SIST EN 12245:2009/AC:2010
(Corrigendum)Transportable gas cylinders - Fully wrapped composite cylinders
Transportable gas cylinders - Fully wrapped composite cylinders
This European Standard specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders for compressed, liquefied and dissolved gases.
NOTE 1 For the purposes of this standard, the word “cylinder” includes tubes.
This standard is applicable to cylinders that comprise a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by a wound composite consisting of fibres of glass, carbon or aramid (or a mixture thereof) embedded in a matrix.
This standard is also applicable to composite cylinders without liners.
This standard is not applicable to gas cylinders which are partially covered with fibres and commonly called "hoop wrapped" cylinders. For hoop wrapped composite cylinders see EN 12257.
NOTE 2 The specification does not address the design, fitting and performance of removable protective sleeves. Where these are fitted they should be considered separately.
Ortsbewegliche Gasflaschen - Vollumwickelte Flaschen aus Verbundwerkstoffen
Bouteilles à gaz transportable - Bouteilles entièrement bobinées en matériaux composites
Premične plinske jeklenke - Popolnoma obvite jeklenke iz kompozitnih mas - Popravek AC
Ta evropski standard opredeljuje minimalne zahteve za materiale, načrtovanje, gradnjo, preskušanje prototipov in rutinske preglede proizvodnje plinskih jeklenk iz kompozitnih mas za stisnjene, utekočinjene in raztopljene pline.
OPOMBA 1: Za namene tega standarda beseda „jeklenka“ vključuje cevi.
Ta standard se uporablja za jeklenke, ki jih sestavlja obloga iz kovinskega materiala (varjenega ali iz celega) ali nekovinskega materiala (ali mešanice le-teh), okrepljena z obvitim kompozitom, ki vsebuje steklena, ogljikova ali aramidna vlakna (ali kombinacijo le-teh), vdelana v matriks.
Ta standard velja tudi za jeklenke iz kompozitnih mas brez oblog.
Ta standard ne velja za plinske jeklenke, ki so delno prekrite z vlakni in so običajno imenovane »obročasto ovite« jeklenke. Za obročasto obvite jeklenke iz kompozitnih mas glejte EN 12257.
OPOMBA 2 Specifikacija ne obravnava načrtovanja, namestitve in delovanja snemljivih zaščitnih obojk. Kadar so nameščene, jih je potrebno obravnavati ločeno.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsbewegliche Gasflaschen - Vollumwickelte Flaschen aus VerbundwerkstoffenBouteilles à gaz transportable - Bouteilles entièrement bobinées en matériaux compositesTransportable gas cylinders - Fully wrapped composite cylinders23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 12245:2009/AC:2010SIST EN 12245:2009/AC:2010en,fr01-oktober-2010SIST EN 12245:2009/AC:2010SLOVENSKI
STANDARD
SIST EN 12245:2009/AC:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12245:2009/AC
June 2010
Juin 2010
Juni 2010 ICS 23.020.30 English version Version Française Deutsche Fassung
Transportable gas cylinders - Fully wrapped composite cylinders
Bouteilles à gaz transportable - Bouteilles entièrement bobinées en matériaux composites
Ortsbewegliche Gasflaschen - Vollumwickelte Flaschen aus Verbundwerkstoffen This corrigendum becomes effective on 2 June 2010 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 2 juin 2010 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 2.Juni 2010 zur Einarbeitung
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.