Specification and testing of LPG cylinder valves - Self closing

This European Standard specifies the requirements for design, specification and type testing for self-closing cylinder valves specifically for use with LPG. It includes references to associated equipment for vapour or liquid service.
NOTE   Annex B gives recommendations for production testing and inspection.
This European Standard applies to self-closing valves fitted to transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity intended to convey LPG only.
This European Standard does not apply to fixed automotive installations.

Spezifikation und Prüfung der LPG-Zylinderventile - Selbstschließend

Diese Europäische Norm legt für selbstschließende Flaschenventile, die für die Anwendung mit Flüssiggas (LPG) vorgesehen sind, die Anforderungen an die Konstruktion, Spezifikation und Typprüfung fest. Sie enthält Verweisungen auf Zubehör für den Betrieb in der Gas-und Flüssigphase.
Anmerkung   : Anhang B enthält Empfehlungen zur Produktionsüberwachung und Prüfung.
Diese Europäische Norm erfasst selbstschließende Ventile an ortsbeweglichen und wiederbefüllbaren Flüssiggas-Flaschen mit einem Fassungsraum von 0,5 l bis einschließlich 150 l, die nur zum Transport von Flüssiggas vorgesehen sind.
Diese Europäische Norm gilt nicht für in Fahrzeuge fest eingebaute Gassysteme.

Spécifications et essais pour valves de bouteilles de GPL - Fermeture automatique

La présente Norme européenne spécifie les exigences concernant la conception, les spécifications et les essais de type des valves a fermeture automatique, montées sur des bouteilles, et spécifiquement conçues pour une utilisation avec des gaz de pétrole liquéfiés (GPL). Elle comprend des références aux équipements associés pour le service en phase gazeuse ou liquide.
NOTE   L'annexe B fournit des recommandations relatives aux essais et contrôles en cours de fabrication.
La présente Norme européenne s'applique aux valves a fermeture automatique installées sur les bouteilles de GPL transportables et rechargeables, d'une capacité en eau de 0,5 l a 150 l, destinées exclusivement au transport de GPL.
La présente Norme européenne ne s'applique pas aux installations automobiles fixes.

Specifikacija in preskušanje ventilov za jeklenke za utekočinjeni naftni plin (UNP) - Samozaporni ventili

General Information

Status
Withdrawn
Publication Date
30-Apr-2002
Withdrawal Date
13-Sep-2010
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Sep-2010
Due Date
06-Oct-2010
Completion Date
14-Sep-2010

Relations

Buy Standard

Standard
EN 13152:2002
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spezifikation und Prüfung der LPG-Zylinderventile - SelbstschließendSpécifications et essais pour valves de bouteilles de GPL - Fermeture automatiqueSpecification and testing of LPG cylinder valves - Self closing23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13152:2001SIST EN 13152:2002en01-maj-2002SIST EN 13152:2002SLOVENSKI
STANDARD



SIST EN 13152:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13152December 2001ICS 23.060.40English versionSpecification and testing of LPG cylinder valves - Self closingSpécifications et essais pour valves de bouteilles de GPL -Fermeture automatiqueSpezifikation und Prüfung der LPG-Zylinderventile -SelbstschließendThis European Standard was approved by CEN on 25 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13152:2001 ESIST EN 13152:2002



EN 13152:2001 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Design and specification.74.1General.74.2Materials.74.2.1General.74.2.2Operating temperatures.84.2.3Copper alloys.84.2.4Non-metallic materials.84.3Essential components.84.3.1Valve operating mechanism.84.3.2Valve body.84.3.3Sealing mechanism.94.3.4Valve stem.94.3.5Valve outlet.94.4Optional components.94.4.1Pressure relief valve.94.4.2Eduction tube.94.4.3Excess flow device.94.4.4Non-return valve.94.4.5Sediment tube.104.5Valve connections.105Valve type test.105.1General.105.2Test valves.105.3Test procedure.105.3.1Hydraulic pressure test.115.3.2Valve closure test.125.3.3External and internal tightness test.125.3.4Endurance test.125.3.5Simulated vacuum test.135.3.6Operation test.135.3.7Valve stem test.145.3.8Impact test.145.4Acceptance criteria.156Markings.15Annex A (normative)
Valve dimensions.16Annex B (informative)
Production testing and inspection.17Annex C (normative)
Special requirements for cylinder valves under extreme low temperatureconditions (minus 40 °C).18Bibliography.19SIST EN 13152:2002



EN 13152:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 286 "Liquefied Petroleum GasEquipment and Accessories", the secretariat of which is held by NSAI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest byJune 2002.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).In this standard the annexes A and C are normative and the annex B is informative.The standard has been submitted for reference into the RID and/or in the technical annexes of the ADR. Thereforethe standards listed in the normative references and covering basic requirements of the RID/ADR not addressedwithin the present standard are normative only when the standards themselves are referred to in the RID and/or inthe technical annexes of the ADR.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13152:2002



EN 13152:2001 (E)4IntroductionThis European Standard calls for the use of substances and procedures that can be injurious to health if adequateprecautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligationsrelating to health and safety at any stage.It has been assumed in the drafting of this European Standard that execution of its provisions is entrusted toappropriately qualified and experienced people.SIST EN 13152:2002



EN 13152:2001 (E)51 ScopeThis European Standard specifies the requirements for design, specification and type testing for self-closingcylinder valves specifically for use with LPG. It includes references to associated equipment for vapour or liquidservice.NOTEAnnex B gives recommendations for production testing and inspection.This European Standard applies to self-closing valves fitted to transportable refillable LPG cylinders from 0,5 l up to150 l water capacity intended to convey LPG only.This European Standard does not apply to fixed automotive installations.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this Europeanstandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment.EN 629-1, Transportable gas cylinders – 25E taper thread for connection of valves to gas cylinders – Part 1:Specification.EN ISO 11116, Gas cylinders – 17E taper thread for connections of valves to gas cylinders – Part 1: Specifications.EN 12164, Copper and copper alloys – Rod for free machining purposes.EN 12165, Copper and copper alloys – Wrought and unwrought forging stock.prEN 12864, Low pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to200 mbar with a capacity of less than or equal to 4 kg/h, and their associated devices for butane, propane or theirmixtures.prEN 13175, Specifications and testing for Liquefied Petroleum Gas (LPG) tank valves.prEN 13953, Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG).3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1LPGmixture of light hydrocarbons, gaseous under standard atmospheric conditions, which can be liquefied by increasedpressure or decreased temperature. The main components are propene, propane and butene isomers3.2cylinder valvevalve designed for use in one or more of the following applications: liquid filling, liquid service, vapour service, liquidlevel indicationSIST EN 13152:2002



EN 13152:2001 (E)63.3external tightnessresistance to leakage through the valve body to or from the atmosphere3.4internal tightnessresistance to leakage across the valve seat, or other internal sealing components, when the valve is closed3.5eduction tubetube fitted to the valve to allow withdrawal of liquid LPG with the cylinder in its normal operating position3.6fixed liquid level gaugecontrol device, such as a dip tube in combination with a vent valve to verify that the predetermined maximum liquidlevel in a cylinder has been reached3.7liquid level indicatorcontrol device, such as a float gauge, permitting the gauging of the liquid level in the cylinder3.8valve bodymajor valve component including valve stem and/or valve outlet and, where applicable, the provision for otheroptional components3.9excess flow devicedevice designed to close or partially close when the flow of liquid or vapour passing through it exceeds apredetermined value and to re-open when the pressure differential across the valve has been restored below acertain value3.10non-return valvevalve designed to close automatically to restrict reverse flow3.11vapour/liquid dual valvevalve designed to allow vapour and liquid withdrawal from a cylinder in its normal operating position3.12sealing elementelement used to provide internal leak tightness3.13valve stemsection of the valve body which connects to the cylinder3.14valve outletsection of the valve to which a regulator or connector can be fitted3.15type testtest or series of tests conducted to prove that the design meets the requirements of this standard3.16cylinder openingpart of the cylinder to which the valve stem connectsSIST EN 13152:2002



EN 13152:2001 (E)73.17quick coupling connectorsystem which enables an appliance or equipment to be connected to a cylinder valve without the use of tools3.18test pressurepressure at which the valve or component is tested in bar gauge3.19sediment tubedevice designed to reduce the risk of foreign matter, which may be in the cylinder, entering the valve3.20protection cap/dust capdevice fitted to the valve outlet and intended for one or more of the following functions: to protect the outlet; to prevent the ingress of foreign matter; to indicate unauthorised manipulation.3.21sealing capdevice fitted to, or integral with, the outlet of the cylinder valve to provide secondary closure3.22valve operating mechanismmechanism that opens the valve when, or
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.