Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

This standard specifies the requirements relating to:
Steel FE-PL1507 (40CrMoV12)
Consumable electrode remelted
Hardened and tempered
Bar for machining
De  50 mm
1 250 MPa  Rm  1 400 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL1507 (40CrMoV12) - Mit selbstverzehrender Elektrode umgeschmolzen - Gehärtet und angelassen - Stangen zur spanenden Bearbeitung - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

1   Anwendungsbereich
Diese Norm legt die Anforderungen an
Stahl FE-PL1507 (40CrMoV12)
Mit selbstverzehrender Elektrode umgeschmolzen
Gehärtet und angelassen
Stangen zur spanenden Bearbeitung
De ≤ 50 mm
1 250 MPa ≤ Rm ≤ 1 400 MPa
für die Anwendung in der Luft  und Raumfahrt fest.

Série aérospatiale - Acier FE-PL1507 (40CrMoV12) - Refondu à l'électrode consommable - Trempé et revenu - Barres pour usinage - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

Aeronavtika - Jeklo FE-PL1507 (40CrMoV12) - Pretaljeno s talilno elektrodo - Utrjeno in mehko žarjeno - Palice za obdelavo - De ≤ 50 mm - 1250 MPa ≤ Rm ≤ 1400 MPa

General Information

Status
Published
Publication Date
31-Mar-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Mar-2009
Due Date
25-May-2009
Completion Date
01-Apr-2009

Buy Standard

Standard
EN 3972:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HFWURGH03D49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3972:2006SIST EN 3972:2009en,de01-maj-2009SIST EN 3972:2009SLOVENSKI
STANDARD



SIST EN 3972:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3972
December 2006 ICS 49.025.10 English Version
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered -Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa
Série aérospatiale - Acier FE-PL1507 (40CrMoV12) - Refondu à l'électrode consommable - Trempé et revenu - Barres pour usinage - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa
Luft- und Raumfahrt - Stahl FE-PL1507 (40CrMoV12) - Mit selbstverzehrender Elektrode umgeschmolzen - Gehärtet und angelassen - Stangen zur spanenden Bearbeitung -De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa This European Standard was approved by CEN on 18 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3972:2006: ESIST EN 3972:2009



EN 3972:2006 (E) 2 Foreword This document (EN 3972:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3972:2009



EN 3972:2006 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PL1507 (40CrMoV12) Consumable electrode remelted Hardened and tempered Bar for machining De ≤ 50 mm 1 250 MPa ≤ Rm ≤ 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.