Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-003 and EN 3155-009.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 008: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Diese Norm legt die Anforderungen, Prüfungen und Werkzeuge für elektrische Stiftkontakte 008, Typ A, crimpbar, Klasse S, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Sie ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155 003 und EN 3155 009 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion et optique - Partie 008 : Contacts électriques, mâles, type A, a sertir, classe S - Norme de produit

Aeronavtika – Električni kontakti za uporabo v veznih elementih – 008. del: Električni kontakti, moški, tip A, nagubani, razred S – Standard za proizvod

General Information

Status
Withdrawn
Publication Date
31-Aug-2006
Withdrawal Date
18-Sep-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Sep-2019
Due Date
12-Oct-2019
Completion Date
19-Sep-2019

Relations

Buy Standard

Standard
EN 3155-008:2006
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standardSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion et optique - Partie 008 : Contacts électriques, mâles, type A, a sertir, classe S - Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 008: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - ProduktnormTa slovenski standard je istoveten z:EN 3155-008:2005SIST EN 3155-008:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3155-008:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-008December 2005ICS 49.060 English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 008: Contacts, electrical, male, type A, crimp,class S - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion et optique - Partie 008 : Contactsélectriques, mâles, type A, à sertir, classe S - Norme deproduitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 008: ElektrischeStiftkontakte, Typ A, crimpbar, Klasse S - ProduktnormThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-008:2005: E



EN 3155-008:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code.8 4.4 Material, surface treatment.8 4.5 Permissible cables.8 4.6 Tooling.9 4.7 Cable stripping.12 4.8 Tests.12 4.9 Gauges.14 5 Designation.14 6 Marking.15 7 Technical specification.15



EN 3155-008:2005 (E) 3 Foreword This European Standard (EN 3155-008:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3155-008:2005 (E) 4 Introduction The contacts defined by this standard are derived from those of MIL-C-39029/58 and intermateable with those of MIL-C-39029/56 and MIL-C-39029/57. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-003 and EN 3155-009. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system. EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard. EN 2591*, Aerospace series — Elements of electrical and optical connection — Test methods — General. EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification.1) EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts.1) EN 3155-003, Aerospace series — Electrical contacts used in elements of connection — Part 003: Contacts, electrical, female, type A, crimp, class S — Product standard.1) EN 3155-009, Aerospace series — Electrical contacts used in elements of connection — Part 009: Contacts, electrical, female, type A, crimp, class S — Product standard.1) EN 4008-009, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 009: Positioner for crimping tool M22520/23 — Product standard.2) EN 4008-010, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 010: Head for crimping tool M22520/23 — Product standard.2)
* All its parts quoted in this standard. 1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard.



EN 3155-008:2005 (E) 5 MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for.3) MIL-C-39029, Contacts, electrical connector, general specification for.3) MIL-C-39029/56, Contacts, electrical connec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.