SIST EN ISO 15875-3:2004

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)

This part of prEN 12318 specifies the characteristics of fittings made from crosslinked polyethylene (PE-X) for piping systems intended to be used for hot and cold water installations within buildings (domestic systems) and for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see table 1 of prEN 12318-1:1999). This standard covers a range of service conditions (application classes) and design pressure classes.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes Polyethylen (PE-X) - Teil 3: Formstücke (ISO 15875-3:2003)

Dieser Teil der EN (155wi023) legt die Anforderungen an Formstücke aus vernetztem Polyethylen (PE-X), aus anderen geeigneten Kunststoffen oder aus anderen Werkstoffen für die Verlegung von Warm- und Kaltwasserleitungen innerhalb und im Umfeld von Gebäuden (Hausinstallations- und Heizungssyteme) fest, für den Transport von Wasser, welches entweder für den menschlichen Gebrauch bestimmt ist oder nicht, unter Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse.

Systemes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylene réticulé (PE-X) - Partie 3: Raccords (ISO 15875-3:2003)

La présente partie de l'EN (155wi023) spécifie les caractéristiques des raccords en polyéthylene réticulé (PE-X) pour les systemes de canalisations destinés aux installations d'eau chaude et froide a l'intérieur et aux environs des constructions (systemes domestiques) et pour les systemes destinés au transport d'eau conformément a la classe d'application.

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 23.040.45 - Plastics fittings
• ICS: 91.140.60 - Water supply systems
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 15875-3:2003 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)

Relations

• Amended By: SIST EN ISO 15875-3:2004/A2:2021 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
• Effective Date: 01-Jan-2021
• Amended By: SIST EN ISO 15875-3:2004/A1:2021 - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
• Effective Date: 01-Feb-2021