SIST-TP CEN/TR 16386:2013

Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory

This Technical Report gives guidance for handling all methacrylate-based materials for dental purposes used in dental laboratories. The intention is to lower the risk of adverse effects on skin and airways when working with such materials. Aspects of this document may be applicable for other areas in Dentistry.

Zahnheilkunde - Leitlinien zur Handhabung von methacrylatbasierenden Materialien im zahntechnischen Labor

Dieser Technische Bericht gibt eine Anleitung für den Umgang mit auf Methacrylat basierenden Materialien für
dentale Zwecke in zahntechnischen Laboren. Damit soll das Risiko für Haut- und Atemwegserkrankungen bei
der Arbeit mit diesen Materialien verringert werden.
ANMERKUNG Aspekte dieses Dokumentes können auf andere Bereiche der Zahnheilkunde anwendbar sein.

Médecine bucco-dentaire - Lignes directrices relatives à la manipulation des matériaux à base de méthacrylate en laboratoire dentaire

Le présent Rapport technique fournit des lignes directrices relatives à la manipulation, à des fins dentaires, des matériaux à base de polymères de méthacrylate utilisés dans les laboratoires dentaires. L'objectif est de réduire les risques d'effets néfastes sur la peau et les voies respiratoires lors des travaux nécessitant ce type de matériau.
NOTE   Des aspects de ce document peuvent s'appliquer à d'autres activités de pratique dentaire.

Zobozdravstvo - Smernice za ravnanje z materiali na osnovi metakrilata v zobozdravstvenem laboratoriju

To tehnično poročilo podaja smernice za ravnanje z vsemi materiali na osnovi metakrilata za zobozdravstvene namene v zobozdravstvenih laboratorijih. Namen je zmanjšati tveganje neugodnih vplivov na kožo in dihalne poti pri delu s takšnimi materiali. Posamezne smernice iz tega dokumenta se lahko uporabljajo na drugih področjih v zobozdravstvu.

General Information

• Status: Published
• Public Enquiry End Date: 30-Apr-2012
• Publication Date: 14-Feb-2013
• ICS: 11.060.10 - Dental materials
• Technical Committee: VAZ - Healthcare
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2013
• Due Date: 08-Apr-2013
• Completion Date: 15-Feb-2013
• Ref Project: CEN/TR 16386:2013 - Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16386:2013
01-marec-2013
Zobozdravstvo - Smernice za ravnanje z materiali na osnovi metakrilata v
zobozdravstvenem laboratoriju
Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory
Zahnheilkunde - Leitlinien zur Handhabung von methacrylatbasierenden Materialien im
zahntechnischen Labor
Médecine bucco-dentaire - Lignes directrices relatives à la manipulation des matériaux à
base de méthacrylate en laboratoire dentaire
Ta slovenski standard je istoveten z: CEN/TR 16386:2013
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST-TP CEN/TR 16386:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 16386:2013

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 16386:2013


TECHNICAL REPORT
CEN/TR 16386

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
January 2013
ICS 11.060.10
English Version
Dentistry - Guidelines for handling methacrylate-based materials
in the dental laboratory
Médecine bucco-dentaire - Lignes directrices relatives à la Zahnheilkunde - Leitlinien zur Handhabung von
manipulation des matériaux à base de méthacrylate en methacrylatbasierenden Materialien im zahntechnischen
laboratoire dentaire Labor


This Technical Report was approved by CEN on 10 June 2012. It has been drawn up by the Technical Committee CEN/TC 55.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16386:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 16386:2013
CEN/TR 16386:2013 (E)
Contents Page
Foreword . 3
Introduction . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Risk management. 4
4.1 Risk assessment . 4
4.2 Health surveillance . 4
4.3 Medical advice . 4
4.4 Reduction of risks . 5
4.4.1 General . 5
4.4.2 Skin . 5
4.4.3 Airways . 5
4.4.4 Eye protection . 5
Annex A (informative) Use of gloves . 6
A.1 General . 6
A.2 Recommendations . 6
Bibliography. 7

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 16386:2013
CEN/TR 16386:2013 (E)
Foreword
This document (CEN/TR 16386:2013) has been prepared by Technical Committee CEN/TC 055 “Dentistry”,
the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared by Working Group 8 Occupational risk assessments of CEN/TC 55
Dentistry.
Introduction
In 2008 CEN/TC 55 established a new working group WG 8 Occupational risk assessments. The rationale for
the group was concern about occupational health issues for personnel working with methacrylate-based
products in dentistry. These materials (e.g. removable denture and orthodontic base materials, tray materials,
dental repair materials etc.) may pose a risk because of the presence of methacrylate monomers. The
objective of WG 8 was to review the present status regarding the prevalence and awareness of the risk of
methacrylate based materials among dental personnel. In addition the occupational health and safety
regulations in different countries were considered. Based on the results of the survey carried out by the group,
this Technical Report has been produced as a guideline for handling methacrylate based materials in dental
laboratories to maintain the safety of the occupational environment.
Aspects of this report may be applicable to dental practises.
After reviewing the scientific literature and making an investigation among European dental technicians,
adverse effects on the skin see
...