iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12201-3:2024/AC:2025

(Corrigendum)

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 3: Formstücke

Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords

Cevni sistemi iz polimernih materialov za oskrbo z vodo in za odvodnjavanje in kanalizacijo pod tlakom - Polietilen (PE) - 3. del: Fitingi

General Information

Status
Published
Publication Date
18-Dec-2024
ICS
23.040.20 - Plastics pipes
23.040.45 - Plastics fittings
91.140.60 - Water supply systems
93.030 - External sewage systems
Technical Committee
PCV - Plastic pipes, fittings and valves
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Dec-2024
Due Date
21-Feb-2025
Completion Date
19-Dec-2024
Ref Project
EN 12201-3:2024/AC:2024 - Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

Relations

Corrects
SIST EN 12201-3:2024 - Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
Effective Date
05-Oct-2024

Buy Standard

EN 12201-3:2024/AC:2025EN 12201-3:2024/AC:2025
PreviousNext
Corrigendum
EN 12201-3:2024/AC:2025
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Cevni sistemi iz polimernih materialov za oskrbo z vodo in za odvodnjavanje in
kanalizacijo pod tlakom - Polietilen (PE) - 3. del: Fitingi
Plastics piping systems for water supply, and for drains and sewers under pressure -
Polyethylene (PE) - Part 3: Fittings
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und
Abwasserdruckleitungen - Polyethylen (PE) - Teil 3: Formstücke
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les
branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) -
Partie 3 : Raccords
Ta slovenski standard je istoveten z: EN 12201-3:2024/AC:2024
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 12201-3:2024/AC

NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 23.040.45; 23.040.20
English version
Plastics piping systems for water supply, and for drains and sewers under
pressure - Polyethylene (PE) - Part 3: Fittings
Systèmes de canalisations en plastique pour Kunststoff-Rohrleitungssysteme für die
l'alimentation en eau et pour les Wasserversorgung und für Entwässerungs-
branchements et les collecteurs und Abwasserdruckleitungen - Polyethylen
d'assainissement avec pre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12201-3:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
EN 12201-3:2024

This document specifies the characteristics of fittings made from polyethylene (PE) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment, attention is drawn to 6.6 of this document. Components manufactured for water for other purposes, drainage and sewerage are possibly not suitable for water supply for human consumption.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with Parts 1, 2, 4 and 5 of EN 12201, it is applicable to PE fittings, their joints and to joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar  );
b)   an operating temperature of 20 °C as a reference temperature;
c)   buried in the ground;
d)   sea outfalls;
e)   laid in water;
f)   above ground, including pipes suspended below bridges.
NOTE 2   For applications operating at constant temperature greater than 20 °C and up to 40 °C, see prEN 12201 1:2021, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours.
NOTE 3   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
These fittings can be of the following types:
a)   fusion fittings;
1)   electrofusion fittings;
2)   spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion);
3)   socket fusion fittings (see Annex A);
b)   mechanical fittings;
1)   compression fittings;
2)   flanged fittings;
c)   fabricated fittings (see Annex B).

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12201-3:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
EN 12201-3:2024

This document specifies the characteristics of fittings made from polyethylene (PE) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment, attention is drawn to 6.6 of this document. Components manufactured for water for other purposes, drainage and sewerage are possibly not suitable for water supply for human consumption.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with Parts 1, 2, 4 and 5 of EN 12201, it is applicable to PE fittings, their joints and to joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar  );
b)   an operating temperature of 20 °C as a reference temperature;
c)   buried in the ground;
d)   sea outfalls;
e)   laid in water;
f)   above ground, including pipes suspended below bridges.
NOTE 2   For applications operating at constant temperature greater than 20 °C and up to 40 °C, see prEN 12201 1:2021, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours.
NOTE 3   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
These fittings can be of the following types:
a)   fusion fittings;
1)   electrofusion fittings;
2)   spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion);
3)   socket fusion fittings (see Annex A);
b)   mechanical fittings;
1)   compression fittings;
2)   flanged fittings;
c)   fabricated fittings (see Annex B).

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7944:2025(Main)
Optics and photonics - Reference wavelengths (ISO 7944:2024)
EN ISO 7944:2024

This document specifies reference wavelengths to be used for the characterization of optical materials, optical systems and instruments, and ophthalmic lenses. It defines the associated principal refractive indices and principal dispersions, as well as the Abbe numbers with regard to these reference wavelengths and principal dispersions.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13695:2025(Main)
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2024)
EN ISO 13695:2024

ISO 13695:2004 specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. ISO 13695:2004 is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditions may also be important.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4908:2025(Main)
Aerospace series - Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys
EN 4908:2024

This document specifies the requirements for the hexavalent chromium free chemical conversion process of magnesium and magnesium alloys to ensure an adhesion base before bonding and painting.
The purpose of this document is to specify design, quality and manufacturing requirements. It does not specify complete in-house process instructions; these are specified in the processors detailed process instructions.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11199-2:2021/A1:2025(Amendment)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Removal of brake requirements (ISO 11199 2:2021/Amd 1:2024)
EN ISO 11199-2:2021/A1:2024

This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-31:2025(Main)
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests (IEC 62052-31:2024)
EN IEC 62052-31:2024

IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control equipment. This document applies to electricity metering equipment designed to:
• measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on communication modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays (electromechanical or static meters);
• operate with detached indicating displays, or without an indicating display (static meters only);
• wall-mounted or to be installed in specified matching sockets or racks;
• optionally, provide additional functions other than those for measurement of electrical energy.
This document also applies to transducer-operated meters or meters designed for operation with Low Power Instrument Transformers (LPIT) or sensors (as defined in the IEC 61869 series).
When equipment in scope of this document is designed to be installed in a specified matching socket, then the requirements apply to, and the tests are performed on, equipment installed in its specified matching socket. However, requirements for sockets and inserting / removing the meters from the socket are outside the scope of this document.
This document is also applicable to auxiliary input and output circuits, operation indicators, and test outputs of equipment for electrical energy measurement.
Equipment used in conjunction with equipment for electrical energy measurement and control may need to comply with additional safety requirements. See also Clause 13.
This document does not apply to:
• meters rated to operate with voltage exceeding 1 000 V AC, or 1 500 V DC;
• metering systems comprising multiple devices physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and mobile meter test equipment;
• reference standard meters;
• conventional or low power instrument transformers;
• equipment with solid-state or other non-electromechanical supply and load control switches.
The safety requirements of this document are based on the following assumptions:
• metering equipment has been installed correctly;
• metering equipment is used generally by ordinary persons, including meter readers and consumers of electrical energy. In many cases, it is installed in a way that it is freely accessible. Its terminal covers cannot be removed, and its case cannot be opened without removing seals (if present) and using a tool;
• during normal use all terminal covers, covers and barriers providing protection against accessing hazardous live parts are in place;
• for installation, configuration, maintenance and repair it may be necessary to remove terminal cover(s), (a part of) the case or barriers so that hazardous live parts may become accessible. Such activities are performed by skilled persons, who have been suitably trained to be aware of working procedures necessary to ensure safety. Therefore, safety requirements covering these conditions are out of the Scope of this document.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. Please see the foreword of IEC 62052-31 f

  • Standard
    215 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 6059-203:2025(Main)
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 203: Coverage
EN 6059-203:2024

This document specifies methods for measuring and calculating the coverage of protection sleeve for electrical cable and cable bundles. It is presupposed to be used together with EN 6059-100.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17976:2025(Main)
Railway applications - Bolting of rail vehicles and components
EN 17976:2024

This European standard specifies the requirements for designing, strength assessment, assembly and servicing of mechanical and electrical bolted joints made from metallic components and bolts
This document is not intended for rivets, lock bolts, self-tapping screws, wood screws, thread-rolling screws, thread-forming and chipboards.
This European Standard is applicable to all rail vehicles.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 6049-005:2025(Main)
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
EN 6049-005:2024

This document specifies the characteristics of post installation flexible mechanical protection sleeves for electrical cable and cable bundles made from meta-aramid fibres and provided with a water repellent protection.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day