SIST EN 3745-517:2012

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test

This European Standard specifies a method of determining the attenuation variation of an optical cable when clamped to a mandrel with cable ties, simulating the condition in an installed harness.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung für Kabelbinder

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Dämpfungsänderung einer optischen Leitung fest, während diese mit Kabelbindern an einem Dorn befestigt ist, um die Bedingungen in einem installierten Kabelbaum zu simulieren.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettage

La présente Norme Européenne spécifie une méthode pour déterminer la variation d’atténuation d’un câble optique lorsqu’il est maintenu sur un mandrin avec des frettes de câblage, simulant les conditions d’installation dans un harnais.

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 517. del: Preskus zategljivosti kabelskih vezic

Ta evropski standard določa metodo za ugotavljanje sprememb v slabljenju optičnega kabla, ki je z kabelskimi vezicami pritrjen na trn, s čimer se posnema stanje na nameščenem pasovju.

General Information

• Status: Withdrawn
• Publication Date: 09-Sep-2012
• Withdrawal Date: 11-Apr-2017
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Apr-2017
• Due Date: 05-May-2017
• Completion Date: 12-Apr-2017
• Ref Project: EN 3745-517:2012 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test

Relations

• Replaced By: SIST EN 3745-517:2017 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
• Effective Date: 29-Mar-2017
• Revised: SIST EN 3745-517:2017 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
• Effective Date: 12-Mar-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung für KabelbinderSérie aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettageAerospace series - Fibres and cables, optical, aircraft use - Test methods
- Part 517: Cable tie clamping test49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-517:2012SIST EN 3745-517:2012en,de01-oktober-2012SIST EN 3745-517:2012SLOVENSKI
STANDARD



SIST EN 3745-517:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3745-517
July 2012 ICS 49.090 English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettage
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung mit Kabelbindern This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3745-517:2012: ESIST EN 3745-517:2012



EN 3745-517:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Preparation of specimens .44Apparatus .45Method .5 SIST EN 3745-517:2012



EN 3745-517:2012 (E) 3 Foreword This document (EN 3745-517:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association,
...