SIST EN ISO 15526-2:2004

Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)

Kunststoffe - Polyketon(PK)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 15526-2:2000)

Dieser Teil von ISO 15526 legt die Verfahren zur Herstellung von Probekörpern und die anzuwendenden Prüfverfahren zur Bestimmung der Eigenschaften von Polyketon-Formmassen fest. Die Anforderungen hinsichtlich der Handhabung der untersuchten Formmasse und hinsichtlich der Konditionierung der Formmasse vor der Formgebung und der Probekörper vor dem Prüfen werden ebenfalls angegeben.
Die Norm gibt die Verfahrensweise und die Bedingungen zur Herstellung von Probekörpern sowie die Verfahren zum Messen der Eigenschaften der Formmasse, aus der die Probekörper hergestellt wurden, vor. Des Weiteren erfolgt die Angabe der Eigenschaften und Prüfverfahren, die zur Charakterisierung von Polyketon-Formmassen geeignet und notwendig sind.
Die Eigenschaften wurden aus den in den allgemeinen Prüfverfahren von ISO 10350:1993 berücksichtigten Eigenschaften ausgewählt. Neben den Prüfverfahren für die in Teil 1 festgelegten kennzeichnenden Eigenschaften (Viskositätszahl und Zugelastizitätsmodul) sind andere Prüfverfahren, die für Formmassen breite Anwendung finden oder für diese von besonderer Signifikanz sind, in diesem Teil von ISO 15526 berücksichtigt.
Um reproduzierbare und vergleichbare Prüfergebnisse zu erhalten, müssen die in dieser Norm festgelegten Verfahren zur Probekörperherstellung und -konditionierung, die Probekörpermaße und die Prüfverfahren eingehalten werden. Die bestimmten Werte werden nicht zwangsläufig mit denen identisch sein, die für Probekörper mit anderen Maßen oder für nach anderen Verfahren hergestellten Probekörpern erhalten werden.

Plastiques - Polycétone (PK) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 15526-2:2000)

Polimerni materiali - Materiali za oblikovanje in ekstrudiranje na osnovi poliketonov (PK) - 2. del: Priprava preskušancev in določanje lastnosti - (ISO 15526-2:2000)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2004
• Withdrawal Date: 25-Mar-2014
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-Mar-2014
• Due Date: 17-Apr-2014
• Completion Date: 26-Mar-2014
• Ref Project: EN ISO 15526-2:2004 - Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)

Relations

• Replaced By: SIST EN ISO 21970-2:2018 - Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2018)
• Effective Date: 20-Feb-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2004
3ROLPHUQLPDWHULDOL0DWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQDRVQRYL
SROLNHWRQRY3.GHO3ULSUDYDSUHVNXãDQFHYLQGRORþDQMHODVWQRVWL,62

Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test
specimens and determination of properties (ISO 15526-2:2000)
Kunststoffe - Polyketon(PK)-Formmassen - Teil 2: Herstellung von Probekörpern und
Bestimmung von Eigenschaften (ISO 15526-2:2000)
Plastiques - Polycétone (PK) pour moulage et extrusion - Partie 2: Préparation des
éprouvettes et détermination des propriétés (ISO 15526-2:2000)
Ta slovenski standard je istoveten z: EN ISO 15526-2:2004
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15526-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 83.080.20
English version
Plastics - Polyketone (PK) moulding and extrusion materials -
Part 2: Preparation of test specimens and determination of
properties (ISO 15526-2:2000)
Plastiques - Polycétone (PK) pour moulage et extrusion - Kunststoffe - Polyketon(PK)-Formmassen - Teil 2:
Partie 2: Préparation des éprouvettes et détermination des Herstellung von Probekörpern und Bestimmung von
propriétés (ISO 15526-2:2000) Eigenschaften (ISO 15526-2:2000)
This European Standard was approved by CEN on 21 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15526-2:2004: E
worldwide for CEN national Members.

Foreword
The text of ISO 15526-2:2000 has been prepared by Technical Committee ISO/TC 61 "Plastics”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
15526-2:2004 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held
by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 15526-2:2000 has been approved by CEN as EN ISO 15526-2:2004 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).

Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.

Publication Year Title EN Year

EN ISO 62 1999
ISO 62 1999 Plastics - Determination of water
absorption
ISO 75-1 1993 Plastics - Determination of EN ISO 75-1 1996
temperature of deflection under load
- Part 1: General test method
ISO 75-2 1993 Plastics - Determination of EN ISO 75-2 1996
temperature of deflection under load
- Part 2: Plastics and ebonite

ISO 291 1997 Plastics - Standard atmospheres for EN ISO 291 1997
conditioning and testing
ISO 294-1 1996 Plastics - Injection moulding of test EN ISO 294-1 1998
specimens of thermoplastic
materials - Part 1: General
principles, and moulding of
multipurpose and bar test
specimens
ISO 527-1 1993 Plastics - Determination of tensile EN ISO 527-1 1996
properties - Part 1: General
principles
ISO 527-2 1993 Plastics - Determination of tensile EN ISO 527-2 1996
properties - Part 2: Test conditions
for moulding and extrusion plastics

ISO 1133 1997 Plastics - Determination of the melt EN ISO 1133 1999
mass-flow rate (MFR) and the melt
volume-flow rate (MVR) of
thermoplastics
ISO 2818 1994 Plastics - Preparation of test EN ISO 2818 1996
specimens by machining
ISO 3146 2000 Plastics - Determination of melting EN ISO 3146 2000
behaviour (melting temperature or
melting range) of semi-crystalline
polymers by capillary tube and
polarizing-microscope methods
ISO 4589-2 1996 Plastics - Determination of burning ISO 4589-2 1999
behaviour by oxygen index - Part 2:
Ambient-temperature test
ISO 6603-2 2000 Plastics - Determination of puncture EN ISO 6603-2 2000
impact behaviour of rigid plastics -
Part 2: Instrumented puncture test

INTERNATIONAL ISO
STANDARD 15526-2
First edition
2000-06-01
Plastics — Polyketone (PK) moulding and
extrusion materials —
Part 2:
Preparation of test specimens and
determination of properties
Plastiques — Polycétone (PK) pour moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
Reference number
ISO 15526-2:2000(E)
ISO 15526-2:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's mem-
ber body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2000 – All rights reserved

ISO 15526-2:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commis-
sion (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 15526 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15526-2 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee
SC 9, Thermoplastic materials.
ISO 15526 consists of the following parts, under the general title Plastics — Polyketone (PK) moulding and extrusion
materials:
— Part 1: Designation system and basis for specifications
— Part 2: Preparation of test specimens and determination of properties
©
ISO 2000 – All rights reserved iii

INTERNATIONAL STANDARD ISO 15526-2:2000(E)
Plastics — Polyketone (PK) moulding and extrusion materials —
Part 2:
Preparation of test specimens and determination of properties
1 Scope
This part of ISO 15526 specifies the methods of preparation of test specimens and the test methods to be used in
determining the properties of polyketone moulding and extrusion materials. Requir
...