oSIST prEN 6049-005:2023

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard

This document specifies the characteristics of post installation flexible mechanical protection sleeves for electrical cable and cable bundles made from meta-aramid fibres and provided with a water repellent protection.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau - Produktnorm

No Scope available

Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005 : Gaine de protection souple à installer après montage - Norme de produit

Le présent document spécifie les caractéristiques des gaines de protection mécanique souples à installer au montage, pour câbles électriques et torons de câbles, en fibres méta-aramides et dotées d'une protection imperméable.

Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 005. del: Upogljiva obojka z možnostjo poznejše montaže - Standard za proizvod

General Information

• Status: Not Published
• Public Enquiry End Date: 15-Aug-2023
• ICS: 29.060.20 - Cables
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 11-Apr-2024
• Due Date: 30-May-2024
• Ref Project: FprEN 6049-005 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard

Relations

• Revises: SIST EN 6049-005:2015 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
• Effective Date: 05-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 6049-005:2023
01-julij-2023
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih
vlaken - 005. del: Upogljiva obojka z možnostjo poznejše montaže - Standard za
proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 005: Sleeve flexible, post installation - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau -
Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 005 : Gaine de protection souple à installer après montage - Norme de
produit
Ta slovenski standard je istoveten z: prEN 6049-005
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 6049-005:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 6049-005:2023

---------------------- Page: 2 ----------------------
oSIST prEN 6049-005:2023


DRAFT
EUROPEAN STANDARD
prEN 6049-005
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2023
ICS 49.060 Will supersede EN 6049-005:2014
English Version

Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 005: Sleeve
flexible, post installation - Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
005 : Gaine de protection souple à installer après Teil 005: Biegsame Schutzschläuche Nachträglicher
montage - Norme de produit Einbau - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6049-005:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 6049-005:2023
prEN 6049-005:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Composition and mass . 4
4.1.1 Composition of the tows .
...