oSIST prEN ISO 15193:2024
(Main)In vitro diagnostic medical devices - Requirements for reference measurement procedures (ISO/DIS 15193:2023)
In vitro diagnostic medical devices - Requirements for reference measurement procedures (ISO/DIS 15193:2023)
DOW = DAV + 36 months
In‑vitro-Diagnostika - Anforderungen an Referenzmessverfahren (ISO/DIS 15193:2023)
Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Exigences relatives au contenu et à la présentation des procédures de mesure de référence (ISO/DIS 15193:2023)
Diagnostični medicinski pripomočki in vitro - Zahteve za referenčne merilne postopke (ISO/DIS 15193:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 15193:2024
01-marec-2024
Diagnostični medicinski pripomočki in vitro - Zahteve za predstavitev referenčnih
merilnih postopkov (ISO/DIS 15193:2023)
In vitro diagnostic medical devices - Requirements for reference measurement
procedures (ISO/DIS 15193:2023)
In‑vitro-Diagnostika - Anforderungen an Referenzmessverfahren (ISO/DIS 15193:2023)
Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des
échantillons d'origine biologique - Exigences relatives au contenu et à la présentation
des procédures de mesure de référence (ISO/DIS 15193:2023)
Ta slovenski standard je istoveten z: prEN ISO 15193
ICS:
11.100.10 Diagnostični preskusni In vitro diagnostic test
sistemi in vitro systems
oSIST prEN ISO 15193:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 15193:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 15193:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15193
ISO/TC 212 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-12-26 2024-03-19
In vitro diagnostic medical devices — Requirements for
reference measurement procedures
ICS: 11.100.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15193:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 15193:2024
ISO/DIS 15193:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15193
ISO/TC 212 Secretariat: ANSI
Voting begins on: Voting terminates on:
In vitro diagnostic medical devices — Requirements for
reference measurement procedures
ICS: 11.100.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15193:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 15193:2024
ISO/DIS 15193:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.