iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 378-2:2008/kprA1:2009

(Amendment)

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 2: Konstruktion, Herstellung, Prüfung, Kennzeichnung und Dokumentation

Systèmes de réfrigération et pompes à chaleur - Exigences de sécurité et d'environnement - Partie 2: Conception, construction, essais, marquage et documentation

Hladilni sistemi in toplotne črpalke - Varnostnotehnične in okoljevarstvene zahteve - 2. del: Načrtovanje, izdelava, preskušanje, označevanje in dokumentacija

General Information

Status
Not Published
Public Enquiry End Date
04-Feb-2009
ICS
27.080 - Heat pumps
27.200 - Refrigerating technology
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
14-Oct-2019
Due Date
19-Oct-2019
Completion Date
14-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
98/37/EC - Machinery
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 378-2:2008/prA1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

Relations

Revised
SIST EN 378-2:2008 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
Effective Date
01-Jan-2009
Consolidated By
SIST EN 378-2:2008+A1:2009 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
Effective Date
18-Jan-2023
Consolidated By
SIST EN 378-2:2008+A1:2009 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
Effective Date
19-Jan-2023
Consolidated By
SIST EN 378-2:2008+A1:2009 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
Effective Date
01-Jun-2009

Buy Standard

EN 378-2:2008/kprA1:2009EN 378-2:2008/kprA1:2009
PreviousNext
Draft
EN 378-2:2008/kprA1:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 378-2:2008/kprA1:2009
01-januar-2009
+ODGLOQLVLVWHPLLQWRSORWQHþUSDONH9DUQRVWQRWHKQLþQHLQRNROMHYDUVWYHQH]DKWHYH
GHO1DþUWRYDQMHL]GHODYDSUHVNXãDQMHR]QDþHYDQMHLQGRNXPHQWDFLMD
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2:
Design, construction, testing, marking and documentation
Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante
Anforderungen - Teil 2: Konstruktion, Herstellung, Prüfung, Kennzeichnung und
Dokumentation
Systèmes de réfrigération et pompes à chaleur - Exigences de sécurité et
d'environnement - Partie 2: Conception, construction, essais, marquage et
documentation
Ta slovenski standard je istoveten z: EN 378-2:2008/prA1
ICS:
27.080 7RSORWQHþUSDONH Heat pumps
27.200 Hladilna tehnologija Refrigerating technology
SIST EN 378-2:2008/kprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 378-2:2008/kprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 378-2:2008/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 378-2:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2008
ICS

English Version
Refrigerating systems and heat pumps - Safety and
environmental requirements - Part 2: Design, construction,
testing, marking and documentation
Systèmes de réfrigération et pompes à chaleur - Exigences Kälteanlagen und Wärmepumpen - Sicherheitstechnische
de sécurité et d'environnement - Partie 2: Conception, und umweltrelevante Anforderungen - Teil 2: Konstruktion,
construction, essais, marquage et documentation Herstellung, Prüfung, Kennzeichnung und Dokumentation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 182.
This draft amendment A1, if approved, will modify the European Standard EN 378-2:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 378-2:2008/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 378-2:2008/kprA1:2009
EN 378-2:2008/prA1:2008 (E)
Contents Page
Foreword .3
1 Modifications to 6.4.2.2 .4
2 Modifications to 6.4.3.2 .4
3 Addition of Annex ZC .4






















2

---------------------- Page: 4 ----------------------

SIST EN 378-2:2008/kprA1:2009
EN 378-2:2008/prA1:2008 (E)
Foreword
This document (EN 378-2:2008/A1:2008) has been prepared by Technical Committee CEN/TC 182
"Refrigerating systems, safety and environmental requirements", the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
Th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 22712:2023(Main)
Refrigerating systems and heat pumps - Competence of personnel (ISO 22712:2023)
EN ISO 22712:2023

This European Standard defines the activities related to refrigerating circuits and the associated competence profiles and establishes procedures for assessing the competence of persons who carry out these activities.
NOTE    As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this standard. For competences on electrical and electronic systems, it is recommended to refer to national regulations or appropriate European or national standards. This European Standard does not apply to persons carrying out work on self contained refrigerating systems as defined in EN 378-1 from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organisation or individual, responsible for the compliance with statutory requirements on health, safety and environment.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21922:2022(Main)
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
EN ISO 21922:2021

This European Standard specifies safety requirements, safety factors, test methods, test pressures used and marking of refrigerating valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems.
It describes the procedure to be followed when designing (by calculation or by an experimental design method) valve parts subjected to pressure as well as the criteria to be used in the selection of materials.
The standard describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner.
This standard applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-3:2017+A1:2021(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
EN 378-3:2016+A1:2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity.
Systems using refrigerants other than those listed in of !EN 378 1:2016+A1:2020", Annex E are not covered by this standard.
This standard does not apply to goods in storage.
This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-1:2017+A1:2021(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
EN 378-1:2016+A1:2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and selection criteria are used in parts 2, 3 and 4.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity;
Systems using refrigerants other than those listed in Annex E of this European Standard are not covered by this standard.
Annex C specifies how to determine the amount of refrigerant permitted in a given space, which when exceeded, requires additional protective measures to reduce the risk.
Annex E specifies criteria for safety and environmental considerations of different refrigerants used in refrigeration and air conditioning.
This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Product family standards dealing with the safety of refrigerating systems takes precedence over horizontal and generic standards covering the same subject.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14276-2:2020(Main)
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
EN 14276-2:2020

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary piping intended for use in refrigerating systems, heat pumps and secondary cooling and heating systems. These refrigerating systems and heat pump systems are referenced in this standard as refrigerating systems as defined in EN 378-1.
1.2   This European Standard applies to piping including welded or brazed attachments up to and including the flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements.
1.3   This European Standard applies to the selection, application and installation of safety accessories intended to protect the piping during the various phases of the refrigeration cycle.
1.4   This European Standard applies to the following piping:
-   heat exchanger consisting of piping for the purpose of cooling or heating air where piping aspects are predominant;
-   piping incorporated into an assembly (e.g. self-contained system, condensing unit);
-   field erected piping.
1.5   This European Standard applies to piping with an internal pressure down to – 1 bar, to account for the evacuation of the piping prior to charging with refrigerant.
1.6   This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in EN 13480-3 associated with refrigerating systems. It applies to piping subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using prEN 14276-1 or as specified in this European Standard. In addition piping designed to this standard needs to have a maximum design temperature not exceeding 150 °C and a maximum design pressure not exceeding 160 bar. Outside of these limits, EN 13480 should be used for the design construction and inspection of the piping. Under these circumstances, the unique nature of a refrigerating plant, as indicated in the introduction of prEN 14276-1, needs also to be taken into account.
1.7   This European Standard applies to piping where the main pressure bearing parts are manufactured from metallic ductile materials as defined in Clause 4 and in prEN 14276-1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14276-1:2020(Main)
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
EN 14276-1:2020

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced in this standard as refrigerating systems as defined in EN 378-1.
This European Standard applies to vessels, including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors, or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements.
This European Standard applies to pressure vessels with an internal pressure down to – 1 bar, to account for the evacuation of the vessel prior to charging with refrigerant.
This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in EN 13445-3 associated with refrigerating systems. It applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using EN 13445-2 and EN 13445-3 or as specified in this standard. In addition, vessels designed to this standard should have a maximum allowable temperature not exceeding 150 °C and a maximum design pressure not exceeding 160 bars. Outside of these limits, it is important that EN 13445 be used for the design, construction and inspection of the vessel. Under these circumstances, it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard, also be taken into account.
It is important that pressure vessels used in refrigerating systems and heat pumps of category less than II as de-fined in Annex H comply with other relevant clauses of EN 378-2 for vessels.
This European Standard applies to pressure vessels where the main pressure bearing parts are manufactured from metallic ductile materials as defined in Clause 4 and Annex I of this standard.
This European Standard does not apply to vessels of the following types:
-   vessels of riveted construction;
-   multi-layered, autofrettaged or prestressed vessels;
-   vessels directly heated by a flame;
-   « roll bond » heat exchangers.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-4:2017+A1:2019(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
EN 378-4:2016+A1:2019

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term "refrigerating system" used in this European Standard includes heat pumps.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes including heat pumps;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to parts replaced and components added after adoption of this standard if they are not identical in function and capacity.
This standard does not cover "motor vehicle air conditioners" constructed according to product standards such as ISO 13043.
Systems using refrigerants other than those listed in FprEN 378-1:2016, Annex E are not covered by this standard unless they have been assigned to a safety class according to ISO 817.
This standard does not apply to goods in storage.
This standard is not applicable to refrigeration systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
This Part 4 of the European Standard specifies requirements for safety and environmental aspects in relation to operation, maintenance, and repair of refrigerating systems and the recovery, reuse and disposal of all types of refrigerant, refrigerant oil, heat-transfer fluid, refrigerating system and part thereof.
These requirements are intended to minimise risks of injury to persons and damage to property and the environment resulting from improper handling of the refrigerants or from contaminants leading to system breakdown and resultant emission of the refrigerant.
Subclauses 4, 5.1.1 to 5.1.4, 5.2, 5.3.1, 5.3.3 and 6.6 of this European Standard are not applicable to unitary systems having a power cord, being factory sealed, and in conformance with EN 60335 series.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13136:2014+A1:2019(Main)
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
EN 13136:2013+A1:2018

1.1   This European Standard describes the calculation of mass flow for sizing pressure relief devices for components of refrigerating systems.
NOTE   The term "refrigerating system" used in this European Standard includes heat pumps.
1.2   This European Standard describes the calculation of discharge capacities for pressure relief valves and other pressure relief devices in refrigerating systems including the necessary data for sizing these when relieving to atmosphere or to components within the system at lower pressure.
1.3   This European Standard specifies the requirements for selection of pressure relief devices to prevent excessive pressure due to internal and external heat sources, the sources of increasing pressure (e.g. compressor, heaters, etc.) and thermal expansion of trapped liquid.
1.4   This European Standard describes the calculation of the pressure loss in the upstream and downstream line of pressure relief valves and other pressure relief devices and includes the necessary data.
1.5   This European Standard refers to other relevant standards in Clause 5.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14903:2017(Main)
Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
EN ISO 14903:2017

This European Standard is intended to describe the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described in EN 378. The sealed and closed components, joints and parts concerned are, in particular, fittings, bursting discs, flanged or fitted assemblies. The tightness of flexible piping made from non-metallic materials is dealt with in EN 1736. Metal flexible piping are covered by this standard.
The requirements contained in this document are applicable to joints of maximum DN 50 and components of internal volume of maximum 5 l and maximum weight of 50 kg.
This document is intended to characterise their tightness stresses met during their operations, following the fitting procedure specified by the manufacturer, and to specify the minimal list of necessary information to be provided by the supplier of a component to the person in charge of carrying out this procedure.
It specifies the level of tightness of the component, as a whole, and its assembly as specified by its manufacturer.
It applies to the hermetically sealed and closed components, joints and parts used in the refrigerating installations, including those with seals, whatever their material and their design are.
This European Standard specifies additional requirements for mechanical joints that can be recognised as hermetically sealed joints.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-2:2017(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 378-2:2016

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
This Part 2 of this Standard is applicable to the design, construction and installation of refrigerating systems including piping, components and materials and including ancillary equipment directly associated with such systems which are not covered in EN 378-1, EN 378-3 or EN 378-4.  It also specifies requirements for testing, commissioning, marking and documentation. Requirements for secondary heat transfer circuits are excluded except for any safety devices associated with the refrigerating system.  Ancillary equipment includes, for example, fans, fan motors, electrical motors and transmission assemblies for open compressor systems.
The term "refrigerating system" used in this European Standard includes heat pumps.
The standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes, except to road vehicle air conditioners covered by specific product standards such as ISO/DIS 13043 and SAE J 639.;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems; and
d)   to parts replaced and components added after adoption of this standard if they are not identical in function and capacity.
Systems using refrigerants other than those listed in Annex E of EN 378-1 are not covered by this standard unless they have been assigned to a safety class according to ISO 817.
This standard does not apply to goods in storage.
This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.  
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day