SIST EN 50174-1:2018/A1:2020
(Amendment)Information technology - Cabling installation - Part 1: Installation specification and quality assurance
Information technology - Cabling installation - Part 1: Installation specification and quality assurance
This European Standard specifies requirements for the following aspects of information technology cabling:
a) installation specification, quality assurance documentation and procedures;
b) documentation and administration;
c) operation and maintenance.
This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.
Informationstechnik - Installation von Kommunikationsverkabelung - Teil 1: Installationsspezifikation und Qualitätssicherung
Technologies de l'information - Installation de câblages - Partie 1 : Spécification de l'installation et assurance de la qualité
No scope available
Informacijska tehnologija - Kabelska inštalacija - 1. del: Specifikacija in zagotavljanje kakovosti - Dopolnilo A1
General Information
Relations
Overview
EN 50174-1:2018/A1:2020 - Information technology - Cabling installation - Part 1: Installation specification and quality assurance - is a European Standard that defines requirements for planning, documenting, installing and assuring the quality of information technology cabling. It applies to all types of IT cabling, including generic cabling systems designed in accordance with the EN 50173 series. Amendment A1 (published July 2020) corrects remote powering requirements and clarifies test sampling for alien (exogenous) crosstalk.
Key topics
- Installation specification: requirements for how cabling installations should be specified to meet performance and safety goals.
- Quality assurance documentation and procedures: documentation needed for verification, acceptance testing and record-keeping during installation.
- Documentation and administration: labeling, record management and administrative controls for cabling life‑cycle management.
- Operation and maintenance: procedures for maintaining performance over time, including handling of changes and extensions.
- Testing and sampling: updated guidance on minimum sample sizes for alien crosstalk testing (Table F.2 in the amendment), with sample-size rules that scale by population (e.g., specific ranges and ROUNDUP(0.1 × N) guidance).
- Remote powering (Category RP1): amendment corrects and clarifies calculation and documentation expectations when cabling supports remote powering methods.
- Optical fibre testing: editorial updates to table numbering and test parameter references for fibre cabling.
Applications
This standard is used to ensure consistent, verifiable cabling installations across commercial buildings, data centres, educational campuses, healthcare facilities and industrial sites. Typical uses:
- Creating installation specifications and acceptance criteria for cabling contractors
- Developing test plans and sampling strategies for field verification (including alien crosstalk testing)
- Implementing documentation and administration systems for moves/adds/changes
- Planning and documenting installations that carry remote powering (PoE / remote power) to manage safety and compatibility
- Supporting QA processes used by installers, system integrators, consultants and facilities managers
Who should use it
- Telecommunications/cabling installers and contractors
- Network designers and consultants
- QA managers and test technicians
- Facilities and IT managers responsible for lifecycle administration
- Specifiers and procurement teams writing installation contracts
Related standards
- EN 50173 series - generic cabling system design (associated systems)
- ISO 2859 - sampling procedures for inspection by attributes (added to the bibliography by Amendment A1)
EN 50174-1:2018/A1:2020 is essential for anyone specifying, installing or validating IT cabling to recognized European quality and testing practices, especially where alien crosstalk sampling and remote powering controls are relevant.
Frequently Asked Questions
SIST EN 50174-1:2018/A1:2020 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Information technology - Cabling installation - Part 1: Installation specification and quality assurance". This standard covers: This European Standard specifies requirements for the following aspects of information technology cabling: a) installation specification, quality assurance documentation and procedures; b) documentation and administration; c) operation and maintenance. This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.
This European Standard specifies requirements for the following aspects of information technology cabling: a) installation specification, quality assurance documentation and procedures; b) documentation and administration; c) operation and maintenance. This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.
SIST EN 50174-1:2018/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 33.040.50 - Lines, connections and circuits; 35.110 - Networking. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 50174-1:2018/A1:2020 has the following relationships with other standards: It is inter standard links to SIST EN 50174-1:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 50174-1:2018/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Informacijska tehnologija - Kabelska inštalacija - 1. del: Specifikacija in
zagotavljanje kakovosti - Dopolnilo A1
Information technology - Cabling installation - Part 1: Installation specification and quality
assurance
Informationstechnik - Installation von Kommunikationsverkabelung - Teil 1:
Installationsspezifikation und Qualitätssicherung
Technologies de l'information - Installation de câblages - Partie 1 : Spécification de
l'installation et assurance de la qualité
Ta slovenski standard je istoveten z: EN 50174-1:2018/A1:2020
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50174-1:2018/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 35.110
English Version
Information technology - Cabling installation - Part 1: Installation
specification and quality assurance
Technologies de l'information - Installation de câblages - Informationstechnik - Installation von
Partie 1 : Spécification de l'installation et assurance de la Kommunikationsverkabelung - Teil 1:
qualité Installationsspezifikation und Qualitätssicherung
This amendment A1 modifies the European Standard EN 50174-1:2018; it was approved by CENELEC on 2020-05-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50174-1:2018/A1:2020 E
European foreword
This document (EN 50174-1:2018/A1:2020) has been prepared by CLC/TC 215, “Electrotechnical
aspects of telecommunication equipment”.
The following dates are fixed:
• late
...
SLOVENSKI STANDARD
01-september-2020
Informacijska tehnologija - Polaganje kablov - 1. del: Specifikacija in zagotavljanje
kakovosti - Dopolnilo A1
Information technology - Cabling installation - Part 1: Installation specification and quality
assurance
Informationstechnik - Installation von Kommunikationsverkabelung - Teil 1:
Installationsspezifikation und Qualitätssicherung
Technologies de l'information - Installation de câblages - Partie 1 : Spécification de
l'installation et assurance de la qualité
Ta slovenski standard je istoveten z: EN 50174-1:2018/A1:2020
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50174-1:2018/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 35.110
English Version
Information technology - Cabling installation - Part 1: Installation
specification and quality assurance
Technologies de l'information - Installation de câblages - Informationstechnik - Installation von
Partie 1 : Spécification de l'installation et assurance de la Kommunikationsverkabelung - Teil 1:
qualité Installationsspezifikation und Qualitätssicherung
This amendment A1 modifies the European Standard EN 50174-1:2018; it was approved by CENELEC on 2020-05-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50174-1:2018/A1:2020 E
European foreword
This document (EN 50174-1:2018/A1:2020) has been prepared by CLC/TC 215, “Electrotechnical
aspects of telecommunication equipment”.
The following dates are fixed:
• latest
...
기사 제목: SIST EN 50174-1:2018/A1:2020 - 정보기술 - 케이블 설치 - 파트 1: 설치 사양 및 품질 보증 기사 내용: 이 유럽 표준은 정보기술 케이블링의 다음 측면에 대한 요구 사항을 명시합니다 : a) 설치 사양, 품질 보증 문서 및 절차; b) 문서 작성 및 관리; c) 작동 및 유지 보수. 이 유럽 표준은 EN 50173 시리즈에 따라 설계된 제네릭 케이블링 시스템을 포함한 모든 종류의 정보기술 케이블에 적용됩니다.
The article discusses the SIST EN 50174-1:2018/A1:2020 standard, which is related to the installation and quality assurance of information technology cabling. It specifies requirements for installation specifications, quality assurance documentation and procedures, documentation and administration, as well as operation and maintenance. The standard applies to all types of information technology cabling, including generic cabling systems designed according to the EN 50173 series.
記事タイトル：SIST EN 50174-1:2018/A1:2020 - 情報技術- ケーブルの設置- パート1：設置仕様と品質保証 記事内容：このヨーロッパ標準では、情報技術ケーブルの以下の側面に関する要件を規定しています： a) 設置仕様、品質保証の文書と手続き； b) 文書と管理； c) 運用と保守。 このヨーロッパ標準は、EN 50173シリーズに従って設計された一般的なケーブルシステムを含む、すべての種類の情報技術ケーブルに適用されます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...