SIST EN IEC 63246-2:2022
(Main)Configurable car infotainment services (CCIS) - Part 2: Requirements (IEC 63246-2:2022)
Configurable car infotainment services (CCIS) - Part 2: Requirements (IEC 63246-2:2022)
This part of IEC 63246 specifies the CCIS requirements, which include the general, functional and service requirements for CCIS.
Konfigurierbare Fahrzeug Informationsdienste (CCIS) - Teil 2: Anforderungen (IEC 63246-2:2022)
Services d'infodivertissements configurables pour les véhicules (CCIS) - Partie 2 : Exigences (IEC 63246-2:2022)
L'IEC 63246-2:2022 spécifie les exigences relatives au CCIS, qui incluent les exigences générales, fonctionnelles et de service du CCIS.
Nastavljiva avtomobilska informacijska vzdrževalna storitev (CCIS) - 2. del: Zahteve (IEC 63246-2:2022)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63246-2:2022
01-december-2022
Nastavljiva avtomobilska informacijska vzdrževalna storitev (CCIS) - 2. del:
Zahteve (IEC 63246-2:2022)
Configurable car infotainment services (CCIS) - Part 2: Requirements (IEC 63246-
2:2022)
Konfigurierbare Fahrzeug Informationsdienste (CCIS) - Teil 2: Anforderungen (IEC 63246
-2:2022)
Services d'infodivertissements configurables pour les véhicules (CCIS) - Partie 2 :
Exigences (IEC 63246-2:2022)
Ta slovenski standard je istoveten z: EN IEC 63246-2:2022
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
SIST EN IEC 63246-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63246-2:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 63246-2:2022
EUROPEAN STANDARD EN IEC 63246-2
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 33.160.99; 43.040.15
English Version
Configurable car infotainment services (CCIS) - Part 2:
Requirements
(IEC 63246-2:2022)
Services d'infodivertissements configurables pour les Konfigurierbare Fahrzeug Informationsdienste (CCIS) - Teil
véhicules (CCIS) - Partie 2 : Exigences 2: Anforderungen
(IEC 63246-2:2022) (IEC 63246-2:2022)
This European Standard was approved by CENELEC on 2022-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63246-2:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63246-2:2022
EN IEC 63246-2:2022 (E)
European foreword
The text of document 100/3508/CDV, future edition 1 of IEC 63246-2, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63246-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-03-03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63246-2:2022 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 63246-2:2022
EN IEC 63246-2:2022 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 63246-1 - Configurable car infotainment services EN IEC 63246-1 -
(CCIS) - Part 1: General
3
---------------------- Page: 5 ----------------------
SIST EN IEC 63246-2:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 63246-2:2022
IEC 63246-2
®
Edition 1.0 2022-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Configurable car infotainment services (CCIS) –
Part 2: Requirements
Services d'infodivertissements configurables pour les véhicules (CCIS) –
Partie 2: Exigences
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.99; 43.040.15 ISBN 978-2-8322-1070-8
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 63246-2:2022
– 2 – IEC 63246-2:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 6
4.1 General . 6
4.2 User registration and deregistration . 6
4.3 Device registration and deregistration . 7
4.4 Profile management . 7
4.5 Service provisioning according to authority . 7
4.6 Device monitoring . 7
4.7 Device control . 7
4.8 Content delivery . 7
5 Functional requirements for functional entity . 7
5.1 General . 7
5.2 CCIS user . 8
5.2.1 General . 8
5.2.2 Registration and deregistration . 8
5.2.3 Authentication and authorization . 8
5.2.4 Device control. 9
5.2.5 Content delivery . 9
5.3 CCIS device . 9
5.3.1 General . 9
5.3.2 Registration and deregistration . 9
5.3.3 Status report . 9
5.3.4 Interaction for device control. 9
5.3.5 Interaction for content delivery . 9
5.4 CCIS master . 10
5.4.1 General . 10
5.4.2 Registration of CCIS users . 10
5.4.3 Device registration . 10
5.4.4 Device control. 10
5.4.5 Device monitoring . 10
5.4.6 Content delivery . 10
6 Service requirements for CCIS users . 11
6.1 General . 11
6.2 Car owner . 11
6.3 Temporary owner . 11
6.4 Private client . 11
6.5 Public client . 11
7 Security requirements . 11
Bibliography . 13
Table 1 – CCIS functions required for CCIS entities . 8
Table 2 – Security requirements for CCIS functions . 12
---------------------- Page: 8 ----------------------
SIST EN IEC 63246-2:2022
IEC 63246-2:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONFIGURABLE CAR INFOTAINMENT SERVICES (CCIS) –
Part 2: Requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63246-2 has been prepared by technical area 17: Multimedia systems and equipment for
vehicles, of IEC technical committee 100: Audio, video and multimedia systems and equipment.
It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
100/3508/CDV 100/3627/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
A list of all parts in the IEC 63246 series, published under the general title Configurable car
infotainment services (CCIS), can be found on the IEC website.
---------------------- Page: 9 ----------------------
SIST EN IEC 63246-2:2022
– 4 – IEC 63246-2:2022 © IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN IEC 63246-2:2022
IEC 63246-2:2022 © IEC 2022 – 5 –
INTRODUCTION
The market for car infotainment services (also known as "in-vehicle infotainment systems") has
been growing rapidly, as reflected by the growth of the associated industries. It is expected that
a variety of car infotainment (or multimedia) devices and services will be developed in the future.
Such devices include navigation, cameras, speakers, headrest displays, air-conditioners,
thermometers, heated seats, and lights. It is also expected that some devices will be developed
to provide 4-dimensional experiences for users.
Car infotainment systems typically include A/V features (such as standard radio and CD players),
and two-way communications tools, as well as hands-free phone connections, vehicle voice
commands, and other types of interactive audios or videos. Car infotainment systems have
evolved to allow passengers to watch movies and other visual media (for example, DVD players
installed on the rear seats). Another distinctive feature of future car infotainment systems is
mobile device connectivity. Newer vehicles will provide a wide range of systems that allow
devices (e.g. smartphones and laptops) to be connected to a variety of services embedded in
the vehicle.
From this observation, there is a crucial need for standardization to provide car infotainment
users with more enhanced services so as to easily manage and control infotainment devices as
well as content within a car.
The purpose of the IEC 63246 series is to specify the general considerations, requirements,
framework, and protocols to provide car users with the functionality of managing and controlling
device and content resources within a car.
The IEC 63246 series consists of the following parts:
– Part 1: General;
– Part 2: Requirements;
– Part 3: Framework; and
– Part 4: P
...
SLOVENSKI STANDARD
oSIST prEN IEC 63246-2:2021
01-februar-2021
Multimedijski sistemi in oprema za avtomobile - Nastavljiva avtomobilska
informacijska vzdrževalna storitev (CCIS) - 2. del: Zahteve (TA 17)
Multimedia systems and equipment for cars - Configurable Car Infotainment Services
(CCIS) - Part 2: Requirements (TA 17)
Systèmes multimédia et équipements pour les véhicules - Services d'infodivertissements
configurables pour les véhicules (CCIS) - Partie 2 : Exigences (TA 17)
Ta slovenski standard je istoveten z: prEN IEC 63246-2:2020
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
oSIST prEN IEC 63246-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 63246-2:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 63246-2:2021
100/3508/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63246-2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-12-11 2021-03-05
SUPERSEDES DOCUMENTS:
100/3416/CD, 100/3485/CC
IEC TA 17 : MULTIMEDIA SYSTEMS AND EQUIPMENT FOR VEHICLES
SECRETARIAT: SECRETARY:
Korea, Republic of Mr Ock-Woo Nam
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Multimedia systems and equipment for cars - Configurable Car Infotainment Services (CCIS) –
Part 2: Requirements (TA 17)
PROPOSED STABILITY DATE: 2024
NOTE FROM TC/SC OFFICERS:
Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 63246-2:2021
IEC CDV 63246-2 IEC:2020 – 2 – 100/3508/CDV
Meeting Date
Version Description
(Place)
1 May 2019 - Initial draft text of CCIS-2 was proposed.
(London) - CCIS-2 NP ballot processing was initiated.
2 October 2019 - NP ballot was approved.
(Shanghai) - CCIS-2 CD ballot processing was initiated.
3 September 2020 - CD ballot was approved.
(On-line) - CCIS-2 CDV ballot processing will be initiated.
4
0
1
2 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 5
5 1. Scope . 6
6 2. Normative references . 6
7 3. Definitions and terminology . 6
8 4. General requirements . 6
9 4.1. General . 6
10 4.2. User registration and deregistration . 6
11 4.3. Device registration and deregistration . 7
12 4.4. Profile management . 7
13 4.5. Service provisioning according to authority . 7
14 4.6. Device monitoring . 7
15 4.7. Device control . 7
16 4.8. Content delivery . 7
17 5. Functional requirements for functional entity . 7
18 5.1. General . 7
19 5.2. CCIS user . 8
20 5.2.1. General . 8
21 5.2.2. Registration and deregistration . 8
22 5.2.3. Authentication and authorization . 8
23 5.2.4. Device control . 8
24 5.2.5. Content delivery . 8
25 5.3. CCIS device . 9
26 5.3.1. General . 9
27 5.3.2. Registration and deregistration . 9
28 5.3.3. Status report. 9
29 5.3.4. Interaction for device control . 9
30 5.3.5. Interaction for content delivery . 9
31 5.4. CCIS master . 9
32 5.4.1. General . 9
33 5.4.2. Registration of CCIS users . 9
34 5.4.3. Device registration . 10
35 5.4.4. Device control . 10
---------------------- Page: 4 ----------------------
oSIST prEN IEC 63246-2:2021
IEC CDV 63246-2 IEC:2020 – 3 – 100/3508/CDV
36 5.4.5. Device monitoring . 10
37 5.4.6. Content delivery . 10
38 6. Service requirements for CCIS users . 10
39 6.1. General . 10
40 6.2. Car Owner . 10
41 6.3. Temporary Owner . 10
42 6.4. Private Client . 11
43 6.5. Public Client . 11
44 7. Security requirements . 11
45 Bibliography . 12
46
47
---------------------- Page: 5 ----------------------
oSIST prEN IEC 63246-2:2021
IEC CDV 63246-2 IEC:2020 – 4 – 100/3508/CDV
48 INTERNATIONAL ELECTROTECHNICAL COMMISSION
49 ____________
50 MULTIMEDIA SYSTEMS AND EQUIPMENT FOR VEHICLES –
51
52 CONFIGURABLE CAR INFOTAINMENT SERVICES (CCIS) –
53
54 PART 2: REQUIREMENTS
55 FOREWORD
56 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
57 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
58 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
59 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
60 Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National
61 Committee interested in the subject dealt with shall participate in this preparatory work. International, governmental and non-
62 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the
63 International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
64 organizations.
65 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
66 opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
67 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that
68 sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot
69 be held responsible for the way in which they are used or for any misinterpretation by any end user.
70 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the
71 maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the
72 corresponding national or regional publication shall be clearly indicated in the latter.
73 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
74 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
75 independent certification bodies.
76 6) All users should ensure that they have the latest edition of this publication.
77 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
78 technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
79 whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or
80 reliance upon, this IEC Publication or any other IEC Publications.
81 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for
82 the correct application of this publication.
83 9) Attention is drawn to the possibility that some of the elements of this IEC Publication shall be the subject of patent rights. IEC
84 shall not be held responsible for identifying any or all such patent rights.
85 International Standard IEC 63246 has been prepared by the technical area 17: multimedia systems and
86 equipment for vehicles, of IEC technical committee 100:
87 The text of this standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
88
89 Full information on the voting for the approval of this standard can be found in the report on voting
90 indicated in the above table.
91 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
92 The committee has decided that the contents of this publication will remain unchanged until the stability
93 date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific
94 publication. At this date, the publication will be
95 • reconfirmed,
96 • withdrawn,
97 • replaced by a revised edition, or
98 • amended.
99 The National Committees are requested to note that for this publication the stability date is .
100 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED AT THE
101 PUBLICATION STAGE.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 63246-2:2021
IEC CDV 63246-2 IEC:2020 – 5 – 100/3508/CDV
102 INTRODUCTION
103 It is noted that the markets on car infotainment services (as known as in-vehicle infotainment
104 systems) have been growing rapidly, as shown in the growth of the associated industries. It is
105 expected that a variety of car infotainment (or multimedia) devices and services will be newly
106 developed in the future. Such devices include navigations, cameras, speakers, headrest
107 displays, air-conditioners, thermometers and heating seats, and lights. It is also expected that
108 some devices will be developed to provide 4-dimensional experiences for user.
109 Car infotainment systems typically include A/V features (such as standard radio and CD players),
110 and two-way communication tools as well as hands-free phone connections, vehicle voice
111 commands and other types of interactive audios or videos. The car infotainment systems will
112 be evolved to allow passengers to watch movies and other visual media, as shown in the rear
113 seat with DVD capability. Another distinctive feature in the future infotainment systems is the
114 mobile device connectivity. Newer vehicles will provide a wide range of systems that allow
115 devices (e. g., smartphones and laptops) to be connected to a variety of services embedded in
116 the vehicle.
117 From this observation, there is a crucial need on the standardization to provide car infotainment
118 users with more enhanced services so as to easily manage and control infotainment devices as
119 well as contents within a car.
120 The purpose of the IEC 63246 (Configurable Car Infotainment Services, CCIS) series is to
121 specify the general considerations, requirements, framework, and protocols so as to provide
122 car users with the functionality of managing and controlling the device and contents resources
123 within a car.
124 The International Standards IEC 63246 consists of the following parts:
125 - Part 1: general;
126 - Part 2: requirements;
127 - Part 3: framework; and
128 - Part 4: protocol.
129
130 Part 1 of IEC 63246 describes the general considerations of CCIS, which includes the CCIS
131 system model and the types of CCIS users with the associated service flows.
132 Part 2 of IEC 63246 describes the requirements for CCIS, which includes the CCIS functional
133 and service requirements.
134 Part 3 of IEC 63246 describes the CCIS framework, which includes the information flows
135 between CCIS functional entities, such as registration, device monitoring and control, and
136 content delivery.
137 Part 4 of IEC 63246 describes the CCIS protocol, which include the protocol messages and
138 parameters, protocol procedures, implementation guidelines, etc.
139
---------------------- Page: 7 ----------------------
oSIST prEN IEC 63246-2:2021
IEC CDV 63246-2 IEC:2020 – 6 – 100/3508/CDV
140 MULTIMEDIA SYSTEMS AND EQUIPMENT FOR VEHICLES –
141
142 CONFIGURABLE CAR INFOTAINMENT SERVICES (CCIS) –
143
144 PART 2: REQUIREMENTS
145
146 1. Scope
147 This part of IEC 63246 specifies the CCIS requirements, which include the general, functional
148 and service requirements for CCIS.
149 2. Normative references
150 The following document is referred to in the text in such a way that some or all of their content
151 constitutes requirements of this document. For dated references, only the edition cited applies.
152 For undated references, the latest edition of the referenced document (including any
153 amendments) applies.
154 • IEC 63246-1, Multimedia Systems and Equipment for Vehicles - Configurable Car
155 Infotainment Services – Part 1: General (20XX)
156
157 3. Definitions and terminology
158 For the purposes of this document, the terms and definitions given in IEC 63246-1 apply.
159
160 4. General requirements
161 4.1. General
162 This clause describ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.