/prA1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 11600:2004/prA1:2010
DRAFT AMENDMENT ISO 11600:2002/DAmd 1
ISO/TC 59/SC 8 Secretariat: SAC
Voting begins on: Voting terminates on:
2010-05-06 2010-10-06
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Building construction — Jointing products — Classification and
requirements for sealants
AMENDMENT 1
Construction immobilière — Produits pour joints — Classification et exigences pour les mastics
AMENDEMENT 1
ICS 91.100.50
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.