SIST EN 15813:2011

Polymer modified bituminous thick coatings - Determination of flexibility at low temperatures

This European Standard specifies a procedure for determining the flexibility of polymer modified bituminous thick coatings at low temperatures. This European Standard has been prepared for applications in below ground structures, but it may also be used in other areas where waterproofing is relevant, e. g. balconies or wet rooms.

Kunststoffmodifizierte Bitumendickbeschichtungen - Bestimmung der Flexibilität bei niedrigen Temperaturen

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Flexibilität von kunststoffmodifizierten Bitumendickbeschichtungen zur Bauwerksabdichtung bei niedrigen Temperaturen fest.

Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la souplesse à basse température

La présente Norme européenne spécifie une méthode permettant de déterminer la souplesse à basse température des revêtements bitumineux épais modifiés aux polymères pour imperméabilisation.

Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Določanje upogljivosti pri nizki temperaturi

Ta evropski standard določa postopek za določanje upogljivosti bitumenskih debeloslojnih prevlek za tesnjenje, modificiranih s polimeri, pri nizki temperaturi. Ta evropski standard je bil pripravljen za uporabo pri podzemnih strukturah, lahko pa se uporablja tudi na drugih območjih, kjer je hidroizolacija pomembna, npr. na balkonih ali v vlažnih prostorih.

General Information

• Status: Published
• Publication Date: 10-May-2011
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: VLA - Water proofing
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Apr-2011
• Due Date: 18-Jun-2011
• Completion Date: 11-May-2011
• Ref Project: EN 15813:2011 - Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffmodifizierte Bitumendickbeschichtungen - Bestimmung der Flexibilität bei niedrigen TemperaturenPolymer modified bituminous thick coatings - Determination of flexibility at low temperatures91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15813:2011SIST EN 15813:2011en,fr,de01-junij-2011SIST EN 15813:2011SLOVENSKI
STANDARD



SIST EN 15813:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15813
March 2011 ICS 91.100.50 English Version
Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la souplesse à basse température
Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung - Bestimmung der Flexibilität bei niedrigen Temperaturen This European Standard was approved by CEN on 13 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15813:2011: ESIST EN 15813:2011



EN 15813:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Term and definition.44Principle .45Apparatus .46Test specimens .57Preparation .58Procedure .59Expression of results and precision .59.1Expression of results .59.2Precision .510Test report .6 SIST EN 15813:2011



EN 15813:2011 (E) 3 Foreword This document (EN 15813:2011) has been prepared by Technical Committee CEN/TC 361 “Project Committee — Polymer
...