Protective gloves for firefighters

This standard defines minimum performance requirements and test methods for firefighters' protective gloves. This standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. Protection against accidental contact with liquid chemicals is also provided by gloves complying with this standard. Protective gloves for special firefighting operations, such as those covered by EN 1486, are outside the scope of this standard.

Feuerwehrschutzhandschuhe

In dieser Europäischen Norm werden Mindestanforderungen und Prüfverfahren für Feuerwehrschutzhandschuhe festgelegt.
Diese Europäische Norm gilt nur für Feuerwehrschutzhandschuhe, die die Hände bei normalen Feuerbe-kämpfungstätigkeiten einschließlich Bergung und Rettung schützen.
Diese Feuerwehrschutzhandschuhe sind nicht für Arbeiten mit flüssigen Chemikalien vorgesehen, sie bieten einen gewissen Schutz bei versehentlichem Kontakt mit Chemikalien.
Feuerwehrschutzhandschuhe für besondere Feuerbekämpfungstätigkeiten sind außerhalb des Anwendungs-bereiches dieser Norm.

Gants de protection pour sapeurs-pompiers

Cette norme spécifie les exigences minimales de performances et les méthodes d'essai requises pour les gants de protection pour sapeurs-pompiers. Cette norme s'applique uniquement aux gants de protection pour sapeurs-pompiers qui protegent les mains lors de la lutte contre l'incendie, y compris les opérations de recherche et de sauvetage. La protection contre un contact accidentel avec des produits chimiques liquides est également assurée par des gants conformes a la présente norme.

Zaščitne rokavice za gasilce

General Information

Status
Withdrawn
Publication Date
31-Oct-2003
Withdrawal Date
25-Mar-2008
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Mar-2008
Due Date
17-Apr-2008
Completion Date
26-Mar-2008

Relations

Buy Standard

Standard
EN 659:2003
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 659:2003
01-november-2003
1DGRPHãþD
SIST EN 659:1996
=DãþLWQHURNDYLFH]DJDVLOFH
Protective gloves for firefighters
Feuerwehrschutzhandschuhe
Gants de protection pour sapeurs-pompiers
Ta slovenski standard je istoveten z: EN 659:2003
ICS:
13.220.10 Gašenje požara Fire-fighting
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN 659:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 659:2003

---------------------- Page: 2 ----------------------

SIST EN 659:2003
EUROPEAN STANDARD
EN 659
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2003
ICS 13.340.40 Supersedes EN 659:1996
English version
Protective gloves for firefighters
Gants de protection pour sapeurs-pompiers Feuerwehrschutzhandschuhe
This European Standard was approved by CEN on 7 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 659:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 659:2003
EN 659:2003 (E)
Contents
Page
Foreword. 3
Introduction . 4
1 Scope. 4
2 Normative references . 4
3 Requirements . 5
3.1 General requirements . 5
3.2 Sizes . 5
3.3 Abrasion resistance. 5
3.4 Cut resistance. 5
3.5 Tear resistance. 5
3.6 Puncture resistance. 5
3.7 Burning behaviour . 6
3.8 Convective heat resistance. 6
3.9 Radiant heat resistance. 6
3.10 Contact heat resistance. 6
3.11 Heat resistance of the lining material . 6
3.12 Heat shrinkage. 6
3.13 Dexterity. 6
3.14 Seam breaking strength . 6
3.15 Time for the removal of gloves. 6
3.16 Resistance of glove material to water penetration (optional) . 7
3.17 Whole glove integrity test . 7
3.18 Resistance to liquid chemical penetration . 7
4 Preconditioning and testing conditions . 7
5 Marking. 8
6 Information supplied by the manufacturer. 8
Annex A (informative) Test results - Uncertainty of measurement . 9
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other
provisions of EU Directives. . 10
2

---------------------- Page: 4 ----------------------

SIST EN 659:2003
EN 659:2003 (E)
Foreword
This document (EN 659:2003) has been prepared by Technical Committee CEN/TC 162, "Protective clothing
including hand and arm protection and lifejackets", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latest
by December 2003.
This document supersedes EN 659:1996
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.
Annex A is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 659:2003
EN 659:2003 (E)
Introduction
Suitable gloves for firefighters can enable the firefighters to work for long periods under hazardous conditions.
However, it is not possible to relate the performance levels achieved in laboratory testing to protection levels under
actual use conditions because the thermal hazards in wet and dry conditions may be very different.
1 Scope
This standard defines minimum performance requirements and test methods for firefighters' protective gloves.
This standard applies only to firefighters' protective gloves which protect the hands during normal firefighting,
including search and rescue.
These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against
accidental contact with chemicals.
Protective gloves for special operations within firefighting service are excluded from the scope of this standard.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 344-1:1992, Requirements and test methods for safety, protective and occupational footwear for professional
use.
EN 344-1:1992/A1:1997, Requirements and test methods for safety, protective and occupational footwear for
professional use.
EN 367, Protective clothing- protection against heat and fire- method of determining heat transmission on exposure
to flames.
EN 368, Protective clothing- Protection against liquid chemicals- Test method: Resistance of materials to
penetration by liquids.
EN 388, Protective gloves against mechanical risks.
EN 407, Protective gloves against thermal risks (heat and/or fire).
EN 420:1994, General requirements for gloves.
EN 702, Protective clothing — Protection against heat and flame — Test method: Determination of the contact heat
transmission through protective clothing or its materials.
EN 20811, Textile — Determination of resistance to water penetration —- Hydrostatic pressure test.
EN ISO 6942, Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and
material assemblies when exposed to a source of radiant heat (ISO 6942:2002)
EN ISO 13935-2, Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of
maximum force to seam rupture using the grab method (ISO 13935-2:1999)
4

---------------------- Page: 6 ----------------------

SIST EN 659:2003
EN 659:2003 (E)
ISO 15383, Protective gloves for firefighters — Laboratory test methods and performance requirements.
ISO 17493, Clothing and equipment
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.