SIST EN 61300-3-25:1997

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed

EN following parallel vote

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren -- Teil 3-25: Untersuchungen und Messungen - Konzentrizität der Stifte und der Stifte mit eingebauter Faser

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 3-25: Examens et mesures - Concentricité des embouts et des embouts avec fibre

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed (IEC 61300-3-25:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 08-Oct-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Oct-2014
• Due Date: 01-Nov-2014
• Completion Date: 09-Oct-2014
• Ref Project: EN 61300-3-25:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed

Relations

• Replaced By: SIST EN 61300-3-25:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
• Effective Date: 29-Jan-2023
• Revised: SIST EN 61300-3-25:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61300-3-25:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
• Effective Date: 07-Jun-2022
• Revised: SIST EN 61300-3-25:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
• Effective Date: 03-May-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-25:1997
01-december-1997
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-25: Examinations and measurements -
Concentricity of the ferrules and ferrules with fibre installed (IEC 61300-3-25:1997)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-25: Examinations and measurements - Concentricity
of the ferrules and ferrules with fibre installed
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 3-25: Untersuchungen und Messungen - Konzentrizität der Stifte
und der Stifte mit eingebauter Faser
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-25: Examens et mesures -
Concentricité des embouts et des embouts avec fibre
Ta slovenski standard je istoveten z: EN 61300-3-25:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-25:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-25:1997

---------------------- Page: 2 ----------------------

SIST EN 61300-3-25:1997

---------------------- Page: 3 ----------------------

SIST EN 61300-3-25:1997

---------------------- Page: 4 ----------------------

SIST EN 61300-3-25:1997
NORME
CEI
INTERNATIONALE
IEC
61300-3-25
INTERNATIONAL
Première édition
STANDARD
First edition
1997-03
Dispositifs d’interconnexion et composants
passifs à fibres optiques – Méthodes
fondamentales d’essais et de mesures –
Partie 3-25:
Examens et mesures –
Concentricité des embouts et des
embouts avec fibre
Fibre optic interconnecting devices
and passive components – Basic test
and measurement procedures –
Part 3-25:
Examinations and measurements –
Concentricity of the ferrules and
ferrules with fibre installed
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni utilisée No part of this publication may be reproduced or utilized in
sous quelque forme que ce soit et par aucun procédé, électronique any form or by any means, electronic or mechanical, including
ou mécanique, y compris la photocopie et les microfilms, sans photocopying and microfilm, without permission in writing from
l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE G
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 61300-3-25:1997
61300-3-25 © IEC: 1997 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
–––––––––
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-25: Examinations and measurements – Concentricity of the ferrules
and ferrules with fibre installed
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-25 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/847/FDIS 86B/948/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 1300 consists of the following parts, under the general title Fibre optic interconnecting
devices and passive components – Basic test and measurement procedures:
– Part 1: General and guidance
– Part 2: Tests
– Part 3: Examinations and measurements

---------------------- Page: 6 ----------------------

SIST EN 61300-3-25:1997
61300-3-25 © IEC: 1997 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-25: Examinations and measurements – Concentricity of the ferrules
and ferrules with fibre installed
1 General
1.1 Scope and object
This part of IEC 1300 describes the procedure to determine the concentricity of the inner
diameter of a ferrule relative to the outer diameter, or in the case of ferrules with fibre installed,
to determine the concentricity of the fibre core axis with the outer diameter of the ferrule.
1.2 Normative reference
The following normative document contains provisions which, through reference in this text,
constitute provisions of this part of IEC 1300. At the time of publication, the edition indicated
was valid. All normative documents
...