SIST EN 61300-2-5:2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/Twist (IEC 61300-2-5:2009)

The purpose of this part of IEC 61300 is to determine the ability of the cable attachment element of the device under test to withstand torsional loads, while under tension, as might be experienced during installation and normal service. The scope of the test also includes those elements designed for ribbon cables.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-5: Prüfungen - Torsion (IEC 61300-2-5:2009)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures -- Partie 2-5: Essais - Torsion/rotation (CEI 61300-2-5:2009)

IEC 61300-2-5:2009 est de déterminer l’aptitude de l’élément de la fixation du câble au dispositif en essai à résister aux efforts de torsion sous tension qui pourraient se produire pendant l’installation et dans des conditions normales de fonctionnement. Le domaine d’application de l’essai comprend également les éléments conçus pour les câbles à rubans. Cette troisième édition annule et remplace la deuxième édition publiée en 2002, dont elle constitue une révision technique. Les modifications techniques par rapport à l’édition précédente sont les suivantes:
- le titre a été modifié;
- la procédure a été revue;
- la figure du montage d’essai d’une terminaison a été ajoutée;
- la sévérité de l’essai a été revue en fonction du composant.
La présente version bilingue (2020-08) correspond à la version anglaise monolingue publiée en 2009-01.

Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in merjenja - 2-5. del: Preskusi - Torzija/obrat (IEC 61300-2-5:2009)

Namen tega dela IEC 61300 je določiti sposobnost sestavnega dela za pritrditev kabla preskušane naprave, da prenese torzijsko obremenitev pod pritiskom, do katere lahko pride med namestitvijo in običajnim delovanjem. Obseg preskusa zajema tudi sestavne dele, ki so zasnovani za trakaste kable.

General Information

• Status: Withdrawn
• Publication Date: 29-May-2011
• Withdrawal Date: 26-Oct-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Oct-2023
• Due Date: 19-Nov-2023
• Completion Date: 27-Oct-2023
• Ref Project: EN 61300-2-5:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion

Relations

• Replaces: SIST EN 61300-2-5:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-5: Tests - Torsion/twist
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN IEC 61300-2-5:2022 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022)
• Effective Date: 25-Oct-2022
• Revised: SIST EN IEC 61300-2-5:2022 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022)
• Effective Date: 13-Oct-2020
• Revised: SIST EN 61300-2-5:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-5: Tests - Torsion/twist
• Effective Date: 20-Mar-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-5:2011
01-julij-2011
1DGRPHãþD
SIST EN 61300-2-5:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3RVWRSNLRVQRYQHJDSUHVNXãDQMD
LQPHUMHQMDGHO3UHVNXVL7RU]LMDREUDW,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-5: Tests - Torsion/Twist (IEC 61300-2-5:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-5: Prüfungen - Torsion (IEC 61300-2-5:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures -- Partie 2-5: Essais - Torsion/rotation (CEI 61300
-2-5:2009)
Ta slovenski standard je istoveten z: EN 61300-2-5:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-5:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-5:2011

---------------------- Page: 2 ----------------------

SIST EN 61300-2-5:2011

EUROPEAN STANDARD
EN 61300-2-5

NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-5:2002


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-5: Tests -
Torsion
(IEC 61300-2-5:2009)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Procédures fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-5: Essais - Teil 2-5: Prüfungen -
Torsion Torsion
(CEI 61300-2-5:2009) (IEC 61300-2-5:2009)




This European Standard was approved by CENELEC on 2011-03-18. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-5:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-5:2011
EN 61300-2-5:2011 - 2 -
Foreword
The text of document 86B/2774/FDIS, future edition 3 of IEC 61300-2-5, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-
CENELEC parallel vote and was approved by CENELEC as EN 61300-2-5 on 2011-03-18.
This European Standard supersedes EN 61300-2-5:2002.
Specific technical changes from EN 61300-2-5:2002 are as follows:
– the title was changed;
– the procedure was reconsidered;
– the figure of closure test set-up was added;
– the severity of the test was reconsidered according to the component.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-12-18
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-03-18
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-5:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-5:2011
- 3 - EN 61300-2-5:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European p
...